linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Alejandro González" <alejandro.gonzalez.correo@gmail.com>
To: a.zummo@towertech.it, alexandre.belloni@bootlin.com,
	maxime.ripard@bootlin.com, wens@csie.org,
	linux-rtc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: linux-sunxi@googlegroups.com,
	"Alejandro González" <alejandro.gonzalez.correo@gmail.com>
Subject: [RESEND PATCH 1/1] rtc: sun6i: Allow using as wakeup source from suspend
Date: Wed, 21 Aug 2019 23:00:56 +0200	[thread overview]
Message-ID: <20190821210056.11995-1-alejandro.gonzalez.correo@gmail.com> (raw)

This patch allows userspace to set up wakeup alarms on any RTC handled by the
sun6i driver, and adds the necessary PM operations to allow resuming from
suspend when the configured wakeup alarm fires a IRQ. Of course, that the
device actually resumes depends on the suspend state and how a particular
hardware reacts to it, but that is out of scope for this patch.

I've tested these changes on a Pine H64 model B, which contains a
Allwinner H6 SoC, with the help of CONFIG_PM_TEST_SUSPEND kernel option.
These are the interesting outputs from the kernel and commands which
show that it works. As every RTC handled by this driver is largely the
same, I think that it shouldn't introduce any regression on other SoCs,
but I may be wrong.

[    1.092705] PM: test RTC wakeup from 'freeze' suspend
[    1.098230] PM: suspend entry (s2idle)
[    1.212907] PM: suspend devices took 0.080 seconds
(The SoC freezes for some seconds)
[    3.197604] PM: resume devices took 0.104 seconds
[    3.215937] PM: suspend exit

[    1.092812] PM: test RTC wakeup from 'mem' suspend
[    1.098089] PM: suspend entry (deep)
[    1.102033] PM: suspend exit
[    1.105205] PM: suspend test failed, error -22

In any case, the RTC alarm interrupt gets fired as exptected:

$ echo +5 > /sys/class/rtc/rtc0/wakealarm && sleep 5 && grep rtc /proc/interrupts
 29:          1          0          0          0     GICv2 133 Level     7000000.rtc

Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>
---
 drivers/rtc/rtc-sun6i.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
index c0e75c373605..b7611e5dea3f 100644
--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
@@ -598,6 +598,33 @@ static const struct rtc_class_ops sun6i_rtc_ops = {
 	.alarm_irq_enable	= sun6i_rtc_alarm_irq_enable
 };
 
+#ifdef CONFIG_PM_SLEEP
+/* Enable IRQ wake on suspend, to wake up from RTC. */
+static int sun6i_rtc_suspend(struct device *dev)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(chip->irq);
+
+	return 0;
+}
+
+/* Disable IRQ wake on resume. */
+static int sun6i_rtc_resume(struct device *dev)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(chip->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sun6i_rtc_pm_ops,
+	sun6i_rtc_suspend, sun6i_rtc_resume);
+
 static int sun6i_rtc_probe(struct platform_device *pdev)
 {
 	struct sun6i_rtc_dev *chip = sun6i_rtc;
@@ -650,6 +677,8 @@ static int sun6i_rtc_probe(struct platform_device *pdev)
 
 	clk_prepare_enable(chip->losc);
 
+	device_init_wakeup(&pdev->dev, 1);
+
 	chip->rtc = devm_rtc_device_register(&pdev->dev, "rtc-sun6i",
 					     &sun6i_rtc_ops, THIS_MODULE);
 	if (IS_ERR(chip->rtc)) {
@@ -684,6 +713,7 @@ static struct platform_driver sun6i_rtc_driver = {
 	.driver		= {
 		.name		= "sun6i-rtc",
 		.of_match_table = sun6i_rtc_dt_ids,
+		.pm = &sun6i_rtc_pm_ops,
 	},
 };
 builtin_platform_driver(sun6i_rtc_driver);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-08-21 21:01 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21 21:00 Alejandro González [this message]
2019-08-24 10:10 ` [RESEND PATCH 1/1] rtc: sun6i: Allow using as wakeup source from suspend Alejandro González
2019-08-30  9:31 ` Chen-Yu Tsai
2019-09-01  9:02 ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190821210056.11995-1-alejandro.gonzalez.correo@gmail.com \
    --to=alejandro.gonzalez.correo@gmail.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).