[PATCH 0/3] Add mclk0 clock source for SAI

[Daniel Baluta <daniel.baluta@nxp.com>]

This patch series brings together patches [1] and [2] which
introduce mclk0 clock source via DT.

mclk0..3 are the four clock sources options
of SAI's clock MUX. 

mclk0 option selects:
 - Bus Clock on i.MX8
 - MCLK1 on i.MX6/7

Finally we also update the DT binding information for SAI clocks.

In [1] and [2] Nicolin had a very good point on the fact that
mclk0 might not be needed in the DT. Anyhow, there are two reasons
for which I think mlck0 should be added to DT:

1) SAI clock source select MUX is really part of the hardware
2) flexibility! We let DT tell us which is the option for MUX
option 0.


[1] lkml.org/lkml/2019/4/20/141
[2] lkml.org/lkml/2019/4/20/56

Daniel Baluta (2):
  dt-bindings: sound: Clarify the usage of clocks in SAI
  ASoC: fsl_sai: Read SAI clock source 0 from DT

Shengjiu Wang (1):
  ARM: dts: imx: Add mclk0 clock for SAI

 Documentation/devicetree/bindings/sound/fsl-sai.txt | 5 +++--
 arch/arm/boot/dts/imx6sx.dtsi                       | 6 ++++--
 arch/arm/boot/dts/imx6ul.dtsi                       | 9 ++++++---
 arch/arm/boot/dts/imx7s.dtsi                        | 9 ++++++---
 sound/soc/fsl/fsl_sai.c                             | 3 +--
 5 files changed, 20 insertions(+), 12 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel