From: Linus Walleij <linus.walleij@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
Imre Kaloz <kaloz@openwrt.org>,
Krzysztof Halasa <khalasa@piap.pl>
Cc: Olof Johansson <olof@lixom.net>,
Tim Harvey <tharvey@gateworks.com>,
Linus Walleij <linus.walleij@linaro.org>,
Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH 03/17 v1] ARM: ixp4xx: Convert to SPARSE_IRQ
Date: Sun, 3 Feb 2019 22:41:51 +0100 [thread overview]
Message-ID: <20190203214205.13594-4-linus.walleij@linaro.org> (raw)
In-Reply-To: <20190203214205.13594-1-linus.walleij@linaro.org>
This localizes the <mach/irqs.h> header to the mach-ixp4xx
directory, removes NR_IRQS and switches IXP4xx over to using
SPARSE_IRQ.
This is a prerequisite for DT support.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-ixp4xx/avila-pci.c | 2 ++
arch/arm/mach-ixp4xx/avila-setup.c | 2 ++
arch/arm/mach-ixp4xx/common.c | 2 ++
arch/arm/mach-ixp4xx/coyote-pci.c | 2 ++
arch/arm/mach-ixp4xx/coyote-setup.c | 2 ++
arch/arm/mach-ixp4xx/dsmg600-pci.c | 2 ++
arch/arm/mach-ixp4xx/dsmg600-setup.c | 2 ++
arch/arm/mach-ixp4xx/fsg-pci.c | 2 ++
arch/arm/mach-ixp4xx/fsg-setup.c | 2 ++
arch/arm/mach-ixp4xx/gateway7001-pci.c | 2 ++
arch/arm/mach-ixp4xx/gateway7001-setup.c | 2 ++
arch/arm/mach-ixp4xx/gtwx5715-pci.c | 2 ++
arch/arm/mach-ixp4xx/gtwx5715-setup.c | 2 ++
arch/arm/mach-ixp4xx/{include/mach => }/irqs.h | 2 --
arch/arm/mach-ixp4xx/ixdp425-pci.c | 2 ++
arch/arm/mach-ixp4xx/ixdp425-setup.c | 2 ++
arch/arm/mach-ixp4xx/ixdpg425-pci.c | 2 ++
arch/arm/mach-ixp4xx/ixp4xx_qmgr.c | 2 ++
arch/arm/mach-ixp4xx/nas100d-pci.c | 2 ++
arch/arm/mach-ixp4xx/nas100d-setup.c | 2 ++
arch/arm/mach-ixp4xx/nslu2-pci.c | 2 ++
arch/arm/mach-ixp4xx/nslu2-setup.c | 2 ++
arch/arm/mach-ixp4xx/wg302v2-pci.c | 2 ++
arch/arm/mach-ixp4xx/wg302v2-setup.c | 2 ++
25 files changed, 47 insertions(+), 2 deletions(-)
rename arch/arm/mach-ixp4xx/{include/mach => }/irqs.h (99%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0bdcacd40591..de2a5647e85d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -435,6 +435,7 @@ config ARCH_IXP4XX
select GPIOLIB
select HAVE_PCI
select NEED_MACH_IO_H
+ select SPARSE_IRQ
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
help
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 548c7d43ade6..9c834f0f4231 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -27,6 +27,8 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
+#include "irqs.h"
+
#define AVILA_MAX_DEV 4
#define LOFT_MAX_DEV 6
#define IRQ_LINES 4
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 44cbbce6bda6..1981b33109cb 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -28,6 +28,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include "irqs.h"
+
#define AVILA_SDA_PIN 7
#define AVILA_SCL_PIN 6
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 58a1b851425e..aa8fd248c125 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -45,6 +45,8 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include "irqs.h"
+
#define IXP4XX_TIMER_FREQ 66666000
/*
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 5d14ce2aee6d..a16c35d2bb96 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -23,6 +23,8 @@
#include <asm/irq.h>
#include <asm/mach/pci.h>
+#include "irqs.h"
+
#define SLOT0_DEVID 14
#define SLOT1_DEVID 15
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 7e40fe70933b..7ca43ca2816d 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -25,6 +25,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include "irqs.h"
+
#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3)
#define COYOTE_IDE_BASE_VIRT 0xFFFE1000
#define COYOTE_IDE_REGION_SIZE 0x1000
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index 8dca76937723..6899023bd1b7 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -22,6 +22,8 @@
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
+#include "irqs.h"
+
#define MAX_DEV 4
#define IRQ_LINES 3
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 397190f3a8da..0daaede8fb6d 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -35,6 +35,8 @@
