linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Clark Wang <xiaoning.wang@nxp.com>
To: aisheng.dong@nxp.com, robh+dt@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, festevam@gmail.com
Cc: kernel@pengutronix.de, linux-imx@nxp.com,
	linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH V2 02/18] i2c: imx-lpi2c: add ipg clk for lpi2c driver
Date: Tue,  6 Apr 2021 19:32:50 +0800	[thread overview]
Message-ID: <20210406113306.2633595-3-xiaoning.wang@nxp.com> (raw)
In-Reply-To: <20210406113306.2633595-1-xiaoning.wang@nxp.com>

The lpi2c IP needs two clks: ipg clk and per clk. The old lpi2c
driver missed ipg clk. This patch adds ipg clk for lpi2c driver.

Signed-off-by: Gao Pan <pandy.gao@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
---
V2 changes:
 - Merge two clocks' prepare funtions to lpi2c_imx_clocks_prepare().
---
 drivers/i2c/busses/i2c-imx-lpi2c.c | 61 +++++++++++++++++++++---------
 1 file changed, 44 insertions(+), 17 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index bbf44ac95021..89b7b0795f51 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -94,7 +94,8 @@ enum lpi2c_imx_pincfg {
 
 struct lpi2c_imx_struct {
 	struct i2c_adapter	adapter;
-	struct clk		*clk;
+	struct clk		*clk_per;
+	struct clk		*clk_ipg;
 	void __iomem		*base;
 	__u8			*rx_buf;
 	__u8			*tx_buf;
@@ -207,7 +208,7 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
 
 	lpi2c_imx_set_mode(lpi2c_imx);
 
-	clk_rate = clk_get_rate(lpi2c_imx->clk);
+	clk_rate = clk_get_rate(lpi2c_imx->clk_per);
 	if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
 		filt = 0;
 	else
@@ -538,6 +539,34 @@ static const struct of_device_id lpi2c_imx_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, lpi2c_imx_of_match);
 
+static int lpi2c_imx_clocks_prepare(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	int ret = 0;
+
+	ret = clk_prepare_enable(lpi2c_imx->clk_per);
+	if (ret) {
+		dev_err(lpi2c_imx->adapter.dev.parent,
+				"can't enable I2C per clock, ret=%d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(lpi2c_imx->clk_ipg);
+	if (ret) {
+		clk_disable_unprepare(lpi2c_imx->clk_per);
+		dev_err(lpi2c_imx->adapter.dev.parent,
+				"can't enable I2C ipg clock, ret=%d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static void lpi2c_imx_clocks_unprepare(struct lpi2c_imx_struct *lpi2c_imx)
+{
+	clk_disable_unprepare(lpi2c_imx->clk_ipg);
+	clk_disable_unprepare(lpi2c_imx->clk_per);
+}
+
 static int lpi2c_imx_probe(struct platform_device *pdev)
 {
 	struct lpi2c_imx_struct *lpi2c_imx;
@@ -563,10 +592,16 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	strlcpy(lpi2c_imx->adapter.name, pdev->name,
 		sizeof(lpi2c_imx->adapter.name));
 
-	lpi2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(lpi2c_imx->clk)) {
+	lpi2c_imx->clk_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(lpi2c_imx->clk_per)) {
 		dev_err(&pdev->dev, "can't get I2C peripheral clock\n");
-		return PTR_ERR(lpi2c_imx->clk);
+		return PTR_ERR(lpi2c_imx->clk_per);
+	}
+
+	lpi2c_imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(lpi2c_imx->clk_ipg)) {
+		dev_err(&pdev->dev, "can't get I2C ipg clock\n");
+		return PTR_ERR(lpi2c_imx->clk_ipg);
 	}
 
 	ret = of_property_read_u32(pdev->dev.of_node,
@@ -584,11 +619,9 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&lpi2c_imx->adapter, lpi2c_imx);
 	platform_set_drvdata(pdev, lpi2c_imx);
 
-	ret = clk_prepare_enable(lpi2c_imx->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "clk enable failed %d\n", ret);
+	ret = lpi2c_imx_clocks_prepare(lpi2c_imx);
+	if (ret)
 		return ret;
-	}
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, I2C_PM_TIMEOUT);
 	pm_runtime_use_autosuspend(&pdev->dev);
@@ -635,7 +668,7 @@ static int __maybe_unused lpi2c_runtime_suspend(struct device *dev)
 {
 	struct lpi2c_imx_struct *lpi2c_imx = dev_get_drvdata(dev);
 
-	clk_disable_unprepare(lpi2c_imx->clk);
+	lpi2c_imx_clocks_unprepare(lpi2c_imx);
 	pinctrl_pm_select_sleep_state(dev);
 
 	return 0;
@@ -644,16 +677,10 @@ static int __maybe_unused lpi2c_runtime_suspend(struct device *dev)
 static int __maybe_unused lpi2c_runtime_resume(struct device *dev)
 {
 	struct lpi2c_imx_struct *lpi2c_imx = dev_get_drvdata(dev);
-	int ret;
 
 	pinctrl_pm_select_default_state(dev);
-	ret = clk_prepare_enable(lpi2c_imx->clk);
-	if (ret) {
-		dev_err(dev, "failed to enable I2C clock, ret=%d\n", ret);
-		return ret;
-	}
 
-	return 0;
+	return lpi2c_imx_clocks_prepare(lpi2c_imx);
 }
 
 static const struct dev_pm_ops lpi2c_pm_ops = {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-04-06 11:36 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-06 11:32 [PATCH V2 00/18] i2c: imx-lpi2c: New features and bug fixes Clark Wang
2021-04-06 11:32 ` [PATCH V2 01/18] i2c: imx-lpi2c: directly retrun ISR when detect a NACK Clark Wang
2021-04-06 11:32 ` Clark Wang [this message]
2021-05-21  6:14   ` [PATCH V2 02/18] i2c: imx-lpi2c: add ipg clk for lpi2c driver Aisheng Dong
2021-04-06 11:32 ` [PATCH V2 03/18] ARM: dts: imx7ulp: add the missing lpi2c ipg clock Clark Wang
2021-05-21  6:17   ` Aisheng Dong
2021-04-06 11:32 ` [PATCH V2 04/18] ARM: dts: imx7ulp: add the missing lpi2c nodes Clark Wang
2021-05-21  6:25   ` Aisheng Dong
2021-04-06 11:32 ` [PATCH V2 05/18] ARM64: dts: imx8: add the missing lpi2c ipg clock Clark Wang
2021-05-11  2:59   ` Shawn Guo
2021-05-21  6:28   ` Aisheng Dong
2021-04-06 11:32 ` [PATCH V2 06/18] ARM64: dts: imx8: change i2c irq number to non-combined Clark Wang
2021-05-21  6:32   ` Aisheng Dong
2021-04-06 11:32 ` [PATCH V2 07/18] i2c: imx-lpi2c: manage irq resource request/release in runtime pm Clark Wang
2021-05-21  6:38   ` Aisheng Dong
2021-04-06 11:32 ` [PATCH V2 08/18] i2c: imx-lpi2c: add debug message when i2c peripheral clk doesn't work Clark Wang
2021-05-21  6:43   ` Aisheng Dong
2021-04-06 11:32 ` [PATCH V2 09/18] i2c: imx-lpi2c: increase PM timeout to avoid operate clk frequently Clark Wang
2021-04-06 11:32 ` [PATCH V2 10/18] i2c: imx-lpi2c: add bus recovery feature Clark Wang
2021-04-07  0:34   ` kernel test robot
2021-05-21  6:44   ` Aisheng Dong
2021-04-06 11:32 ` [PATCH V2 11/18] dt-bindings: i2c: imx-lpi2c: Add bus recovery example Clark Wang
2021-04-06 13:24   ` Rob Herring
2021-05-21  7:02   ` Aisheng Dong
2021-04-06 11:33 ` [PATCH V2 12/18] i2c: imx-lpi2c: fix i2c timing issue Clark Wang
2021-04-06 11:33 ` [PATCH V2 13/18] i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycle Clark Wang
2021-04-06 11:33 ` [PATCH V2 14/18] i2c: imx-lpi2c: add edma mode support Clark Wang
2021-04-06 11:41   ` Clark Wang
2021-04-06 11:33 ` [PATCH V2 15/18] dt-bindings: i2c: imx-lpi2c: Add dma configuration example Clark Wang
2021-04-09 16:33   ` Rob Herring
2021-04-06 11:33 ` [PATCH V2 16/18] ARM: dts: imx7ulp: add dma configurations for lpi2c Clark Wang
2021-04-06 11:33 ` [PATCH V2 17/18] ARM: dts: imx7ulp: add the missing status property of lpi2c5 Clark Wang
2021-04-06 11:33 ` [PATCH V2 18/18] i2c: imx-lpi2c: fix pio mode cannot send 256+ bytes in one frame Clark Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210406113306.2633595-3-xiaoning.wang@nxp.com \
    --to=xiaoning.wang@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).