From: Jeremy Linton <jeremy.linton@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: mark.rutland@arm.com, lorenzo.pieralisi@arm.com,
will.deacon@arm.com, sudeep.holla@arm.com, rjw@rjwysocki.net,
linux-kernel@vger.kernel.org,
Jeremy Linton <jeremy.linton@arm.com>,
linuxarm@huawei.com, linux-acpi@vger.kernel.org,
james.morse@arm.com, catalin.marinas@arm.com, lenb@kernel.org
Subject: [PATCH 3/4] arm_pmu: acpi: spe: Add initial MADT/SPE probing
Date: Tue, 26 Mar 2019 17:39:37 -0500 [thread overview]
Message-ID: <20190326223938.5365-4-jeremy.linton@arm.com> (raw)
In-Reply-To: <20190326223938.5365-1-jeremy.linton@arm.com>
ACPI 6.3 adds additional fields to the MADT GICC
structure to describe SPE PPI's. We pick these out
of the cached reference to the madt_gicc structure
similarly to the core PMU code. We then create a platform
device referring to the IRQ and let the user/module loader
decide whether to load the SPE driver.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
arch/arm64/include/asm/acpi.h | 3 ++
drivers/perf/arm_pmu_acpi.c | 69 +++++++++++++++++++++++++++++++++++
2 files changed, 72 insertions(+)
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index 7628efbe6c12..d10399b9f998 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -41,6 +41,9 @@
(!(entry) || (entry)->header.length < ACPI_MADT_GICC_MIN_LENGTH || \
(unsigned long)(entry) + (entry)->header.length > (end))
+#define ACPI_MADT_GICC_SPE (ACPI_OFFSET(struct acpi_madt_generic_interrupt, \
+ spe_interrupt) + sizeof(u16))
+
/* Basic configuration for ACPI */
#ifdef CONFIG_ACPI
pgprot_t __acpi_get_mem_attribute(phys_addr_t addr);
diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
index 0f197516d708..a2418108eab2 100644
--- a/drivers/perf/arm_pmu_acpi.c
+++ b/drivers/perf/arm_pmu_acpi.c
@@ -74,6 +74,73 @@ static void arm_pmu_acpi_unregister_irq(int cpu)
acpi_unregister_gsi(gsi);
}
+static struct resource spe_resources[] = {
+ {
+ /* irq */
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device spe_dev = {
+ .name = "arm,spe-v1",
+ .id = -1,
+ .resource = spe_resources,
+ .num_resources = ARRAY_SIZE(spe_resources)
+};
+
+/*
+ * For lack of a better place, hook the normal PMU MADT walk
+ * and create a SPE device if we detect a recent MADT with
+ * a homogeneous PPI mapping.
+ */
+static int arm_spe_acpi_parse_irqs(void)
+{
+ int cpu, ret, irq;
+ int hetid;
+ u16 gsi = 0;
+ bool first = true;
+
+ struct acpi_madt_generic_interrupt *gicc;
+
+ /*
+ * sanity check all the GICC tables for the same interrupt number
+ * for now we only support homogeneous ACPI/SPE machines.
+ */
+ for_each_possible_cpu(cpu) {
+ gicc = acpi_cpu_get_madt_gicc(cpu);
+
+ if (gicc->header.length < ACPI_MADT_GICC_SPE)
+ return -ENODEV;
+ if (first) {
+ gsi = gicc->spe_interrupt;
+ if (!gsi)
+ return -ENODEV;
+ hetid = find_acpi_cpu_topology_hetero_id(cpu);
+ first = false;
+ } else if ((gsi != gicc->spe_interrupt) ||
+ (hetid != find_acpi_cpu_topology_hetero_id(cpu))) {
+ pr_warn("ACPI: SPE must be homogeneous\n");
+ return -EINVAL;
+ }
+ }
+
+ irq = acpi_register_gsi(NULL, gsi, ACPI_LEVEL_SENSITIVE,
+ ACPI_ACTIVE_HIGH);
+ if (irq < 0) {
+ pr_warn("ACPI: SPE Unable to register interrupt: %d\n", gsi);
+ return irq;
+ }
+
+ spe_resources[0].start = irq;
+ ret = platform_device_register(&spe_dev);
+ if (ret < 0) {
+ pr_warn("ACPI: SPE: Unable to register device\n");
+ acpi_unregister_gsi(gsi);
+ }
+
+ return ret;
+}
+
static int arm_pmu_acpi_parse_irqs(void)
{
int irq, cpu, irq_cpu, err;
@@ -279,6 +346,8 @@ static int arm_pmu_acpi_init(void)
if (acpi_disabled)
return 0;
+ arm_spe_acpi_parse_irqs(); /* failures are expected */
+
ret = arm_pmu_acpi_parse_irqs();
if (ret)
return ret;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-26 22:40 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-26 22:39 [PATCH 0/4] arm64: SPE ACPI enablement Jeremy Linton
2019-03-26 22:39 ` [PATCH 1/4] ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens Jeremy Linton
2019-03-28 10:04 ` Rafael J. Wysocki
2019-03-28 15:20 ` Jeremy Linton
2019-03-26 22:39 ` [PATCH 2/4] ACPI/PPTT: Modify node flag detection to find last IDENTICAL Jeremy Linton
2019-03-26 22:39 ` Jeremy Linton [this message]
2019-03-28 12:40 ` [PATCH 3/4] arm_pmu: acpi: spe: Add initial MADT/SPE probing John Garry
2019-04-02 19:14 ` Jeremy Linton
2019-04-05 9:23 ` John Garry
2019-03-26 22:39 ` [PATCH 4/4] perf: arm_spe: Enable ACPI/Platform automatic module loading Jeremy Linton
2019-04-04 17:04 ` Will Deacon
2019-04-04 17:24 ` Jeremy Linton
2019-04-16 13:50 ` Will Deacon
2019-04-26 0:58 ` Jeremy Linton
2019-04-26 8:04 ` Will Deacon
2019-06-15 1:09 [PATCH v4 0/4] arm64: SPE ACPI enablement Jeremy Linton
2019-06-15 1:09 ` [PATCH 3/4] arm_pmu: acpi: spe: Add initial MADT/SPE probing Jeremy Linton
2019-06-18 17:05 ` Sudeep Holla
2019-06-18 17:36 ` Lorenzo Pieralisi
2019-06-18 18:37 ` Jeremy Linton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190326223938.5365-4-jeremy.linton@arm.com \
--to=jeremy.linton@arm.com \
--cc=catalin.marinas@arm.com \
--cc=james.morse@arm.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=rjw@rjwysocki.net \
--cc=sudeep.holla@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).