From: Rashmica Gupta <rashmica.g@gmail.com>
To: linus.walleij@linaro.org, linux-gpio@vger.kernel.org,
bgolaszewski@baylibre.com
Cc: linux-aspeed@lists.ozlabs.org, andrew@aj.id.au,
linux-kernel@vger.kernel.org, joel@jms.id.au,
Rashmica Gupta <rashmica.g@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] gpio: Add in ast2600 details to Aspeed driver
Date: Wed, 4 Sep 2019 16:12:44 +1000 [thread overview]
Message-ID: <20190904061245.30770-3-rashmica.g@gmail.com> (raw)
In-Reply-To: <20190904061245.30770-1-rashmica.g@gmail.com>
The ast2600 has two gpio controllers, one for 3.6V GPIOS and one for 1.8V GPIOS.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
---
drivers/gpio/gpio-aspeed.c | 29 +++++++++++++++++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 60ab042c9129..98881c99d0b9 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -662,12 +662,14 @@ static void aspeed_gpio_irq_handler(struct irq_desc *desc)
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
struct irq_chip *ic = irq_desc_get_chip(desc);
struct aspeed_gpio *data = gpiochip_get_data(gc);
- unsigned int i, p, girq;
+ unsigned int i, p, girq, banks;
unsigned long reg;
+ struct aspeed_gpio *gpio = gpiochip_get_data(gc);
chained_irq_enter(ic, desc);
- for (i = 0; i < ARRAY_SIZE(aspeed_gpio_banks); i++) {
+ banks = (gpio->config->nr_gpios >> 5) + 1;
+ for (i = 0; i < banks; i++) {
const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i];
reg = ioread32(bank_reg(data, bank, reg_irq_status));
@@ -1108,9 +1110,32 @@ static const struct aspeed_gpio_config ast2500_config =
/* 232 for simplicity, actual number is 228 (4-GPIO hole in GPIOAB) */
{ .nr_gpios = 232, .props = ast2500_bank_props, };
+static const struct aspeed_bank_props ast2600_bank_props[] = {
+ /* input output */
+ {5, 0xffffffff, 0x0000ffff}, /* U/V/W/X */
+ {6, 0xffff0000, 0x0fff0000}, /* Y/Z */
+ { },
+};
+
+static const struct aspeed_gpio_config ast2600_config =
+ /* 208 3.6V GPIOs */
+ { .nr_gpios = 208, .props = ast2600_bank_props, };
+
+static const struct aspeed_bank_props ast2600_1_8v_bank_props[] = {
+ /* input output */
+ {1, 0x0000000f, 0x0000000f}, /* E */
+ { },
+};
+
+static const struct aspeed_gpio_config ast2600_1_8v_config =
+ /* 36 1.8V GPIOs */
+ { .nr_gpios = 36, .props = ast2600_1_8v_bank_props, };
+
static const struct of_device_id aspeed_gpio_of_table[] = {
{ .compatible = "aspeed,ast2400-gpio", .data = &ast2400_config, },
{ .compatible = "aspeed,ast2500-gpio", .data = &ast2500_config, },
+ { .compatible = "aspeed,ast2600-gpio", .data = &ast2600_config, },
+ { .compatible = "aspeed,ast2600-1-8v-gpio", .data = &ast2600_1_8v_config,},
{}
};
MODULE_DEVICE_TABLE(of, aspeed_gpio_of_table);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-09-04 6:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-04 6:12 [PATCH 1/4] gpio/aspeed: Fix incorrect number of banks Rashmica Gupta
2019-09-04 6:12 ` [PATCH 2/4] gpio/aspeed: Setup irqchip dynamically Rashmica Gupta
2019-09-04 6:12 ` Rashmica Gupta [this message]
2019-09-04 16:30 ` [PATCH 3/4] gpio: Add in ast2600 details to Aspeed driver Andy Shevchenko
2019-09-04 23:34 ` Rashmica Gupta
2019-09-05 8:10 ` Andy Shevchenko
2019-09-04 6:12 ` [PATCH 4/4] gpio: Update documentation with ast2600 controllers Rashmica Gupta
2019-09-04 7:02 ` Bartosz Golaszewski
2019-09-04 23:22 ` Rashmica Gupta
2019-09-04 6:57 ` [PATCH 1/4] gpio/aspeed: Fix incorrect number of banks Bartosz Golaszewski
2019-09-04 16:27 ` Andy Shevchenko
2019-09-04 23:17 ` Rashmica Gupta
2019-09-05 8:08 ` Andy Shevchenko
2019-09-11 17:48 ` Vijay Khemka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190904061245.30770-3-rashmica.g@gmail.com \
--to=rashmica.g@gmail.com \
--cc=andrew@aj.id.au \
--cc=bgolaszewski@baylibre.com \
--cc=joel@jms.id.au \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).