[PATCH] PCI: armada8k: Add PHYs support

[Miquel Raynal <miquel.raynal@bootlin.com>]

Bring PHY support for the Armada8k driver.

The Armada8k IP only supports x1, x2 or x4 link widths. Iterate over
the DT 'phys' entries and configure them one by one. Use
phy_set_mode_ext() to make use of the submode parameter (initially
introduced for Ethernet modes). For PCI configuration, let the submode
be the width (1, 2, 4, etc) so that the PHY driver knows how many
lanes are bundled. Do not error out in case of error for compatibility
reasons.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/pci/controller/dwc/pcie-armada8k.c | 82 +++++++++++++++++++++-
 1 file changed, 81 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c
index 0c389a30ef5d..e567a7cfa3d7 100644
--- a/drivers/pci/controller/dwc/pcie-armada8k.c
+++ b/drivers/pci/controller/dwc/pcie-armada8k.c
@@ -25,10 +25,14 @@
 
 #include "pcie-designware.h"
 
+#define ARMADA8K_PCIE_MAX_LANES PCIE_LNK_X4
+
 struct armada8k_pcie {
 	struct dw_pcie *pci;
 	struct clk *clk;
 	struct clk *clk_reg;
+	struct phy *phy[ARMADA8K_PCIE_MAX_LANES];
+	unsigned int phy_count;
 };
 
 #define PCIE_VENDOR_REGS_OFFSET		0x8000
@@ -67,6 +71,76 @@ struct armada8k_pcie {
 
 #define to_armada8k_pcie(x)	dev_get_drvdata((x)->dev)
 
+static void armada8k_pcie_disable_phys(struct armada8k_pcie *pcie)
+{
+	int i;
+
+	for (i = 0; i < ARMADA8K_PCIE_MAX_LANES; i++) {
+		phy_power_off(pcie->phy[i]);
+		phy_exit(pcie->phy[i]);
+	}
+}
+
+static int armada8k_pcie_enable_phys(struct armada8k_pcie *pcie)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < ARMADA8K_PCIE_MAX_LANES; i++) {
+		ret = phy_init(pcie->phy[i]);
+		if (ret)
+			return ret;
+
+		ret = phy_set_mode_ext(pcie->phy[i], PHY_MODE_PCIE,
+				       pcie->phy_count);
+		if (ret) {
+			phy_exit(pcie->phy[i]);
+			return ret;
+		}
+
+		ret = phy_power_on(pcie->phy[i]);
+		if (ret) {
+			phy_exit(pcie->phy[i]);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int armada8k_pcie_setup_phys(struct armada8k_pcie *pcie)
+{
+	struct dw_pcie *pci = pcie->pci;
+	struct device *dev = pci->dev;
+	struct device_node *node = dev->of_node;
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < ARMADA8K_PCIE_MAX_LANES; i++) {
+		pcie->phy[i] = devm_of_phy_get_by_index(dev, node, i);
+		if (IS_ERR(pcie->phy[i]) &&
+		    (PTR_ERR(pcie->phy[i]) == -EPROBE_DEFER))
+			return PTR_ERR(pcie->phy[i]);
+
+		if (IS_ERR(pcie->phy[i])) {
+			pcie->phy[i] = NULL;
+			continue;
+		}
+
+		pcie->phy_count++;
+	}
+
+	/* Old bindings miss the PHY handle, so just warn if there is no PHY */
+	if (!pcie->phy_count)
+		dev_warn(dev, "No available PHY\n");
+
+	ret = armada8k_pcie_enable_phys(pcie);
+	if (ret)
+		dev_err(dev, "Failed to initialize PHY(s) (%d)\n", ret);
+
+	return ret;
+}
+
 static int armada8k_pcie_link_up(struct dw_pcie *pci)
 {
 	u32 reg;
@@ -249,14 +323,20 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
 		goto fail_clkreg;
 	}
 
+	ret = armada8k_pcie_setup_phys(pcie);
+	if (ret)
+		goto fail_clkreg;
+
 	platform_set_drvdata(pdev, pcie);
 
 	ret = armada8k_add_pcie_port(pcie, pdev);
 	if (ret)
-		goto fail_clkreg;
+		goto disable_phy;
 
 	return 0;
 
+disable_phy:
+	armada8k_pcie_disable_phys(pcie);
 fail_clkreg:
 	clk_disable_unprepare(pcie->clk_reg);
 fail:
-- 
2.19.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel