[PATCH v4 13/13] iommu/arm-smmu-v3: Add support for PCI PASID

[Jean-Philippe Brucker <jean-philippe@linaro.org>]

Enable PASID for PCI devices that support it. Since the SSID tables are
allocated by arm_smmu_attach_dev(), PASID has to be enabled early enough.
arm_smmu_dev_feature_enable() would be too late, since by that time the
main DMA domain has already been attached. Do it in add_device() instead.

Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
---
 drivers/iommu/arm-smmu-v3.c | 55 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index e62ca80f2f76..8e95ecad4c9a 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -2644,6 +2644,53 @@ static void arm_smmu_disable_ats(struct arm_smmu_master *master)
 	atomic_dec(&smmu_domain->nr_ats_masters);
 }
 
+static int arm_smmu_enable_pasid(struct arm_smmu_master *master)
+{
+	int ret;
+	int features;
+	int num_pasids;
+	struct pci_dev *pdev;
+
+	if (!dev_is_pci(master->dev))
+		return -ENODEV;
+
+	pdev = to_pci_dev(master->dev);
+
+	features = pci_pasid_features(pdev);
+	if (features < 0)
+		return features;
+
+	num_pasids = pci_max_pasids(pdev);
+	if (num_pasids <= 0)
+		return num_pasids;
+
+	ret = pci_enable_pasid(pdev, features);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to enable PASID\n");
+		return ret;
+	}
+
+	master->ssid_bits = min_t(u8, ilog2(num_pasids),
+				  master->smmu->ssid_bits);
+	return 0;
+}
+
+static void arm_smmu_disable_pasid(struct arm_smmu_master *master)
+{
+	struct pci_dev *pdev;
+
+	if (!dev_is_pci(master->dev))
+		return;
+
+	pdev = to_pci_dev(master->dev);
+
+	if (!pdev->pasid_enabled)
+		return;
+
+	master->ssid_bits = 0;
+	pci_disable_pasid(pdev);
+}
+
 static void arm_smmu_detach_dev(struct arm_smmu_master *master)
 {
 	unsigned long flags;
@@ -2852,13 +2899,16 @@ static int arm_smmu_add_device(struct device *dev)
 
 	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
 
+	/* Note that PASID must be enabled before, and disabled after ATS */
+	arm_smmu_enable_pasid(master);
+
 	if (!(smmu->features & ARM_SMMU_FEAT_2_LVL_CDTAB))
 		master->ssid_bits = min_t(u8, master->ssid_bits,
 					  CTXDESC_LINEAR_CDMAX);
 
 	ret = iommu_device_link(&smmu->iommu, dev);
 	if (ret)
-		goto err_free_master;
+		goto err_disable_pasid;
 
 	group = iommu_group_get_for_dev(dev);
 	if (IS_ERR(group)) {
@@ -2871,6 +2921,8 @@ static int arm_smmu_add_device(struct device *dev)
 
 err_unlink:
 	iommu_device_unlink(&smmu->iommu, dev);
+err_disable_pasid:
+	arm_smmu_disable_pasid(master);
 err_free_master:
 	kfree(master);
 	fwspec->iommu_priv = NULL;
@@ -2891,6 +2943,7 @@ static void arm_smmu_remove_device(struct device *dev)
 	arm_smmu_detach_dev(master);
 	iommu_group_remove_device(dev);
 	iommu_device_unlink(&smmu->iommu, dev);
+	arm_smmu_disable_pasid(master);
 	kfree(master);
 	iommu_fwspec_free(dev);
 }
-- 
2.24.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel