Re: [RFC PATCH 00/10] Netronix embedded controller driver for Kobo and Tolino ebook readers

From: Andreas Kemnade <andreas@kemnade.info>
To: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
Cc: "Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Heiko Stuebner" <heiko@sntech.de>,
	linux-pwm@vger.kernel.org,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Fabio Estevam" <festevam@gmail.com>,
	linux-rtc@vger.kernel.org,
	"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
	"Sam Ravnborg" <sam@ravnborg.org>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	devicetree@vger.kernel.org,
	"Stephan Gerhold" <stephan@gerhold.net>,
	allen <allen.chen@ite.com.tw>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Lubomir Rintel" <lkundrak@v3.sk>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Lee Jones" <lee.jones@linaro.org>,
	linux-arm-kernel@lists.infradead.org,
	"Alessandro Zummo" <a.zummo@towertech.it>,
	linux-kernel@vger.kernel.org, "Mark Brown" <broonie@kernel.org>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Heiko Stuebner" <heiko.stuebner@theobroma-systems.com>,
	"Josua Mayer" <josua.mayer@jm0.eu>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"David S. Miller" <davem@davemloft.net>
Subject: Re: [RFC PATCH 00/10] Netronix embedded controller driver for Kobo and Tolino ebook readers
Date: Tue, 30 Jun 2020 08:40:51 +0200	[thread overview]
Message-ID: <20200630084051.66feadea@aktux> (raw)
In-Reply-To: <20200620223915.1311485-1-j.neuschaefer@gmx.net>

Hi,

On Sun, 21 Jun 2020 00:39:04 +0200
Jonathan Neuschäfer <j.neuschaefer@gmx.net> wrote:

> Hi,
> 
> This patchset adds basic support for the embedded controller found on
> older ebook reader boards designed by/with the ODM Netronix Inc.[1] and
> sold by Kobo or Tolino, for example the Kobo Aura and the Tolino Shine.
> These drivers are based on the vendor kernel sources, but in order to
> all information in a single place, I documented the register interface
> of the EC on GitHub[4].
> 
> A few things still needs to be ironed out, hence the RFC tag:
>  - The reboot/reset handler in patch 3/10 calls into I2C code, which may
>    sleep, but reboot handlers are apparently not allowed to sleep.
>  - I'm not sure I got the YAML DT bindings right. I have also included
>    the plain text DT bindings for reference.
> 
> 
got a chance to test it on a Tolino Shine 2 HD.
It uses the RTC from the RC5T619 but backlight seems to go via MSP430
EC.

I got this.

[    1.453603] ntxec 0-0043: Netronix embedded controller version f110 detected.
[   10.723638] ntxec-rtc 21a0000.i2c:embedded-controller@43:rtc: registered as rtc0
[   10.775276] ntxec-pwm: probe of 21a0000.i2c:embedded-controller@43:pwm failed with error -5
[   10.850597] ntxec-rtc 21a0000.i2c:embedded-controller@43:rtc: hctosys: unable to read the hardware clock

version number matchess with what the vendor kernel reports. Maybe we
should document which version is running on which devices?

&i2c1 {
        pinctrl-names = "default","sleep";
        pinctrl-0 = <&pinctrl_i2c1>;
        pinctrl-1 = <&pinctrl_i2c1_sleep>;
        status = "okay";

        embedded-controller@43 {
//              pinctrl-names = "default";
//              pinctrl-0 = <&pinctrl_ec>;
                compatible = "netronix,ntxec";
                reg = <0x43>;
                interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>;
                interrupt-controller;
                #interrupt-cells = <1>;

                ec_pwm: pwm {
                        compatible = "netronix,ntxec-pwm";
                        #pwm-cells = <2>;
                };

                rtc {
                        compatible = "netronix,ntxec-rtc";
                };
        };
};

Regards,
Andreas

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel