[RESEND,PATCH 00/13] MT6779 IOMMU SUPPORT

[Chao Hao <chao.hao@mediatek.com>]

I am sorry that previous patchset(2019/10/28) has a problem with e-mail format, some websites don't recevied it,
so please based on this patchset to review, thanks!

This patchset adds mt6779 iommu support and adjusts mtk iommu software architecture mainly.
1. Add mt6779 basic function, such as smi_larb port define, registers define and so on.
2. In addition, this patchset will adjust current mtk iommu SW architecture mainly to adapt all the mtk platforms:
   Firstly, mt6779 iommu can support more HW modules, but some modules have special requirements for iova region,
   for example, CCU only can access 0x4000_0000~0x47ff_ffff, VPU only can access 0x7da0_0000~0x7fbf_ffff. Current
   architecture only support one iommu domain(include 0~4GB), all the modules allocate iova from 0~4GB region, so
   it doesn't ensure to allocate expected iova region for special module(CCU and VPU). In order to resolve the problem,
   we will create different iommu domains for special module, and every domain can include iova region which module
   needs.
   Secondly, all the iommus share one page table for current architecture by "mtk_iommu_get_m4u_data", to make the
   architecture look clearly, we will create a global page table firstly(mtk_iommu_pgtable), and all the iommus can
   use it. One page table can include 4GB iova space, so multiple iommu domains are created based on the same page
   table. New SW architecture diagram is as below:

                          iommu0   iommu1
                             |        |
                             ----------
                                  |
                         mtk_iommu_pgtable
                                  |
             ------------------------------------------
             |                    |                   |
       mtk_iommu_domain1   mtk_iommu_domain2   mtk_iommu_domain3
             |                    |                   |
        iommu_group1         iommu_group2        iommu_group3
             |                    |                   |
        iommu_domain1       iommu_domain2        iommu_domain3
             |                    |                   |
      iova region1(normal)  iova region2(CCU)   iova region3(VPU)

This patchset depends on "Improve tlb range flush"[1] and based on v5.4-rc1.
[1]http://lists.infradead.org/pipermail/linux-mediatek/2019-October/024207.html

Chao Hao (13):
  dt-bindings: mediatek: Add bindings for MT6779
  iommu/mediatek: Add mt6779 IOMMU basic support
  iommu/mediatek: Add mtk_iommu_pgtable structure
  iommu/mediatek: Remove mtk_iommu_domain_finalise
  iommu/mediatek: Remove pgtable info in mtk_iommu_domain
  iommu/mediatek: Change get the way of m4u_group
  iommu/mediatek: Add smi_larb info about device
  iommu/mediatek: Add mtk_domain_data structure
  iommu/mediatek: Remove the usage of m4u_dom variable
  iommu/mediatek: Remove mtk_iommu_get_m4u_data api
  iommu/mediatek: Add iova reserved function
  iommu/mediatek: Change single domain to multiple domains
  iommu/mediatek: Add multiple mtk_iommu_domain support for mt6779

 .../bindings/iommu/mediatek,iommu.txt         |   2 +
 drivers/iommu/mtk_iommu.c                     | 488 +++++++++++++++---
 drivers/iommu/mtk_iommu.h                     |  50 +-
 include/dt-bindings/memory/mt6779-larb-port.h | 217 ++++++++
 4 files changed, 685 insertions(+), 72 deletions(-)

--
2.18.0




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel