From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-5.5 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,UNWANTED_LANGUAGE_BODY,USER_AGENT_SANE_1 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2EB0EC43603 for ; Sun, 15 Dec 2019 17:35:03 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id A880B20726 for ; Sun, 15 Dec 2019 17:34:53 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="nhBNsAcd"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="fKV7iVkg" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org A880B20726 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=linaro.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=iQvW06u8f3SajBRsXpaQf9ZBCHrNHW+xum0pNH1Na8E=; b=nhBNsAcdyJJE+p gurBfk6v+yXNjIPPOiM6RwShidDoOVWpy2DWfw8n/aMssbcd74cW3TeR4KWM9feOv/KKdiOc73Pad +GAMVHezjH6PLcEO3x0CMYNwRrLNv5r6LJpUGzErrD91lPlvq3MHc/nuGuXP//eovTu/2mxcGVomA 9cW00F0tM9hMmKT/Vx/QOuox+R6dAX2wnXT23TsAxfI2+RGEeLRSX7fFFpWhDRhHP13/xTvK5WOQG RwSxHIgQyxNu3vi6k4pA9qBiWNfjzX3T0Mv1Avsa+bMEzU26WqxjgcOSpw/ryzQ76YmAn1U4Lwbw2 Fn68GxgzrC1lpGizy4Wg==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1igXn0-0004k5-K1; Sun, 15 Dec 2019 17:34:42 +0000 Received: from mail-pf1-x443.google.com ([2607:f8b0:4864:20::443]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1igXmw-0004jW-KZ for linux-arm-kernel@lists.infradead.org; Sun, 15 Dec 2019 17:34:40 +0000 Received: by mail-pf1-x443.google.com with SMTP id l127so2528913pfl.1 for ; Sun, 15 Dec 2019 09:34:37 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to:user-agent; bh=6ujSsSDcBK3n4Bqga7fblzha00kGWmWX/mW5knjSwJI=; b=fKV7iVkg13oi3VruUvio7vqK8Q2GWFGCtNPCZ0HOvf1in8V7rly04vSo4vslMzhp06 D2KT5fcASGtjlxvFvUuy+dPePqli/AWrf7usu7sXa5Hi2yZD6N3SfMAFgK1Q2btTli3u seQC10OwxDddTwndiPRo0qfBsNqHSBhMeJ2twxVULPp3y+6Vv9fGsz5sghc9VhuymnN0 zyqkdkRg5YDRGs2DIBvCUIPs099QX0kWhU+EOE6jBNvieO4yX1rtGTiQoOhblZDKxaYW SUtN0CeytIh2QeBni/yLEIairIY8jrRh9AgcK+oQJRkwePC6+yaJfbbm/LKdL9a9BZmN CznQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to:user-agent; bh=6ujSsSDcBK3n4Bqga7fblzha00kGWmWX/mW5knjSwJI=; b=mz+I2dkKJJV86HlrRkpOQJ90lftfOjAdWvCCNGHVg253HJOfJBzKSYP6x6zubEja/C qPwFnGEa5f4YK1d0GGx04NhjvwE150kc3LsCyQH8l7GvKWA/Z6Iy1DYfmWNI7B+/DuI/ dycTpF7zOtj8pBkLTb6FNe0Plhm9nF3dFeeY+ZmFFlxp4JZgag7sDAseaI5eyLtSSeV4 cAbr7/YDJ0oaV02ZZbtjn0aeUgzsyGgvwpjCAKfSDs8wtaVgnt6UuLjaeKrNi/uLRvY6 Yi5Kn9v5/lpSuJHUM2hjLO60RjNF74Lv/1upiDbN1c9OWAo2FimSprz2+X8u4Xqzrzqg s4ow== X-Gm-Message-State: APjAAAWVQ8YKigBEoG8ZWnxRfMsWQbzPXKzJdshjUfNIxJz462fs5orp cA9cEIBQJ7dcLdQPfdHOSs6KuZ/zVFWy X-Google-Smtp-Source: APXvYqwwXd8GtkKGFw4dphFWy1z9O5IvZPRJrfF08u65UmzJenhFAZT/srpftlljFJd8KFgNGCFA0Q== X-Received: by 2002:a63:7045:: with SMTP id a5mr13479457pgn.49.1576431277135; Sun, 15 Dec 2019 09:34:37 -0800 (PST) Received: from Mani-XPS-13-9360 ([2409:4072:78f:3e30:ad66:df45:6a09:a260]) by smtp.gmail.com with ESMTPSA id q21sm18928635pff.105.2019.12.15.09.34.30 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Sun, 15 Dec 2019 09:34:35 -0800 (PST) Date: Sun, 15 Dec 2019 23:04:27 +0530 From: Manivannan Sadhasivam To: Sakari Ailus Subject: Re: [PATCH 1/5] media: i2c: imx290: Add support for 2 data lanes Message-ID: <20191215173427.GA11427@Mani-XPS-13-9360> References: <20191129190541.30315-1-manivannan.sadhasivam@linaro.org> <20191129190541.30315-2-manivannan.sadhasivam@linaro.org> <20191203084520.GP833@valkosipuli.retiisi.org.uk> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20191203084520.GP833@valkosipuli.retiisi.org.uk> User-Agent: Mutt/1.9.4 (2018-02-28) X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20191215_093438_774185_DB7F4DA0 X-CRM114-Status: GOOD ( 28.95 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, c.barrett@framos.com, linux-kernel@vger.kernel.org, a.brela@framos.com, peter.griffin@linaro.org, mchehab@kernel.org, linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org