From: Bibby Hsieh <bibby.hsieh@mediatek.com>
To: Jassi Brar <jassisinghbrar@gmail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Rob Herring <robh+dt@kernel.org>, CK HU <ck.hu@mediatek.com>
Cc: devicetree@vger.kernel.org,
Nicolas Boichat <drinkcat@chromium.org>,
srv_heupstream@mediatek.com, linux-kernel@vger.kernel.org,
Houlong Wei <houlong.wei@mediatek.com>,
Dennis-YC Hsieh <dennis-yc.hsieh@mediatek.com>,
linux-mediatek@lists.infradead.org,
Bibby Hsieh <bibby.hsieh@mediatek.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] mailbox: mediatek: remove implementation related to atomic_exec
Date: Fri, 14 Feb 2020 12:33:24 +0800 [thread overview]
Message-ID: <20200214043325.16618-3-bibby.hsieh@mediatek.com> (raw)
In-Reply-To: <20200214043325.16618-1-bibby.hsieh@mediatek.com>
After implement flush, client can flush the executing
command buffer or abort the still waiting for event
command buffer, so controller do not need to implement
atomic_exe feature. remove it.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
drivers/mailbox/mtk-cmdq-mailbox.c | 76 ++++--------------------------
1 file changed, 8 insertions(+), 68 deletions(-)
diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 03e58ff62007..3ce777001aa5 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -57,7 +57,6 @@ struct cmdq_thread {
void __iomem *base;
struct list_head task_busy_list;
u32 priority;
- bool atomic_exec;
};
struct cmdq_task {
@@ -163,48 +162,11 @@ static void cmdq_task_insert_into_thread(struct cmdq_task *task)
cmdq_thread_invalidate_fetched_data(thread);
}
-static bool cmdq_command_is_wfe(u64 cmd)
-{
- u64 wfe_option = CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE;
- u64 wfe_op = (u64)(CMDQ_CODE_WFE << CMDQ_OP_CODE_SHIFT) << 32;
- u64 wfe_mask = (u64)CMDQ_OP_CODE_MASK << 32 | 0xffffffff;
-
- return ((cmd & wfe_mask) == (wfe_op | wfe_option));
-}
-
-/* we assume tasks in the same display GCE thread are waiting the same event. */
-static void cmdq_task_remove_wfe(struct cmdq_task *task)
-{
- struct device *dev = task->cmdq->mbox.dev;
- u64 *base = task->pkt->va_base;
- int i;
-
- dma_sync_single_for_cpu(dev, task->pa_base, task->pkt->cmd_buf_size,
- DMA_TO_DEVICE);
- for (i = 0; i < CMDQ_NUM_CMD(task->pkt); i++)
- if (cmdq_command_is_wfe(base[i]))
- base[i] = (u64)CMDQ_JUMP_BY_OFFSET << 32 |
- CMDQ_JUMP_PASS;
- dma_sync_single_for_device(dev, task->pa_base, task->pkt->cmd_buf_size,
- DMA_TO_DEVICE);
-}
-
static bool cmdq_thread_is_in_wfe(struct cmdq_thread *thread)
{
return readl(thread->base + CMDQ_THR_WAIT_TOKEN) & CMDQ_THR_IS_WAITING;
}
-static void cmdq_thread_wait_end(struct cmdq_thread *thread,
- unsigned long end_pa)
-{
- struct device *dev = thread->chan->mbox->dev;
- unsigned long curr_pa;
-
- if (readl_poll_timeout_atomic(thread->base + CMDQ_THR_CURR_ADDR,
- curr_pa, curr_pa == end_pa, 1, 20))
- dev_err(dev, "GCE thread cannot run to end.\n");
-}
-
static void cmdq_task_exec_done(struct cmdq_task *task, enum cmdq_cb_status sta)
{
struct cmdq_task_cb *cb = &task->pkt->async_cb;
@@ -384,36 +346,15 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
curr_pa = readl(thread->base + CMDQ_THR_CURR_ADDR);
end_pa = readl(thread->base + CMDQ_THR_END_ADDR);
-
- /*
- * Atomic execution should remove the following wfe, i.e. only
- * wait event at first task, and prevent to pause when running.
- */
- if (thread->atomic_exec) {
- /* GCE is executing if command is not WFE */
- if (!cmdq_thread_is_in_wfe(thread)) {
- cmdq_thread_resume(thread);
- cmdq_thread_wait_end(thread, end_pa);
- WARN_ON(cmdq_thread_suspend(cmdq, thread) < 0);
- /* set to this task directly */
- writel(task->pa_base,
- thread->base + CMDQ_THR_CURR_ADDR);
- } else {
- cmdq_task_insert_into_thread(task);
- cmdq_task_remove_wfe(task);
- smp_mb(); /* modify jump before enable thread */
- }
+ /* check boundary */
+ if (curr_pa == end_pa - CMDQ_INST_SIZE ||
+ curr_pa == end_pa) {
+ /* set to this task directly */
+ writel(task->pa_base,
+ thread->base + CMDQ_THR_CURR_ADDR);
} else {
- /* check boundary */
- if (curr_pa == end_pa - CMDQ_INST_SIZE ||
- curr_pa == end_pa) {
- /* set to this task directly */
- writel(task->pa_base,
- thread->base + CMDQ_THR_CURR_ADDR);
- } else {
- cmdq_task_insert_into_thread(task);
- smp_mb(); /* modify jump before enable thread */
- }
+ cmdq_task_insert_into_thread(task);
+ smp_mb(); /* modify jump before enable thread */
}
writel(task->pa_base + pkt->cmd_buf_size,
thread->base + CMDQ_THR_END_ADDR);
@@ -495,7 +436,6 @@ static struct mbox_chan *cmdq_xlate(struct mbox_controller *mbox,
thread = (struct cmdq_thread *)mbox->chans[ind].con_priv;
thread->priority = sp->args[1];
- thread->atomic_exec = (sp->args[2] != 0);
thread->chan = &mbox->chans[ind];
return &mbox->chans[ind];
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-14 4:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-14 4:33 [PATCH 0/3] Remove atomic_exec Bibby Hsieh
2020-02-14 4:33 ` [PATCH 1/3] mailbox: mediatek: implement flush function Bibby Hsieh
2020-02-14 5:53 ` CK Hu
2020-02-14 4:33 ` Bibby Hsieh [this message]
2020-02-14 5:54 ` [PATCH 2/3] mailbox: mediatek: remove implementation related to atomic_exec CK Hu
2020-02-14 4:33 ` [PATCH 3/3] dt-binding: gce: remove atomic_exec in mboxes property Bibby Hsieh
2020-02-14 5:05 ` CK Hu
2020-02-14 10:30 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200214043325.16618-3-bibby.hsieh@mediatek.com \
--to=bibby.hsieh@mediatek.com \
--cc=ck.hu@mediatek.com \
--cc=dennis-yc.hsieh@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=houlong.wei@mediatek.com \
--cc=jassisinghbrar@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).