linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Jones <drjones@redhat.com>
To: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: kernel-team@android.com, kvm@vger.kernel.org,
	Marc Zyngier <maz@kernel.org>, Will Deacon <will@kernel.org>,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] KVM: arm64: Handle CMOs on Read Only memslots
Date: Wed, 17 Feb 2021 11:43:04 +0100	[thread overview]
Message-ID: <20210217104304.ri2zs4pvbulqe3hu@kamzik.brq.redhat.com> (raw)
In-Reply-To: <63fbfcec-b31f-7248-0382-0cad4165424c@arm.com>

On Tue, Feb 16, 2021 at 12:18:31PM +0000, Alexandru Elisei wrote:
> Hi Marc,
> 
> Played with this for a bit to try to understand the problem better, wrote a simple
> MMIO device in kvmtool which maps the memory as a read-only memslot [1] and poked
> it with kvm-unit-tests [2].
> 
> [1] https://gitlab.arm.com/linux-arm/kvmtool-ae/-/tree/mmiodev-wip1
> 
> [2] https://gitlab.arm.com/linux-arm/kvm-unit-tests-ae/-/tree/mmiodev-wip1

Looks like you forgot to add arm/mmiodev.c to your commit.

Thanks,
drew

> 
> On 2/11/21 2:27 PM, Marc Zyngier wrote:
> > It appears that when a guest traps into KVM because it is
> > performing a CMO on a Read Only memslot, our handling of
> > this operation is "slightly suboptimal", as we treat it as
> > an MMIO access without a valid syndrome.
> >
> > The chances that userspace is adequately equiped to deal
> > with such an exception being slim, it would be better to
> > handle it in the kernel.
> >
> > What we need to provide is roughly as follows:
> >
> > (a) if a CMO hits writeable memory, handle it as a normal memory acess
> > (b) if a CMO hits non-memory, skip it
> > (c) if a CMO hits R/O memory, that's where things become fun:
> >   (1) if the CMO is DC IVAC, the architecture says this should result
> >       in a permission fault
> >   (2) if the CMO is DC CIVAC, it should work similarly to (a)
> >
> > We already perform (a) and (b) correctly, but (c) is a total mess.
> > Hence we need to distinguish between IVAC (c.1) and CIVAC (c.2).
> >
> > One way to do it is to treat CMOs generating a translation fault as
> > a *read*, even when they are on a RW memslot. This allows us to
> > further triage things:
> >
> > If they come back with a permission fault, that is because this is
> > a DC IVAC instruction:
> > - inside a RW memslot: no problem, treat it as a write (a)(c.2)
> > - inside a RO memslot: inject a data abort in the guest (c.1)
> >
> > The only drawback is that DC IVAC on a yet unmapped page faults
> > twice: one for the initial translation fault that result in a RO
> > mapping, and once for the permission fault. I think we can live with
> > that.
> >
> > Reported-by: Jianyong Wu <jianyong.wu@arm.com>
> > Signed-off-by: Marc Zyngier <maz@kernel.org>
> > ---
> >
> > Notes:
> >     I have taken the option to inject an abort in the guest when
> >     it issues a DC IVAC on a R/O memslot, but another option would
> >     be to just perform the invalidation ourselves as a DC CIAVAC.
> >     
> >     This would have the advantage of being consistent with what we
> >     do for emulated MMIO.
> >
> >  arch/arm64/kvm/mmu.c | 53 ++++++++++++++++++++++++++++++++++----------
> >  1 file changed, 41 insertions(+), 12 deletions(-)
> >
> > diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
> > index 7d2257cc5438..c7f4388bea45 100644
> > --- a/arch/arm64/kvm/mmu.c
> > +++ b/arch/arm64/kvm/mmu.c
> > @@ -760,7 +760,17 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
> >  	struct kvm_pgtable *pgt;
> >  
> >  	fault_granule = 1UL << ARM64_HW_PGTABLE_LEVEL_SHIFT(fault_level);
> > -	write_fault = kvm_is_write_fault(vcpu);
> > +	/*
> > +	 * Treat translation faults on CMOs as read faults. Should
> > +	 * this further generate a permission fault on a R/O memslot,
> > +	 * it will be caught in kvm_handle_guest_abort(), with
> > +	 * prejudice. Permission faults on non-R/O memslot will be