Hi Sakari, On Tue, Dec 03, 2019 at 10:45:20AM +0200, Sakari Ailus wrote: > Hi Manivannan, > > Thanks for the patchset. > > On Sat, Nov 30, 2019 at 12:35:37AM +0530, Manivannan Sadhasivam wrote: > > The IMX290 sensor can output frames with 2/4 CSI2 data lanes. This commit > > adds support for 2 lane mode in addition to the 4 lane and also > > configuring the data lane settings in the driver based on system > > configuration. > > > > Signed-off-by: Manivannan Sadhasivam > > --- > > drivers/media/i2c/imx290.c | 130 ++++++++++++++++++++++++++++++++++--- > > 1 file changed, 121 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c > > index f7678e5a5d87..1d49910937fb 100644 > > --- a/drivers/media/i2c/imx290.c > > +++ b/drivers/media/i2c/imx290.c > > @@ -25,7 +25,18 @@ > > #define IMX290_STANDBY 0x3000 > > #define IMX290_REGHOLD 0x3001 > > #define IMX290_XMSTA 0x3002 > > +#define IMX290_FR_FDG_SEL 0x3009 > > #define IMX290_GAIN 0x3014 > > +#define IMX290_HMAX_LOW 0x301c > > +#define IMX290_HMAX_HIGH 0x301d > > +#define IMX290_PHY_LANE_NUM 0x3407 > > +#define IMX290_CSI_LANE_MODE 0x3443 > > + > > +/* HMAX fields */ > > +#define IMX290_HMAX_2_1920 0x1130 > > +#define IMX290_HMAX_4_1920 0x0898 > > +#define IMX290_HMAX_2_720 0x19C8 > > +#define IMX290_HMAX_4_720 0x0CE4 > > > > #define IMX290_DEFAULT_LINK_FREQ 445500000 > > > > @@ -56,6 +67,7 @@ struct imx290 { > > struct device *dev; > > struct clk *xclk; > > struct regmap *regmap; > > + int nlanes; > > You're using u8 for another small (unsigned) integer later. How about u8 > here? > Yeah, this is a left over. I was initially trying to use some error checking with this! Will change it to u8. > > > > struct v4l2_subdev sd; > > struct v4l2_fwnode_endpoint ep; > > @@ -89,14 +101,11 @@ static const struct regmap_config imx290_regmap_config = { > > > > static const struct imx290_regval imx290_global_init_settings[] = { > > { 0x3007, 0x00 }, > > - { 0x3009, 0x00 }, > > { 0x3018, 0x65 }, > > { 0x3019, 0x04 }, > > { 0x301a, 0x00 }, > > - { 0x3443, 0x03 }, > > { 0x3444, 0x20 }, > > { 0x3445, 0x25 }, > > - { 0x3407, 0x03 }, > > { 0x303a, 0x0c }, > > { 0x3040, 0x00 }, > > { 0x3041, 0x00 }, > > @@ -169,7 +178,6 @@ static const struct imx290_regval imx290_1080p_settings[] = { > > { 0x3164, 0x1a }, > > { 0x3480, 0x49 }, > > /* data rate settings */ > > - { 0x3009, 0x01 }, > > { 0x3405, 0x10 }, > > { 0x3446, 0x57 }, > > { 0x3447, 0x00 }, > > @@ -187,8 +195,6 @@ static const struct imx290_regval imx290_1080p_settings[] = { > > { 0x3453, 0x00 }, > > { 0x3454, 0x17 }, > > { 0x3455, 0x00 }, > > - { 0x301c, 0x98 }, > > - { 0x301d, 0x08 }, > > }; > > > > static const struct imx290_regval imx290_720p_settings[] = { > > @@ -210,7 +216,6 @@ static const struct imx290_regval imx290_720p_settings[] = { > > { 0x3164, 0x1a }, > > { 0x3480, 0x49 }, > > /* data rate settings */ > > - { 0x3009, 0x01 }, > > { 0x3405, 0x10 }, > > { 0x3446, 0x4f }, > > { 0x3447, 0x00 }, > > @@ -228,8 +233,6 @@ static const struct imx290_regval imx290_720p_settings[] = { > > { 0x3453, 0x00 }, > > { 0x3454, 0x17 }, > > { 0x3455, 0x00 }, > > - { 0x301c, 0xe4 }, > > - { 0x301d, 0x0c }, > > }; > > > > static const struct imx290_regval imx290_10bit_settings[] = { > > @@ -522,6 +525,25 @@ static int imx290_write_current_format(struct imx290 *imx290, > > return 0; > > } > > > > +static int imx290_set_hmax(struct imx290 *imx290, u32 val) > > +{ > > + int ret; > > + > > + ret = imx290_write_reg(imx290, IMX290_HMAX_LOW, (val & 0xff)); > > + if (ret) { > > + dev_err(imx290->dev, "Error setting HMAX register\n"); > > + return ret; > > + } > > + > > + ret = imx290_write_reg(imx290, IMX290_HMAX_HIGH, ((val >> 8) & 0xff)); > > + if (ret) { > > + dev_err(imx290->dev, "Error setting HMAX register\n"); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > /* Start streaming */ > > static int imx290_start_streaming(struct imx290 *imx290) > > { > > @@ -551,6 +573,40 @@ static int imx290_start_streaming(struct imx290 *imx290) > > return ret; > > } > > > > + switch (imx290->nlanes) { > > + case 2: > > + if (imx290->current_mode->width == 1920) { > > + ret = imx290_set_hmax(imx290, IMX290_HMAX_2_1920); > > + if (ret < 0) > > + return ret; > > + } else { > > + ret = imx290_set_hmax(imx290, IMX290_HMAX_2_720); > > + if (ret < 0) > > + return ret; > > + } > > + > > + break; > > + case 4: > > + if (imx290->current_mode->width == 1920) { > > + ret = imx290_set_hmax(imx290, IMX290_HMAX_4_1920); > > + if (ret < 0) > > + return ret; > > + } else { > > + ret = imx290_set_hmax(imx290, IMX290_HMAX_4_720); > > + if (ret < 0) > > + return ret; > > + } > > + > > + break; > > + default: > > + /* > > + * We should never hit this since the data lane count is > > + * validated in probe itself > > + */ > > + dev_err(imx290->dev, "Lane configuration not supported\n"); > > + return -EINVAL; > > + } > > + > > /* Apply customized values from user */ > > ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler); > > if (ret) { > > @@ -607,6 +663,49 @@ static int imx290_get_regulators(struct device *dev, struct imx290 *imx290) > > imx290->supplies); > > } > > > > +static int imx290_set_data_lanes(struct imx290 *imx290) > > +{ > > + int ret = 0, laneval, frsel; > > + > > + switch (imx290->nlanes) { > > + case 2: > > + laneval = 0x01; > > + frsel = 0x02; > > + break; > > + case 4: > > + laneval = 0x03; > > + frsel = 0x01; > > + break; > > + default: > > + /* > > + * We should never hit this since the data lane count is > > + * validated in probe itself > > + */ > > + dev_err(imx290->dev, "Lane configuration not supported\n"); > > + ret = -EINVAL; > > + goto exit; > > + } > > + > > + ret = imx290_write_reg(imx290, IMX290_PHY_LANE_NUM, laneval); > > + if (ret) { > > + dev_err(imx290->dev, "Error setting Physical Lane number register\n"); > > + goto exit; > > + } > > + > > + ret = imx290_write_reg(imx290, IMX290_CSI_LANE_MODE, laneval); > > + if (ret) { > > + dev_err(imx290->dev, "Error setting CSI Lane mode register\n"); > > + goto exit; > > + } > > + > > + ret = imx290_write_reg(imx290, IMX290_FR_FDG_SEL, frsel); > > + if (ret) > > + dev_err(imx290->dev, "Error setting FR/FDG SEL register\n"); > > + > > +exit: > > + return ret; > > +} > > + > > static int imx290_power_on(struct device *dev) > > { > > struct i2c_client *client = to_i2c_client(dev); > > @@ -703,6 +802,16 @@ static int imx290_probe(struct i2c_client *client) > > goto free_err; > > } > > > > + /* Get number of data lanes */ > > + imx290->nlanes = imx290->ep.bus.mipi_csi2.num_data_lanes; > > + if (imx290->nlanes != 2 && imx290->nlanes != 4) { > > + dev_err(dev, "Invalid data lanes: %d\n", imx290->nlanes); > > + ret = -EINVAL; > > + goto free_err; > > + } > > + > > + dev_dbg(dev, "Using %u data lanes\n", imx290->nlanes); > > + > > if (!imx290->ep.nr_of_link_frequencies) { > > dev_err(dev, "link-frequency property not found in DT\n"); > > ret = -EINVAL; > > @@ -822,6 +931,9 @@ static int imx290_probe(struct i2c_client *client) > > goto free_entity; > > } > > > > + /* Set data lane count */ > > + imx290_set_data_lanes(imx290); > > The sensor is likely (but not necessarily) about to be powered off here. > Wouldn't this also belong to be put to the power on sequence? > Agree, will add. Thanks, Mani > > + > > pm_runtime_set_active(dev); > > pm_runtime_enable(dev); > > pm_runtime_idle(dev); > > -- > Regards, > > Sakari Ailus _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel