From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
Rajendra Nayak <rnayak@codeaurora.org>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Alexander Shishkin <alexander.shishkin@linux.intel.com>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
David Brown <david.brown@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Sibi Sankar <sibis@codeaurora.org>,
Vivek Gautam <vivek.gautam@codeaurora.org>,
Leo Yan <leo.yan@linaro.org>, Andy Gross <andy.gross@linaro.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/3] arm64: dts: qcom: sdm845: Add Coresight support
Date: Fri, 11 Jan 2019 11:46:43 -0700 [thread overview]
Message-ID: <20190111184643.GA22691@xps15> (raw)
In-Reply-To: <a13ad49d3ae8d9a5a972027283b7212ab19f97d0.1547054308.git.saiprakash.ranjan@codeaurora.org>
Hi Sai,
On Wed, Jan 09, 2019 at 11:16:47PM +0530, Sai Prakash Ranjan wrote:
> Add coresight components found on Qualcomm SDM845 SoC.
>
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> ---
> .../arm64/boot/dts/qcom/sdm845-coresight.dtsi | 437 ++++++++++++++++++
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +
> 2 files changed, 439 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sdm845-coresight.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-coresight.dtsi b/arch/arm64/boot/dts/qcom/sdm845-coresight.dtsi
> new file mode 100644
> index 000000000000..b6ef250b9186
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm845-coresight.dtsi
> @@ -0,0 +1,437 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SDM845 Coresight DTS
> + *
> + * Copyright (c) 2019, The Linux Foundation. All rights reserved.
> + */
> +
> +&soc {
> + stm@6002000 {
> + compatible = "arm,coresight-stm", "arm,primecell";
> + reg = <0x06002000 0x1000>,
> + <0x16280000 0x180000>;
> + reg-names = "stm-base", "stm-stimulus-base";
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + stm_out: endpoint {
> + remote-endpoint = <&funnel0_in7>;
> + };
> + };
> + };
> + };
> +
> + funnel@6041000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x06041000 0x1000>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + funnel0_out: endpoint {
> + remote-endpoint =
> + <&merge_funnel_in0>;
> + };
> + };
> + };
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@7 {
> + reg = <7>;
> + funnel0_in7: endpoint {
> + remote-endpoint = <&stm_out>;
> + };
> + };
> + };
> + };
> +
> + funnel@6043000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x06043000 0x1000>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + funnel2_out: endpoint {
> + remote-endpoint =
> + <&merge_funnel_in2>;
> + };
> + };
> + };
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@5 {
> + reg = <5>;
> + funnel2_in5: endpoint {
> + remote-endpoint =
> + <&apss_merge_funnel_out>;
> + };
> + };
> + };
> + };
> +
> + funnel@6045000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x06045000 0x1000>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + merge_funnel_out: endpoint {
> + remote-endpoint = <&etf_in>;
> + };
> + };
> + };
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + merge_funnel_in0: endpoint {
> + remote-endpoint =
> + <&funnel0_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> + merge_funnel_in2: endpoint {
> + remote-endpoint =
> + <&funnel2_out>;
> + };
> + };
> + };
> + };
> +
> + replicator@6046000 {
> + compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
> + reg = <0x06046000 0x1000>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + replicator_out: endpoint {
> + remote-endpoint = <&etr_in>;
> + };
> + };
> + };
> +
> + in-ports {
> + port {
> + replicator_in: endpoint {
> + remote-endpoint = <&etf_out>;
> + };
> + };
> + };
> + };
> +
> + etf@6047000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0x06047000 0x1000>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + etf_out: endpoint {
> + remote-endpoint = <&replicator_in>;
> + };
> + };
> + };
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + reg = <1>;
> + etf_in: endpoint {
> + remote-endpoint = <&merge_funnel_out>;
> + };
> + };
> + };
> + };
> +
> + etr@6048000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0x06048000 0x1000>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + in-ports {
> + port {
> + etr_in: endpoint {
> + remote-endpoint = <&replicator_out>;
> + };
> + };
> + };
> + };
> +
> + etm@7040000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + arm,primecell-periphid = <0x000bb95d>;
I'm a little curious as to why you need to bypass the normal AMBA bus discovery
method by forcing the peripheral ID. Tracers don't show up the way other
coresight devices do at boot time?
