From: Andre Przywara <andre.przywara@arm.com>
To: "David S . Miller" <davem@davemloft.net>,
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Cc: Robert Hancock <hancock@sedsystems.ca>,
netdev@vger.kernel.org, Michal Simek <michal.simek@xilinx.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 10/14] net: axienet: Wrap DMA pointer writes to prepare for 64 bit
Date: Fri, 10 Jan 2020 11:54:11 +0000 [thread overview]
Message-ID: <20200110115415.75683-11-andre.przywara@arm.com> (raw)
In-Reply-To: <20200110115415.75683-1-andre.przywara@arm.com>
Newer versions of the Xilink DMA IP support busses with more than 32
address bits, by introducing an MSB word for the registers holding DMA
pointers (tail/current, RX/TX descriptor addresses).
On IP configured for more than 32 bits, it is also *required* to write
both words, to let the IP recognise this as a start condition for an
MM2S request, for instance.
Wrap the DMA pointer writes with a separate function, to add this
functionality later. For now we stick to the lower 32 bits.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
.../net/ethernet/xilinx/xilinx_axienet_main.c | 26 ++++++++++++-------
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 64f799f3d248..bbdda4b0c677 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -147,6 +147,12 @@ static inline void axienet_dma_out32(struct axienet_local *lp,
iowrite32(value, lp->dma_regs + reg);
}
+static void axienet_dma_out_addr(struct axienet_local *lp, off_t reg,
+ dma_addr_t addr)
+{
+ axienet_dma_out32(lp, reg, lower_32_bits(addr));
+}
+
/**
* axienet_dma_bd_release - Release buffer descriptor rings
* @ndev: Pointer to the net_device structure
@@ -285,18 +291,18 @@ static int axienet_dma_bd_init(struct net_device *ndev)
/* Populate the tail pointer and bring the Rx Axi DMA engine out of
* halted state. This will make the Rx side ready for reception.
*/
- axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
+ axienet_dma_out_addr(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
cr | XAXIDMA_CR_RUNSTOP_MASK);
- axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
- (sizeof(*lp->rx_bd_v) * (lp->rx_bd_num - 1)));
+ axienet_dma_out_addr(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
+ (sizeof(*lp->rx_bd_v) * (lp->rx_bd_num - 1)));
/* Write to the RS (Run-stop) bit in the Tx channel control register.
* Tx channel is now ready to run. But only after we write to the
* tail pointer register that the Tx channel will start transmitting.
*/
- axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
+ axienet_dma_out_addr(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
cr | XAXIDMA_CR_RUNSTOP_MASK);
@@ -739,7 +745,7 @@ axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
/* Start the transfer */
- axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p);
+ axienet_dma_out_addr(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p);
if (++lp->tx_bd_tail >= lp->tx_bd_num)
lp->tx_bd_tail = 0;
@@ -829,7 +835,7 @@ static void axienet_recv(struct net_device *ndev)
ndev->stats.rx_bytes += size;
if (tail_p)
- axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p);
+ axienet_dma_out_addr(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p);
}
/**
@@ -1677,18 +1683,18 @@ static void axienet_dma_err_handler(unsigned long data)
/* Populate the tail pointer and bring the Rx Axi DMA engine out of
* halted state. This will make the Rx side ready for reception.
*/
- axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
+ axienet_dma_out_addr(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
cr | XAXIDMA_CR_RUNSTOP_MASK);
- axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
- (sizeof(*lp->rx_bd_v) * (lp->rx_bd_num - 1)));
+ axienet_dma_out_addr(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p +
+ (sizeof(*lp->rx_bd_v) * (lp->rx_bd_num - 1)));
/* Write to the RS (Run-stop) bit in the Tx channel control register.
* Tx channel is now ready to run. But only after we write to the
* tail pointer register that the Tx channel will start transmitting
*/
- axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
+ axienet_dma_out_addr(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
cr | XAXIDMA_CR_RUNSTOP_MASK);
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-10 11:58 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-10 11:54 [PATCH 00/14] net: axienet: Error handling, SGMII and 64-bit DMA fixes Andre Przywara
2020-01-10 11:54 ` [PATCH 01/14] net: xilinx: temac: Relax Kconfig dependencies Andre Przywara
2020-01-10 14:19 ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 02/14] net: axienet: Propagate failure of DMA descriptor setup Andre Przywara
2020-01-10 14:54 ` Radhey Shyam Pandey
2020-01-10 17:53 ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 03/14] net: axienet: Fix DMA descriptor cleanup path Andre Przywara
2020-01-10 15:14 ` Radhey Shyam Pandey
2020-01-10 15:43 ` Andre Przywara
2020-01-10 17:05 ` Radhey Shyam Pandey
2020-01-16 18:03 ` Andre Przywara
2020-01-20 18:32 ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 04/14] net: axienet: Improve DMA error handling Andre Przywara
2020-01-10 15:26 ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 05/14] net: axienet: Factor out TX descriptor chain cleanup Andre Przywara
2020-01-10 18:04 ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 06/14] net: axienet: Check for DMA mapping errors Andre Przywara
2020-01-13 5:54 ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 07/14] net: axienet: Fix SGMII support Andre Przywara
2020-01-10 14:04 ` Andrew Lunn
2020-01-10 14:20 ` Andre Przywara
2020-01-10 14:26 ` Andrew Lunn
2020-01-10 15:04 ` Russell King - ARM Linux admin
2020-01-10 15:22 ` Russell King - ARM Linux admin
2020-01-10 17:04 ` Russell King - ARM Linux admin
2020-01-18 11:22 ` Russell King - ARM Linux admin
2020-01-20 14:50 ` Andre Przywara
2020-01-20 15:45 ` Russell King - ARM Linux admin
2020-01-27 17:04 ` Andre Przywara
2020-01-27 17:20 ` Radhey Shyam Pandey
2020-01-27 18:53 ` Russell King - ARM Linux admin
2020-04-22 1:45 ` Xilinx axienet 1000BaseX support (was: Re: [PATCH 07/14] net: axienet: Fix SGMII support) Robert Hancock
2020-04-22 7:51 ` Russell King - ARM Linux admin
2020-04-22 16:31 ` Xilinx axienet 1000BaseX support Robert Hancock
2020-04-28 21:59 ` Robert Hancock
2020-04-28 23:01 ` Russell King - ARM Linux admin
2020-04-28 23:51 ` Robert Hancock
2020-04-29 8:21 ` Russell King - ARM Linux admin
2020-01-10 14:58 ` [PATCH 07/14] net: axienet: Fix SGMII support Russell King - ARM Linux admin
2020-01-10 17:32 ` Andre Przywara
2020-01-10 18:05 ` Russell King - ARM Linux admin
2020-01-10 19:33 ` Andrew Lunn
2020-01-10 11:54 ` [PATCH 08/14] net: axienet: Drop MDIO interrupt registers from ethtools dump Andre Przywara
2020-01-13 6:02 ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 09/14] net: axienet: Add mii-tool support Andre Przywara
2020-01-13 6:12 ` Radhey Shyam Pandey
2020-03-12 11:41 ` Andre Przywara
2020-01-10 11:54 ` Andre Przywara [this message]
2020-01-10 11:54 ` [PATCH 11/14] net: axienet: Upgrade descriptors to hold 64-bit addresses Andre Przywara
2020-01-14 16:35 ` Radhey Shyam Pandey
2020-01-14 17:29 ` Andre Przywara
2020-01-10 11:54 ` [PATCH 12/14] net: axienet: Autodetect 64-bit DMA capability Andre Przywara
2020-01-10 14:08 ` Andrew Lunn
2020-01-10 14:13 ` Andre Przywara
2020-01-10 14:22 ` Andrew Lunn
2020-01-10 15:08 ` Andre Przywara
2020-01-10 15:22 ` Andrew Lunn
2020-01-14 17:03 ` Radhey Shyam Pandey
2020-01-14 17:41 ` Andre Przywara
2020-01-15 6:02 ` Radhey Shyam Pandey
2020-01-10 11:54 ` [PATCH 13/14] net: axienet: Allow DMA to beyond 4GB Andre Przywara
2020-01-10 11:54 ` [PATCH 14/14] net: axienet: Update devicetree binding documentation Andre Przywara
2020-01-21 21:51 ` Rob Herring
2020-01-24 16:29 ` Andre Przywara
2020-01-27 9:28 ` Radhey Shyam Pandey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200110115415.75683-11-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=davem@davemloft.net \
--cc=hancock@sedsystems.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=netdev@vger.kernel.org \
--cc=radhey.shyam.pandey@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).