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
+#include "irqs.h"
+
#define DSMG600_SDA_PIN 5
#define DSMG600_SCL_PIN 4
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index fd4a8625b4ae..6c08bb9d9807 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -22,6 +22,8 @@
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
+#include "irqs.h"
+
#define MAX_DEV 3
#define IRQ_LINES 3
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index f0a152e365b1..648932d8d7a8 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -29,6 +29,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include "irqs.h"
+
#define FSG_SDA_PIN 12
#define FSG_SCL_PIN 13
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index d9d6cc089707..903c75330b76 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -27,6 +27,8 @@
#include <asm/mach/pci.h>
+#include "irqs.h"
+
void __init gateway7001_pci_preinit(void)
{
irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 1be6faf6da9a..678e7dfff0e5 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -28,6 +28,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include "irqs.h"
+
static struct flash_platform_data gateway7001_flash_data = {
.map_name = "cfi_probe",
.width = 2,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 551d114c9e14..1223d160448f 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -30,6 +30,8 @@
#include <mach/hardware.h>
#include <asm/mach/pci.h>
+#include "irqs.h"
+
#define SLOT0_DEVID 0
#define SLOT1_DEVID 1
#define INTA 10 /* slot 1 has INTA and INTB crossed */
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 16a12994fb53..5dbdde8e2338 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -36,6 +36,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include "irqs.h"
+
/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
and operate as an SPI type interface. The details of the interface
are available on Kendin/Micrel's web site. */
diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/irqs.h
similarity index 99%
rename from arch/arm/mach-ixp4xx/include/mach/irqs.h
rename to arch/arm/mach-ixp4xx/irqs.h
index dadcd4ddb0a9..6b7f220cf9e0 100644
--- a/arch/arm/mach-ixp4xx/include/mach/irqs.h
+++ b/arch/arm/mach-ixp4xx/irqs.h
@@ -63,8 +63,6 @@
#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n)
#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n)
-#define NR_IRQS 512
-
#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU)
#endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 318424dd3c50..c1340465b2ea 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -24,6 +24,8 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
+#include "irqs.h"
+
#define MAX_DEV 4
#define IRQ_LINES 4
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 57d7df79d838..6f0f7ed18ea8 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -32,6 +32,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include "irqs.h"
+
#define IXDP425_SDA_PIN 7
#define IXDP425_SCL_PIN 6
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index 1f8717ba13dc..ac0e9bc6eb4d 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -23,6 +23,8 @@
#include <asm/mach/pci.h>
+#include "irqs.h"
+
void __init ixdpg425_pci_preinit(void)
{
irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index 9d1b6b7c394c..4c7c960e1b4c 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -14,6 +14,8 @@
#include <linux/module.h>
#include <mach/qmgr.h>
+#include "irqs.h"
+
static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
static struct resource *mem_res;
static spinlock_t qmgr_lock;
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
index 8f0eba0a6800..925ef805f966 100644
--- a/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -21,6 +21,8 @@
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
+#include "irqs.h"
+
#define MAX_DEV 3
#define IRQ_LINES 3
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 4138d6aa4c52..9d67f8de0772 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -34,6 +34,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include "irqs.h"
+
#define NAS100D_SDA_PIN 5
#define NAS100D_SCL_PIN 6
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index 032defe111aa..d69ee4066d20 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -21,6 +21,8 @@
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
+#include "irqs.h"
+
#define MAX_DEV 3
#define IRQ_LINES 3
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 7c2b6604187e..ee1877fcfafe 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -32,6 +32,8 @@
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
+#include "irqs.h"
+
#define NSLU2_SDA_PIN 7
#define NSLU2_SCL_PIN 6
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index c92e5b82af36..cf83f7e24179 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -27,6 +27,8 @@
#include <asm/mach/pci.h>
+#include "irqs.h"
+
void __init wg302v2_pci_preinit(void)
{
irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 90b3c604e8b6..8711e299229b 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -29,6 +29,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include "irqs.h"
+
static struct flash_platform_data wg302v2_flash_data = {
.map_name = "cfi_probe",
.width = 2,
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-02-03 21:43 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-03 21:41 [PATCH 00/17 v1] ARM: ixp4xx: Modernize and DT support Linus Walleij
2019-02-03 21:41 ` [PATCH 01/17 v1] ARM: ixp4xx: Convert to MULTI_IRQ_HANDLER Linus Walleij
2019-02-03 21:41 ` [PATCH 02/17 v1] ARM: ixp4xx: Pass IRQ resource to beeper Linus Walleij
2019-02-03 21:41 ` Linus Walleij [this message]
2019-02-03 21:41 ` [PATCH 04/17 v1] irqchip: Add driver for IXP4xx Linus Walleij
2019-02-11 15:30 ` Marc Zyngier
2019-02-11 20:58 ` Linus Walleij
2019-02-11 22:11 ` Marc Zyngier
2019-02-18 7:06 ` Krzysztof Hałasa
2019-02-18 7:16 ` Linus Walleij
2019-02-18 7:35 ` Krzysztof Hałasa
2019-02-18 9:40 ` Arnd Bergmann
2019-02-18 12:03 ` Krzysztof Hałasa
2019-02-18 12:44 ` Arnd Bergmann
2019-02-19 6:51 ` Krzysztof Hałasa
2019-02-19 9:46 ` Arnd Bergmann
2019-02-20 7:35 ` Krzysztof Hałasa
2019-02-18 9:18 ` Arnd Bergmann
2019-02-03 21:41 ` [PATCH 05/17 v1] gpio: ixp4xx: Add driver for the IXP4xx GPIO Linus Walleij
2019-02-06 16:03 ` Bartosz Golaszewski
2019-02-21 8:50 ` Linus Walleij
2019-02-03 21:41 ` [PATCH 06/17 v1] ARM: ixp4xx: Switch to use new IRQ+GPIO drivers Linus Walleij
2019-02-03 21:41 ` [PATCH 07/17 v1] clocksource/drivers/ixp4xx: Add driver Linus Walleij
2019-02-03 21:41 ` [PATCH 08/17 v1] ARM: ixp4xx: Switch to use new timer driver Linus Walleij
2019-02-03 21:41 ` [PATCH 09/17 v1] irqchip: ixp4xx: Add DT bindings Linus Walleij
2019-02-18 21:25 ` Rob Herring
2019-02-03 21:41 ` [PATCH 10/17 v1] irqchip: ixp4xx: Add OF initialization support Linus Walleij
2019-02-03 21:41 ` [PATCH 11/17 v1] clocksource/drivers/ixp4xx: Add DT bindings Linus Walleij
2019-02-18 21:26 ` Rob Herring
2019-02-18 22:10 ` Daniel Lezcano
2019-02-03 21:42 ` [PATCH 12/17 v1] clocksource/drivers/ixp4xx: Add OF initialization support Linus Walleij
2019-02-11 11:26 ` Daniel Lezcano
2019-02-03 21:42 ` [PATCH 13/17 v1] gpio: ixp4xx: Add DT bindings Linus Walleij
2019-02-06 16:05 ` Bartosz Golaszewski
2019-02-18 21:27 ` Rob Herring
2019-02-03 21:42 ` [PATCH 14/17 v1] gpio: ixp4xx: Add OF probing support Linus Walleij
2019-02-06 16:13 ` Bartosz Golaszewski
2019-02-21 8:55 ` Linus Walleij
2019-02-03 21:42 ` [PATCH 15/17 v1] ARM: ixp4xx: Add DT bindings Linus Walleij
2019-02-04 15:16 ` Rob Herring
2019-02-08 19:37 ` Linus Walleij
2019-02-03 21:42 ` [PATCH 16/17 v1] ARM: ixp4xx: Add device tree boot support Linus Walleij
2019-02-03 21:42 ` [PATCH 17/17 v1] RFC: ARM: dts: Add some initial IXP4xx device trees Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190203214205.13594-4-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=arnd@arndb.de \
--cc=kaloz@openwrt.org \
--cc=khalasa@piap.pl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=olof@lixom.net \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).