> + reg = <0x07040000 0x1000>;
> +
> + cpu = <&CPU0>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + etm0_out: endpoint {
> + remote-endpoint = <&apss_funnel_in0>;
> + };
> + };
> + };
> + };
> +
> + etm@7140000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + arm,primecell-periphid = <0x000bb95d>;
> + reg = <0x07140000 0x1000>;
> +
> + cpu = <&CPU1>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + etm1_out: endpoint {
> + remote-endpoint = <&apss_funnel_in1>;
> + };
> + };
> + };
> + };
> +
> + etm@7240000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + arm,primecell-periphid = <0x000bb95d>;
> + reg = <0x07240000 0x1000>;
> +
> + cpu = <&CPU2>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + etm2_out: endpoint {
> + remote-endpoint = <&apss_funnel_in2>;
> + };
> + };
> + };
> + };
> +
> + etm@7340000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + arm,primecell-periphid = <0x000bb95d>;
> + reg = <0x07340000 0x1000>;
> +
> + cpu = <&CPU3>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + etm3_out: endpoint {
> + remote-endpoint = <&apss_funnel_in3>;
> + };
> + };
> + };
> + };
> +
> + etm@7440000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + arm,primecell-periphid = <0x000bb95d>;
> + reg = <0x07440000 0x1000>;
> +
> + cpu = <&CPU4>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + etm4_out: endpoint {
> + remote-endpoint = <&apss_funnel_in4>;
> + };
> + };
> + };
> + };
> +
> + etm@7540000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + arm,primecell-periphid = <0x000bb95d>;
> + reg = <0x07540000 0x1000>;
> +
> + cpu = <&CPU5>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + etm5_out: endpoint {
> + remote-endpoint = <&apss_funnel_in5>;
> + };
> + };
> + };
> + };
> +
> + etm@7640000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + arm,primecell-periphid = <0x000bb95d>;
> + reg = <0x07640000 0x1000>;
> +
> + cpu = <&CPU6>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + etm6_out: endpoint {
> + remote-endpoint = <&apss_funnel_in6>;
> + };
> + };
> + };
> + };
> +
> + etm@7740000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + arm,primecell-periphid = <0x000bb95d>;
> + reg = <0x07740000 0x1000>;
> +
> + cpu = <&CPU7>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + etm7_out: endpoint {
> + remote-endpoint = <&apss_funnel_in7>;
> + };
> + };
> + };
> + };
> +
> + funnel@7800000 { /* APSS Funnel */
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x07800000 0x1000>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + apss_funnel_out: endpoint {
> + remote-endpoint =
> + <&apss_merge_funnel_in>;
> + };
> + };
> + };
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + apss_funnel_in0: endpoint {
> + remote-endpoint =
> + <&etm0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + apss_funnel_in1: endpoint {
> + remote-endpoint =
> + <&etm1_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> + apss_funnel_in2: endpoint {
> + remote-endpoint =
> + <&etm2_out>;
> + };
> + };
> +
> + port@3 {
> + reg = <3>;
> + apss_funnel_in3: endpoint {
> + remote-endpoint =
> + <&etm3_out>;
> + };
> + };
> +
> + port@4 {
> + reg = <4>;
> + apss_funnel_in4: endpoint {
> + remote-endpoint =
> + <&etm4_out>;
> + };
> + };
> +
> + port@5 {
> + reg = <5>;
> + apss_funnel_in5: endpoint {
> + remote-endpoint =
> + <&etm5_out>;
> + };
> + };
> +
> + port@6 {
> + reg = <6>;
> + apss_funnel_in6: endpoint {
> + remote-endpoint =
> + <&etm6_out>;
> + };
> + };
> +
> + port@7 {
> + reg = <7>;
> + apss_funnel_in7: endpoint {
> + remote-endpoint =
> + <&etm7_out>;
> + };
> + };
> + };
> + };
> +
> + funnel@7810000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x07810000 0x1000>;
> +
> + power-domains = <&aoss_qmp AOSS_QMP_QDSS_CLK>;
> +
> + out-ports {
> + port {
> + apss_merge_funnel_out: endpoint {
> + remote-endpoint =
> + <&funnel2_in5>;
> + };
> + };
> + };
> +
> + in-ports {
> + port {
> + apss_merge_funnel_in: endpoint {
> + remote-endpoint =
> + <&apss_funnel_out>;
> + };
> + };
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index c27cbd3bcb0a..03683179b8f7 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -1853,3 +1853,5 @@
> };
> };
> };
> +
> +#include "sdm845-coresight.dtsi"
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-01-11 18:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-09 17:46 [PATCH 0/3] Add coresight support for SDM845 Sai Prakash Ranjan
2019-01-09 17:46 ` [PATCH 1/3] arm64: dts: qcom: sdm845: Add Coresight support Sai Prakash Ranjan
2019-01-11 18:46 ` Mathieu Poirier [this message]
2019-01-12 12:51 ` saiprakash.ranjan
2019-01-14 15:35 ` Mathieu Poirier
2019-01-15 16:29 ` Sai Prakash Ranjan
2019-01-13 7:23 ` Bjorn Andersson
2019-01-15 16:27 ` Sai Prakash Ranjan
2019-01-17 19:50 ` Bjorn Andersson
2019-01-18 3:00 ` Sai Prakash Ranjan
2019-01-09 17:46 ` [PATCH 2/3] coresight: etm4x: Add support to enable ETMv4.2 Sai Prakash Ranjan
2019-01-11 18:52 ` Mathieu Poirier
2019-01-12 12:33 ` saiprakash.ranjan
2019-01-09 17:46 ` [PATCH 3/3] arm64: dts: qcom: sdm845: Remove the duplicate header inclusion Sai Prakash Ranjan
2019-01-09 22:57 ` Doug Anderson
2019-01-10 4:42 ` Sai Prakash Ranjan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190111184643.GA22691@xps15 \
--to=mathieu.poirier@linaro.org \
--cc=alexander.shishkin@linux.intel.com \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sibis@codeaurora.org \
--cc=suzuki.poulose@arm.com \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).