linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
	Dave Gerlach <d-gerlach@ti.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-kernel@vger.kernel.org,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Faiz Abbas <faiz_abbas@ti.com>, Keerthy <j-keerthy@ti.com>,
	linux-arm-kernel@lists.infradead.org,
	Roger Quadros <rogerq@ti.com>
Subject: [PATCH 13/14] bus: ti-sysc: Handle swsup idle mode quirks
Date: Mon, 25 Mar 2019 14:58:48 -0700	[thread overview]
Message-ID: <20190325215849.13182-14-tony@atomide.com> (raw)
In-Reply-To: <20190325215849.13182-1-tony@atomide.com>

In preparation of dropping interconnect target module platform data in
favor of devicetree based data, we must pass swsup idle quirks to the
platform data functions.

For now, let's only tag the UART modules with the SWSUP_SIDLE_ACT quirk.
The other modules will get tagged with swsup quirks as we drop the
platform data and test the changes.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod.c      | 6 ++++++
 drivers/bus/ti-sysc.c                 | 6 +++---
 include/linux/platform_data/ti-sysc.h | 3 +++
 3 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3683,6 +3683,12 @@ int omap_hwmod_init_module(struct device *dev,
 		oh->flags |= HWMOD_INIT_NO_RESET;
 	if (data->cfg->quirks & SYSC_QUIRK_USE_CLOCKACT)
 		oh->flags |= HWMOD_SET_DEFAULT_CLOCKACT;
+	if (data->cfg->quirks & SYSC_QUIRK_SWSUP_SIDLE)
+		oh->flags |= HWMOD_SWSUP_SIDLE;
+	if (data->cfg->quirks & SYSC_QUIRK_SWSUP_SIDLE_ACT)
+		oh->flags |= HWMOD_SWSUP_SIDLE_ACT;
+	if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY)
+		oh->flags |= HWMOD_SWSUP_MSTANDBY;
 
 	error = omap_hwmod_check_module(dev, oh, data, sysc_fields,
 					rev_offs, sysc_offs, syss_offs,
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -978,12 +978,12 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("timer", 0, 0, 0x10, -1, 0x4fff1301, 0xffff00ff,
 		   0),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 	/* Uarts on omap4 and later */
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
-		   SYSC_QUIRK_LEGACY_IDLE),
+		   SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
 
 	/* Quirks that need to be set based on the module address */
 	SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -1, 0x50000800, 0xffffffff,
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -46,6 +46,9 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_SWSUP_MSTANDBY	BIT(13)
+#define SYSC_QUIRK_SWSUP_SIDLE_ACT	BIT(12)
+#define SYSC_QUIRK_SWSUP_SIDLE		BIT(11)
 #define SYSC_QUIRK_EXT_OPT_CLOCK	BIT(10)
 #define SYSC_QUIRK_LEGACY_IDLE		BIT(9)
 #define SYSC_QUIRK_RESET_STATUS		BIT(8)
-- 
2.21.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-03-25 22:31 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-25 21:58 [PATCH 00/14] ti-sysc changes to probe devices with dts data only Tony Lindgren
2019-03-25 21:58 ` [PATCH 01/14] bus: ti-sysc: Fix sysc_unprepare() when no clocks have been allocated Tony Lindgren
2019-03-25 21:58 ` [PATCH 02/14] bus: ti-sysc: Handle missed no-idle property in addition to no-idle-on-init Tony Lindgren
2019-03-31  6:41   ` Rob Herring
2019-03-25 21:58 ` [PATCH 03/14] bus: ti-sysc: Make functions static Tony Lindgren
2019-03-25 21:58 ` [PATCH 04/14] bus: ti-sysc: Move legacy platform data idling into separate functions Tony Lindgren
2019-03-25 21:58 ` [PATCH 05/14] bus: ti-sysc: Add separate functions for handling clocks Tony Lindgren
2019-04-03 18:00   ` Tony Lindgren
2019-03-25 21:58 ` [PATCH 06/14] bus: ti-sysc: Enable all clocks directly during init to read revision Tony Lindgren
2019-03-25 21:58 ` [PATCH 07/14] bus: ti-sysc: Allocate mdata as needed and do platform data based init later Tony Lindgren
2019-03-25 21:58 ` [PATCH 08/14] bus: ti-sysc: Manage clocks for the interconnect target module in all cases Tony Lindgren
2019-03-25 21:58 ` [PATCH 09/14] bus: ti-sysc: Move rstctrl reset to happen later Tony Lindgren
2019-03-26 23:13   ` Tony Lindgren
2019-03-26 23:22     ` Suman Anna
2019-03-26 23:40       ` Tony Lindgren
2019-03-27 16:27         ` Suman Anna
2019-03-27 18:37           ` Tony Lindgren
2019-03-25 21:58 ` [PATCH 10/14] bus: ti-sysc: Add support for early quirks based on register address Tony Lindgren
2019-03-25 21:58 ` [PATCH 11/14] bus: ti-sysc: Add quirk handling for external optional functional clock Tony Lindgren
2019-04-08 16:51   ` Tony Lindgren
2019-03-25 21:58 ` [PATCH 12/14] bus: ti-sysc: Pass clockactivity quirk to platform functions Tony Lindgren
2019-03-25 21:58 ` Tony Lindgren [this message]
2019-03-25 21:58 ` [PATCH 14/14] bus: ti-sysc: Detect DMIC for debugging Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190325215849.13182-14-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=d-gerlach@ti.com \
    --cc=faiz_abbas@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=rogerq@ti.com \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).