From: Michael Walle <michael@walle.cc>
To: linux-serial@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>, Peng Fan <peng.fan@nxp.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Li Yang <leoyang.li@nxp.com>, Michael Walle <michael@walle.cc>,
Rob Herring <robh+dt@kernel.org>, Yuan Yao <yao.yuan@nxp.com>,
Vabhav Sharma <vabhav.sharma@nxp.com>,
Jiri Slaby <jslaby@suse.com>, Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v3 9/9] arm64: dts: ls1028a: add missing LPUART nodes
Date: Tue, 3 Mar 2020 18:43:06 +0100 [thread overview]
Message-ID: <20200303174306.6015-10-michael@walle.cc> (raw)
In-Reply-To: <20200303174306.6015-1-michael@walle.cc>
The LS1028A has six LPUART controllers. Add the nodes.
This was tested on a custom board.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 73 +++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 0843cfbe7ae1..df51e81ebe84 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -333,6 +333,79 @@
status = "disabled";
};
+
+ lpuart0: serial@2260000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2260000 0x0 0x1000>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 32>,
+ <&edma0 1 33>;
+ status = "disabled";
+ };
+
+ lpuart1: serial@2270000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2270000 0x0 0x1000>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 30>,
+ <&edma0 1 31>;
+ status = "disabled";
+ };
+
+ lpuart2: serial@2280000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2280000 0x0 0x1000>;
+ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 28>,
+ <&edma0 1 29>;
+ status = "disabled";
+ };
+
+ lpuart3: serial@2290000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x2290000 0x0 0x1000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 26>,
+ <&edma0 1 27>;
+ status = "disabled";
+ };
+
+ lpuart4: serial@22a0000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x22a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 24>,
+ <&edma0 1 25>;
+ status = "disabled";
+ };
+
+ lpuart5: serial@22b0000 {
+ compatible = "fsl,ls1028a-lpuart";
+ reg = <0x0 0x22b0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>;
+ clock-names = "ipg";
+ dma-names = "rx","tx";
+ dmas = <&edma0 1 22>,
+ <&edma0 1 23>;
+ status = "disabled";
+ };
+
edma0: dma-controller@22c0000 {
#dma-cells = <2>;
compatible = "fsl,ls1028a-edma", "fsl,vf610-edma";
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-03 17:45 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-03 17:42 [PATCH v3 0/9] tty: serial: fsl_lpuart various fixes and LS1028A support Michael Walle
2020-03-03 17:42 ` [PATCH v3 1/9] Revert "tty: serial: fsl_lpuart: drop EARLYCON_DECLARE" Michael Walle
2020-03-03 17:42 ` [PATCH v3 2/9] tty: serial: fsl_lpuart: free IDs allocated by IDA Michael Walle
2020-03-03 17:43 ` [PATCH v3 3/9] tty: serial: fsl_lpuart: handle EPROBE_DEFER for DMA Michael Walle
2020-03-03 18:47 ` Rob Herring
2020-03-03 20:57 ` Michael Walle
2020-03-03 17:43 ` [PATCH v3 4/9] tty: serial: fsl_lpuart: fix DMA mapping Michael Walle
2020-03-03 17:43 ` [PATCH v3 5/9] dt-bindings: serial: lpuart: add ls1028a compatibility Michael Walle
2020-03-03 17:43 ` [PATCH v3 6/9] tty: serial: fsl_lpuart: add LS1028A support Michael Walle
2020-03-03 17:43 ` [PATCH v3 7/9] tty: serial: fsl_lpuart: add LS1028A earlycon support Michael Walle
2020-03-03 17:43 ` [PATCH v3 8/9] arm64: dts: ls1028a: add "fsl,vf610-edma" compatible Michael Walle
2020-03-03 22:43 ` Leo Li
2020-03-03 17:43 ` Michael Walle [this message]
2020-03-03 22:49 ` [PATCH v3 0/9] tty: serial: fsl_lpuart various fixes and LS1028A support Leo Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200303174306.6015-10-michael@walle.cc \
--to=michael@walle.cc \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=vabhav.sharma@nxp.com \
--cc=yao.yuan@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).