linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Chen-Yu Tsai <wens@csie.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-sunxi@googlegroups.com,
	Jagan Teki <jagan@amarulasolutions.com>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	linux-amarula@amarulasolutions.com, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 15/23] drm/sun4i: sun6i_mipi_dsi: Add has_mod_clk quirk
Date: Fri,  1 Feb 2019 21:12:24 +0530	[thread overview]
Message-ID: <20190201154232.10505-16-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190201154232.10505-1-jagan@amarulasolutions.com>

As per the user manual, look like mod clock is not mandatory
for all Allwinner MIPI DSI controllers, it is connected to
CLK_DSI_SCLK for A31 and not available in A64.

So add has_mod_clk quirk and process the clk accordingly.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 38 ++++++++++++++++++--------
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h |  5 ++++
 2 files changed, 32 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 9be414131460..de7d9dcb049f 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -10,6 +10,7 @@
 #include <linux/component.h>
 #include <linux/crc-ccitt.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
@@ -1099,6 +1100,7 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
 	dsi->dev = dev;
 	dsi->host.ops = &sun6i_dsi_host_ops;
 	dsi->host.dev = dev;
+	dsi->variant = of_device_get_match_data(dev);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(dev, res);
@@ -1126,17 +1128,20 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
 		return PTR_ERR(dsi->reset);
 	}
 
-	dsi->mod_clk = devm_clk_get(dev, "mod");
-	if (IS_ERR(dsi->mod_clk)) {
-		dev_err(dev, "Couldn't get the DSI mod clock\n");
-		return PTR_ERR(dsi->mod_clk);
+	if (dsi->variant->has_mod_clk) {
+		dsi->mod_clk = devm_clk_get(dev, "mod");
+		if (IS_ERR(dsi->mod_clk)) {
+			dev_err(dev, "Couldn't get the DSI mod clock\n");
+			return PTR_ERR(dsi->mod_clk);
+		}
 	}
 
 	/*
 	 * In order to operate properly, that clock seems to be always
 	 * set to 297MHz.
 	 */
-	clk_set_rate_exclusive(dsi->mod_clk, 297000000);
+	if (dsi->variant->has_mod_clk)
+		clk_set_rate_exclusive(dsi->mod_clk, 297000000);
 
 	dphy_node = of_parse_phandle(dev->of_node, "phys", 0);
 	ret = sun6i_dphy_probe(dsi, dphy_node);
@@ -1168,7 +1173,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 	sun6i_dphy_remove(dsi);
 err_unprotect_clk:
-	clk_rate_exclusive_put(dsi->mod_clk);
+	if (dsi->variant->has_mod_clk)
+		clk_rate_exclusive_put(dsi->mod_clk);
 	return ret;
 }
 
@@ -1181,7 +1187,8 @@ static int sun6i_dsi_remove(struct platform_device *pdev)
 	mipi_dsi_host_unregister(&dsi->host);
 	pm_runtime_disable(dev);
 	sun6i_dphy_remove(dsi);
-	clk_rate_exclusive_put(dsi->mod_clk);
+	if (dsi->variant->has_mod_clk)
+		clk_rate_exclusive_put(dsi->mod_clk);
 
 	return 0;
 }
@@ -1198,7 +1205,8 @@ static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev)
 	}
 
 	reset_control_deassert(dsi->reset);
-	clk_prepare_enable(dsi->mod_clk);
+	if (dsi->variant->has_mod_clk)
+		clk_prepare_enable(dsi->mod_clk);
 
 	/*
 	 * Enable the DSI block.
@@ -1226,7 +1234,8 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev)
 {
 	struct sun6i_dsi *dsi = dev_get_drvdata(dev);
 
-	clk_disable_unprepare(dsi->mod_clk);
+	if (dsi->variant->has_mod_clk)
+		clk_disable_unprepare(dsi->mod_clk);
 	reset_control_assert(dsi->reset);
 	regulator_disable(dsi->regulator);
 
@@ -1239,9 +1248,16 @@ static const struct dev_pm_ops sun6i_dsi_pm_ops = {
 			   NULL)
 };
 
+static const struct sun6i_dsi_variant sun6i_a31_mipi_dsi = {
+	.has_mod_clk = true,
+};
+
 static const struct of_device_id sun6i_dsi_of_table[] = {
-	{ .compatible = "allwinner,sun6i-a31-mipi-dsi" },
-	{ }
+	{
+		.compatible = "allwinner,sun6i-a31-mipi-dsi",
+		.data = &sun6i_a31_mipi_dsi,
+	},
+	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table);
 
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
index 06cce0d0d3ad..3c532e83958d 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
@@ -22,6 +22,10 @@ struct sun6i_dphy {
 	struct reset_control	*reset;
 };
 
