From: Peter Chen <peter.chen@nxp.com>
To: balbi@kernel.org, shawnguo@kernel.org
Cc: aisheng.dong@nxp.com, devicetree@vger.kernel.org,
Peter Chen <peter.chen@nxp.com>,
linux-usb@vger.kernel.org, chunfeng.yun@mediatek.com,
robh+dt@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de,
fabio.estevam@nxp.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 5/8] usb: chipidea: imx: add imx7ulp support
Date: Fri, 14 Jun 2019 17:35:41 +0800 [thread overview]
Message-ID: <20190614093544.11730-6-peter.chen@nxp.com> (raw)
In-Reply-To: <20190614093544.11730-1-peter.chen@nxp.com>
In this commit, we add CI_HDRC_PMQOS to avoid system entering idle,
at imx7ulp, if the system enters idle, the DMA will stop, so the USB
transfer can't work at this case.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 28 +++++++++++++++++++++++++++-
drivers/usb/chipidea/usbmisc_imx.c | 4 ++++
include/linux/usb/chipidea.h | 1 +
3 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index ceec8d5985d4..a76708501236 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -13,6 +13,7 @@
#include <linux/usb/of.h>
#include <linux/clk.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/pm_qos.h>
#include "ci.h"
#include "ci_hdrc_imx.h"
@@ -63,6 +64,11 @@ static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = {
.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
};
+static const struct ci_hdrc_imx_platform_flag imx7ulp_usb_data = {
+ .flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+ CI_HDRC_PMQOS,
+};
+
static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
{ .compatible = "fsl,imx23-usb", .data = &imx23_usb_data},
{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
@@ -72,6 +78,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
{ .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data},
{ .compatible = "fsl,imx6ul-usb", .data = &imx6ul_usb_data},
{ .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data},
+ { .compatible = "fsl,imx7ulp-usb", .data = &imx7ulp_usb_data},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
@@ -93,6 +100,8 @@ struct ci_hdrc_imx_data {
struct clk *clk_ahb;
struct clk *clk_per;
/* --------------------------------- */
+ struct pm_qos_request pm_qos_req;
+ const struct ci_hdrc_imx_platform_flag *plat_data;
};
/* Common functions shared by usbmisc drivers */
@@ -309,6 +318,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
if (!data)
return -ENOMEM;
+ data->plat_data = imx_platform_flag;
+ pdata.flags |= imx_platform_flag->flags;
platform_set_drvdata(pdev, data);
data->usbmisc_data = usbmisc_get_init_data(dev);
if (IS_ERR(data->usbmisc_data))
@@ -369,6 +380,11 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
}
}
}
+
+ if (pdata.flags & CI_HDRC_PMQOS)
+ pm_qos_add_request(&data->pm_qos_req,
+ PM_QOS_CPU_DMA_LATENCY, 0);
+
ret = imx_get_clks(dev);
if (ret)
goto disable_hsic_regulator;
@@ -396,7 +412,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
usb_phy_init(pdata.usb_phy);
}
- pdata.flags |= imx_platform_flag->flags;
if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM)
data->supports_runtime_pm = true;
@@ -439,6 +454,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
disable_hsic_regulator:
if (data->hsic_pad_regulator)
ret = regulator_disable(data->hsic_pad_regulator);
+ if (pdata.flags & CI_HDRC_PMQOS)
+ pm_qos_remove_request(&data->pm_qos_req);
return ret;
}
@@ -455,6 +472,8 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
if (data->override_phy_control)
usb_phy_shutdown(data->phy);
imx_disable_unprepare_clks(&pdev->dev);
+ if (data->plat_data->flags & CI_HDRC_PMQOS)
+ pm_qos_remove_request(&data->pm_qos_req);
if (data->hsic_pad_regulator)
regulator_disable(data->hsic_pad_regulator);
@@ -480,6 +499,9 @@ static int __maybe_unused imx_controller_suspend(struct device *dev)
}
imx_disable_unprepare_clks(dev);
+ if (data->plat_data->flags & CI_HDRC_PMQOS)
+ pm_qos_remove_request(&data->pm_qos_req);
+
data->in_lpm = true;
return 0;
@@ -497,6 +519,10 @@ static int __maybe_unused imx_controller_resume(struct device *dev)
return 0;
}
+ if (data->plat_data->flags & CI_HDRC_PMQOS)
+ pm_qos_add_request(&data->pm_qos_req,
+ PM_QOS_CPU_DMA_LATENCY, 0);
+
ret = imx_prepare_enable_clks(dev);
if (ret)
return ret;
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index d8b67e150b12..b7a5727d0c8a 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -763,6 +763,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
.compatible = "fsl,imx7d-usbmisc",
.data = &imx7d_usbmisc_ops,
},
+ {
+ .compatible = "fsl,imx7ulp-usbmisc",
+ .data = &imx7d_usbmisc_ops,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 911e05af671e..edd89b7c8f18 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -61,6 +61,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12) /* Glue layer manages phy */
#define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13)
#define CI_HDRC_IMX_IS_HSIC BIT(14)
+#define CI_HDRC_PMQOS BIT(15)
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
--
2.14.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-06-14 9:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-14 9:35 [PATCH v4 0/8] Add imx7ulp USBOTG1 support Peter Chen
2019-06-14 9:35 ` [PATCH v4 1/8] doc: dt-binding: mxs-usb-phy: add compatible for 7ulp Peter Chen
2019-06-14 9:35 ` [PATCH v4 2/8] usb: phy: phy-mxs-usb: add imx7ulp support Peter Chen
2019-06-14 9:35 ` [PATCH v4 3/8] doc: dt-binding: ci-hdrc-usb2: add compatible string for imx7ulp Peter Chen
2019-06-14 9:35 ` [PATCH v4 4/8] doc: dt-binding: usbmisc-imx: " Peter Chen
2019-06-14 9:35 ` Peter Chen [this message]
2019-06-14 9:35 ` [PATCH v4 6/8] ARM: dts: imx7ulp: add imx7ulp USBOTG1 support Peter Chen
2019-06-15 9:03 ` Sergei Shtylyov
2019-06-17 1:13 ` Peter Chen
2019-06-17 16:05 ` Sergei Shtylyov
2019-06-14 9:35 ` [PATCH v4 7/8] ARM: dts: imx7ulp-evk: enable " Peter Chen
2019-06-14 9:35 ` [PATCH v4 8/8] usb: chipidea: imx: "fsl, usbphy" phandle is not mandatory now Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190614093544.11730-6-peter.chen@nxp.com \
--to=peter.chen@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=balbi@kernel.org \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).