From: Marcel Ziswiler <marcel@ziswiler.com>
To: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
j.bauer@endrich.com, linux-kernel@vger.kernel.org,
David Airlie <airlied@linux.ie>,
info@logictechno.com, Thierry Reding <thierry.reding@gmail.com>,
Daniel Vetter <daniel@ffwll.ch>, Sam Ravnborg <sam@ravnborg.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 2/2] drm/panel: simple: add display timings for logic technologies displays
Date: Fri, 20 Sep 2019 09:54:11 +0200 [thread overview]
Message-ID: <20190920075411.15735-2-marcel@ziswiler.com> (raw)
In-Reply-To: <20190920075411.15735-1-marcel@ziswiler.com>
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Add display timings for the following 3 display panels manufactured by
Logic Technologies Limited:
- LT161010-2NHC e.g. as found in the Toradex Capacitive Touch Display
7" Parallel [1]
- LT161010-2NHR e.g. as found in the Toradex Resistive Touch Display 7"
Parallel [2]
- LT170410-2WHC e.g. as found in the Toradex Capacitive Touch Display
10.1" LVDS [3]
Those panels may also be distributed by Endrich Bauelemente Vertriebs
GmbH [4].
[1] https://docs.toradex.com/104497-7-inch-parallel-capacitive-touch-display-800x480-datasheet.pdf
[2] https://docs.toradex.com/104498-7-inch-parallel-resistive-touch-display-800x480.pdf
[3] https://docs.toradex.com/105952-10-1-inch-lvds-capacitive-touch-display-1280x800-datasheet.pdf
[4] https://www.endrich.com/isi50_isi30_tft-displays/lt170410-1whc_isi30
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
drivers/gpu/drm/panel/panel-simple.c | 65 ++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 28fa6ba7b767..42bd0de25167 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2034,6 +2034,62 @@ static const struct panel_desc lg_lp129qe = {
},
};
+static const struct display_timing logictechno_lt161010_2nh_timing = {
+ .pixelclock = { 26400000, 33300000, 46800000 },
+ .hactive = { 800, 800, 800 },
+ .hfront_porch = { 16, 210, 354 },
+ .hback_porch = { 46, 46, 46 },
+ .hsync_len = { 1, 20, 40 },
+ .vactive = { 480, 480, 480 },
+ .vfront_porch = { 7, 22, 147 },
+ .vback_porch = { 23, 23, 23 },
+ .vsync_len = { 1, 10, 20 },
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+ DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE |
+ DISPLAY_FLAGS_SYNC_POSEDGE,
+};
+
+static const struct panel_desc logictechno_lt161010_2nh = {
+ .timings = &logictechno_lt161010_2nh_timing,
+ .num_timings = 1,
+ .size = {
+ .width = 154,
+ .height = 86,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH |
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
+ DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE,
+};
+
+static const struct display_timing logictechno_lt170410_2whc_timing = {
+ .pixelclock = { 68900000, 71100000, 7340000 },
+ .hactive = { 1280, 1280, 1280 },
+ .hfront_porch = { 23, 60, 71 },
+ .hback_porch = { 23, 60, 71 },
+ .hsync_len = { 15, 40, 47 },
+ .vactive = { 800, 800, 800 },
+ .vfront_porch = { 5, 7, 10 },
+ .vback_porch = { 5, 7, 10 },
+ .vsync_len = { 6, 9, 12 },
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+ DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE |
+ DISPLAY_FLAGS_SYNC_POSEDGE,
+};
+
+static const struct panel_desc logictechno_lt170410_2whc = {
+ .timings = &logictechno_lt170410_2whc_timing,
+ .num_timings = 1,
+ .size = {
+ .width = 217,
+ .height = 136,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH |
+ DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
+ DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE,
+};
+
static const struct drm_display_mode mitsubishi_aa070mc01_mode = {
.clock = 30400,
.hdisplay = 800,
@@ -3264,6 +3320,15 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "lg,lp129qe",
.data = &lg_lp129qe,
+ }, {
+ .compatible = "logictechno,lt161010-2nhc",
+ .data = &logictechno_lt161010_2nh,
+ }, {
+ .compatible = "logictechno,lt161010-2nhr",
+ .data = &logictechno_lt161010_2nh,
+ }, {
+ .compatible = "logictechno,lt170410-2whc",
+ .data = &logictechno_lt170410_2whc,
}, {
.compatible = "mitsubishi,aa070mc01-ca1",
.data = &mitsubishi_aa070mc01,
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-09-20 7:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-20 7:54 [PATCH v1 1/2] dt-bindings: add vendor prefix for logic technologies limited Marcel Ziswiler
2019-09-20 7:54 ` Marcel Ziswiler [this message]
2019-09-23 9:08 ` [PATCH v1 2/2] drm/panel: simple: add display timings for logic technologies displays Philippe Schenker
2019-10-01 22:05 ` Rob Herring
2019-10-02 10:27 ` Philippe Schenker
2019-10-03 15:59 ` Rob Herring
2019-10-04 7:09 ` Philippe Schenker
2019-09-23 9:07 ` [PATCH v1 1/2] dt-bindings: add vendor prefix for logic technologies limited Philippe Schenker
2019-10-01 22:09 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190920075411.15735-2-marcel@ziswiler.com \
--to=marcel@ziswiler.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=info@logictechno.com \
--cc=j.bauer@endrich.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).