[PATCH 2/2] ARM: dts: aspeed: zaius: Add gpio line names

From: Andrew Geissler <geissonator@gmail.com>
To: joel@jms.id.au, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Cc: linux-gpio@vger.kernel.org, openbmc@lists.ozlabs.org,
	Andrew Geissler <geissonator@yahoo.com>
Subject: [PATCH 2/2] ARM: dts: aspeed: zaius: Add gpio line names
Date: Fri,  6 Mar 2020 11:02:18 -0600	[thread overview]
Message-ID: <20200306170218.79698-2-geissonator@yahoo.com> (raw)
In-Reply-To: <20200306170218.79698-1-geissonator@yahoo.com>

Name the GPIOs to help userspace work with them. The names describe the
functionality the lines provide, not the net or ball name. This makes it
easier to share userspace code across different systems and makes the
use of the lines more obvious.

Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
---
 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 37 +++++++++++++++++++---
 1 file changed, 33 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
index bc60ec291681..4bcc82046362 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -478,32 +478,61 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpioh_unbiased>;
 
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","led-sys-boot-status","led-attention",
+				"led-fault",
+	/*E0-E7*/	"","","","","","","","presence-pcie-e2b",
+	/*F0-F7*/	"","","","","","","","checkstop",
+	/*G0-G7*/	"fsi-clock","fsi-data","","","","","","",
+	/*H0-H7*/	"onewire0","onewire1","onewire2","onewire3","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","iso_u164_en","","fsi-trans","",
+	/*P0-P7*/	"ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
+				"","fsi-mux","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","led-hdd-fault","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
 	line_iso_u146_en {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "iso_u164_en";
 	};
 
 	ncsi_mux_en_n {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
-		line-name = "ncsi_mux_en_n";
 	};
 
 	line_bmc_i2c2_sw_rst_n {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "bmc_i2c2_sw_rst_n";
 	};
 
 	line_bmc_i2c5_sw_rst_n {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "bmc_i2c5_sw_rst_n";
 	};
 };
 
-- 
2.21.0 (Apple Git-122)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
