From: Sakari Ailus <sakari.ailus@iki.fi>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: devicetree@vger.kernel.org, c.barrett@framos.com,
linux-kernel@vger.kernel.org, a.brela@framos.com,
peter.griffin@linaro.org, mchehab@kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: Re: [PATCH 3/5] media: i2c: imx290: Add RAW12 mode support
Date: Tue, 3 Dec 2019 10:54:17 +0200 [thread overview]
Message-ID: <20191203085417.GB5282@valkosipuli.retiisi.org.uk> (raw)
In-Reply-To: <20191129190541.30315-4-manivannan.sadhasivam@linaro.org>
Hi Manivannan,
On Sat, Nov 30, 2019 at 12:35:39AM +0530, Manivannan Sadhasivam wrote:
> IMX290 is capable of outputting frames in both Raw Bayer (packed) 10 and
> 12 bit formats. Since the driver already supports RAW10 mode, let's add
> the missing RAW12 mode as well.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> drivers/media/i2c/imx290.c | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> index e218c959a729..d5bb3a59ac46 100644
> --- a/drivers/media/i2c/imx290.c
> +++ b/drivers/media/i2c/imx290.c
> @@ -75,6 +75,7 @@ struct imx290 {
> struct clk *xclk;
> struct regmap *regmap;
> int nlanes;
> + u8 bpp;
>
> struct v4l2_subdev sd;
> struct v4l2_fwnode_endpoint ep;
> @@ -98,6 +99,7 @@ struct imx290_pixfmt {
>
> static const struct imx290_pixfmt imx290_formats[] = {
> { MEDIA_BUS_FMT_SRGGB10_1X10 },
> + { MEDIA_BUS_FMT_SRGGB12_1X12 },
> };
>
> static const struct regmap_config imx290_regmap_config = {
> @@ -265,6 +267,18 @@ static const struct imx290_regval imx290_10bit_settings[] = {
> { 0x300b, 0x00},
> };
>
> +static const struct imx290_regval imx290_12bit_settings[] = {
> + { 0x3005, 0x01 },
> + { 0x3046, 0x01 },
> + { 0x3129, 0x00 },
> + { 0x317c, 0x00 },
> + { 0x31ec, 0x0e },
> + { 0x3441, 0x0c },
> + { 0x3442, 0x0c },
> + { 0x300a, 0xf0 },
> + { 0x300b, 0x00 },
> +};
> +
> /* supported link frequencies */
> static const s64 imx290_link_freq[] = {
> IMX290_DEFAULT_LINK_FREQ,
> @@ -550,6 +564,21 @@ static int imx290_write_current_format(struct imx290 *imx290,
> dev_err(imx290->dev, "Could not set format registers\n");
> return ret;
> }
> +
> + imx290->bpp = 10;
> +
> + break;
> + case MEDIA_BUS_FMT_SRGGB12_1X12:
> + ret = imx290_set_register_array(imx290, imx290_12bit_settings,
> + ARRAY_SIZE(
> + imx290_12bit_settings));
> + if (ret < 0) {
> + dev_err(imx290->dev, "Could not set format registers\n");
> + return ret;
> + }
> +
> + imx290->bpp = 12;
> +
> break;
> default:
> dev_err(imx290->dev, "Unknown pixel format\n");
> @@ -910,6 +939,9 @@ static int imx290_probe(struct i2c_client *client)
> goto free_err;
> }
>
> + /* Default bits per pixel value */
> + imx290->bpp = 10;
Where is the format being initialised at the moment? Nowhere?
If that is the case, I think it should be fixed before this patch.
> +
> mutex_init(&imx290->lock);
>
> v4l2_ctrl_handler_init(&imx290->ctrls, 4);
--
Kind regards,
Sakari Ailus
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-12-03 8:55 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-29 19:05 [PATCH 0/5] Improvements to IMX290 CMOS driver Manivannan Sadhasivam
2019-11-29 19:05 ` [PATCH 1/5] media: i2c: imx290: Add support for 2 data lanes Manivannan Sadhasivam
2019-12-03 8:45 ` Sakari Ailus
2019-12-15 17:34 ` Manivannan Sadhasivam
2019-11-29 19:05 ` [PATCH 2/5] media: i2c: imx290: Add support for test pattern generation Manivannan Sadhasivam
2019-12-03 8:48 ` Sakari Ailus
2019-12-15 17:35 ` Manivannan Sadhasivam
2019-11-29 19:05 ` [PATCH 3/5] media: i2c: imx290: Add RAW12 mode support Manivannan Sadhasivam
2019-11-29 19:49 ` Fabio Estevam
2019-11-30 14:09 ` Manivannan Sadhasivam
2019-12-03 8:54 ` Sakari Ailus [this message]
2019-12-15 17:46 ` Manivannan Sadhasivam
2019-12-27 15:28 ` Sakari Ailus
2019-11-29 19:05 ` [PATCH 4/5] media: i2c: imx290: Add support to enumerate all frame sizes Manivannan Sadhasivam
2019-12-03 8:56 ` Sakari Ailus
2019-12-15 17:48 ` Manivannan Sadhasivam
[not found] ` <CAFP0Ok8Vqze8ZRyT1WvMXZeBLcx7oKcTO1Kad4kSFLbpHkok-A@mail.gmail.com>
2019-12-16 4:04 ` Manivannan Sadhasivam
2019-11-29 19:05 ` [PATCH 5/5] media: i2c: imx290: Add configurable link frequency and pixel rate Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191203085417.GB5282@valkosipuli.retiisi.org.uk \
--to=sakari.ailus@iki.fi \
--cc=a.brela@framos.com \
--cc=c.barrett@framos.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mchehab@kernel.org \
--cc=peter.griffin@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).