+struct sun6i_dsi_variant {
+	bool			has_mod_clk;
+};
+
 struct sun6i_dsi {
 	struct drm_connector	connector;
 	struct drm_encoder	encoder;
@@ -39,6 +43,7 @@ struct sun6i_dsi {
 	struct sun4i_tcon	*tcon;
 	struct mipi_dsi_device	*device;
 	struct drm_panel	*panel;
+	const struct sun6i_dsi_variant	*variant;
 };
 
 static inline struct sun6i_dsi *host_to_sun6i_dsi(struct mipi_dsi_host *host)
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-02-01 15:47 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-01 15:42 [PATCH v7 00/23] drm/sun4i: Allwinner A64 MIPI-DSI support Jagan Teki
2019-02-01 15:42 ` [PATCH v7 01/23] drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction delay Jagan Teki
2019-02-01 15:42 ` [PATCH v7 02/23] drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection Jagan Teki
2019-02-01 15:42 ` [PATCH v7 03/23] drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings Jagan Teki
2019-02-01 15:42 ` [PATCH v7 04/23] drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes Jagan Teki
2019-02-01 15:42 ` [PATCH v7 05/23] drm/sun4i: tcon: Export get tcon0 routine Jagan Teki
2019-02-01 15:42 ` [PATCH v7 06/23] drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind Jagan Teki
2019-02-01 15:42 ` [PATCH v7 07/23] drm/sun4i: sun6i_mipi_dsi: Setup burst mode Jagan Teki
2019-02-01 15:42 ` [PATCH v7 08/23] drm/sun4i: sun6i_mipi_dsi: Enable trail_inv and trail_fill controls Jagan Teki
2019-02-01 15:42 ` [PATCH v7 09/23] drm/sun4i: sun6i_mipi_dsi: Enable HBP, HSA_HSE for burst mode Jagan Teki
2019-02-01 15:42 ` [PATCH v7 10/23] drm/sun4i: tcon: Compute DCLK dividers based on format, lanes Jagan Teki
2019-02-01 15:42 ` [PATCH v7 11/23] dt-bindings: sun6i-dsi: Add VCC-DSI supply property Jagan Teki
2019-02-01 15:42 ` [PATCH v7 12/23] drm/sun4i: sun6i_mipi_dsi: Add support for VCC-DSI voltage regulator Jagan Teki
2019-02-01 15:42 ` [PATCH v7 13/23] dt-bindings: sun6i-dsi: Add A64 MIPI-DSI compatible Jagan Teki
2019-02-01 15:42 ` [PATCH v7 14/23] dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback) Jagan Teki
2019-02-01 15:42 ` Jagan Teki [this message]
2019-02-01 15:42 ` [PATCH v7 16/23] drm/sun4i: sun6i_mipi_dsi: Add Allwinner A64 MIPI DSI support Jagan Teki
2019-02-01 15:42 ` [PATCH v7 17/23] arm64: dts: allwinner: a64: Add MIPI DSI pipeline Jagan Teki
2019-02-01 15:42 ` [DO NOT MERGE][PATCH v7 18/23] arm64: allwinner: a64: pine64-lts: Enable Feiyang FY07024DI26A30-D DSI panel Jagan Teki
2019-02-01 15:42 ` [PATCH v7 19/23] drm/sun4i: sun6i_mipi_dsi: Add DSI Generic short write 2 param transfer Jagan Teki
2019-02-01 15:42 ` [DO NOT MERGE][PATCH v7 20/23] arm64: dts: allwinner: bananapi-m64: Bananapi S070WV20-CT16 DSI panel Jagan Teki
2019-02-01 15:42 ` [PATCH v7 21/23] drm/sun4i: sun6i_mipi_dsi: Fix DSI hbp timing value Jagan Teki
2019-02-01 15:42 ` [PATCH v7 22/23] drm/sun4i: sun6i_mipi_dsi: Fix DSI hfp " Jagan Teki
2019-02-01 15:42 ` [PATCH v7 23/23] arm64: dts: allwinner: a64-amarula-relic: Add Techstar TS8550B MIPI-DSI panel Jagan Teki
2019-02-01 15:48 ` [PATCH v7 00/23] drm/sun4i: Allwinner A64 MIPI-DSI support Maxime Ripard
2019-02-01 15:51   ` Jagan Teki
2019-02-12  9:46 ` Jagan Teki
2019-02-13  9:03   ` Maxime Ripard
2019-02-13  9:19     ` Jagan Teki
2019-02-14 16:41       ` Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190201154232.10505-16-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-amarula@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=michael@amarulasolutions.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).