> > +	 * gracefully handled as writes.
> > +	 */
> > +	if (fault_status == FSC_FAULT && kvm_vcpu_dabt_is_cm(vcpu))
> > +		write_fault = false;
> 
> This means that every DC CIVAC will map the IPA with read permissions in the stage
> 2 tables, regardless of the IPA being already mapped. It's harmless, but a bit
> unexpected.
> 
> > +	else
> > +		write_fault = kvm_is_write_fault(vcpu);
> >  	exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu);
> >  	VM_BUG_ON(write_fault && exec_fault);
> >  
> > @@ -1013,19 +1023,37 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
> >  		}
> >  
> >  		/*
> > -		 * Check for a cache maintenance operation. Since we
> > -		 * ended-up here, we know it is outside of any memory
> > -		 * slot. But we can't find out if that is for a device,
> > -		 * or if the guest is just being stupid. The only thing
> > -		 * we know for sure is that this range cannot be cached.
> > +		 * Check for a cache maintenance operation. Three cases:
> > +		 *
> > +		 * - It is outside of any memory slot. But we can't find out
> > +		 *   if that is for a device, or if the guest is just being
> > +		 *   stupid. The only thing we know for sure is that this
> > +		 *   range cannot be cached.  So let's assume that the guest
> > +		 *   is just being cautious, and skip the instruction.
> > +		 *
> > +		 * - Otherwise, check whether this is a permission fault.
> > +		 *   If so, that's a DC IVAC on a R/O memslot, which is a
> > +		 *   pretty bad idea, and we tell the guest so.
> >  		 *
> > -		 * So let's assume that the guest is just being
> > -		 * cautious, and skip the instruction.
> > +		 * - If this wasn't a permission fault, pass it along for
> > +		 *   further handling (including faulting the page in if it
> > +		 *   was a translation fault).
> >  		 */
> > -		if (kvm_is_error_hva(hva) && kvm_vcpu_dabt_is_cm(vcpu)) {
> > -			kvm_incr_pc(vcpu);
> > -			ret = 1;
> > -			goto out_unlock;
> > +		if (kvm_vcpu_dabt_is_cm(vcpu)) {
> > +			if (kvm_is_error_hva(hva)) {
> > +				kvm_incr_pc(vcpu);
> > +				ret = 1;
> > +				goto out_unlock;
> > +			}
> > +
> > +			if (fault_status == FSC_PERM) {
> > +				/* DC IVAC on a R/O memslot */
> > +				kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
> > +				ret = 1;
> > +				goto out_unlock;
> > +			}
> 
> I don't like the inconsistency. We go from exiting to userspace for both DC
> IVAC/DC CIVAC to mapping the IPA with read permissions for DC CIVAC, but injecting
> a DABT for a DC IVAC. DC IVAC acts just like a DC CIVAC and requires the same
> permissions when executed by a guest, so I'm not sure we should be handling them
> differently.
> 
> Thanks,
> 
> Alex
> 
> > +
> > +			goto handle_access;
> >  		}
> >  
> >  		/*
> > @@ -1039,6 +1067,7 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
> >  		goto out_unlock;
> >  	}
> >  
> > +handle_access:
> >  	/* Userspace should not be able to register out-of-bounds IPAs */
> >  	VM_BUG_ON(fault_ipa >= kvm_phys_size(vcpu->kvm));
> >  
> _______________________________________________
> kvmarm mailing list
> kvmarm@lists.cs.columbia.edu
> https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-02-17 10:47 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-11 14:27 [PATCH] KVM: arm64: Handle CMOs on Read Only memslots Marc Zyngier
2021-02-12 17:12 ` Alexandru Elisei
2021-02-12 18:18   ` Marc Zyngier
2021-02-16 12:19     ` Alexandru Elisei
2021-02-16 12:18 ` Alexandru Elisei
2021-02-17 10:43   ` Andrew Jones [this message]
2021-02-17 11:12     ` Alexandru Elisei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210217104304.ri2zs4pvbulqe3hu@kamzik.brq.redhat.com \
    --to=drjones@redhat.com \
    --cc=alexandru.elisei@arm.com \
    --cc=kernel-team@android.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=maz@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).