From: Yong Wu <yong.wu@mediatek.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
"Tomasz Figa" <tfiga@chromium.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<iommu@lists.linux-foundation.org>, <yong.wu@mediatek.com>,
<youlin.pei@mediatek.com>, <anan.sun@mediatek.com>,
<ming-fan.chen@mediatek.com>, <yi.kuo@mediatek.com>,
<anthony.huang@mediatek.com>
Subject: [PATCH 7/9] memory: mtk-smi: mt8195: Add smi support
Date: Wed, 16 Jun 2021 19:43:44 +0800 [thread overview]
Message-ID: <20210616114346.18812-8-yong.wu@mediatek.com> (raw)
In-Reply-To: <20210616114346.18812-1-yong.wu@mediatek.com>
mt8195 has two smi-common. the IP are the same.
only the larbs that connect with the smi-common are different.
thus the bus_sel is different for the two smi-common.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/memory/mtk-smi.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index fa3a14605dc2..8b1bfef47ecd 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -286,6 +286,10 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
.config_port = mtk_smi_larb_config_port_gen2_general,
};
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8195 = {
+ .config_port = mtk_smi_larb_config_port_gen2_general,
+};
+
static const struct of_device_id mtk_smi_larb_of_ids[] = {
{.compatible = "mediatek,mt2701-smi-larb", .data = &mtk_smi_larb_mt2701},
{.compatible = "mediatek,mt2712-smi-larb", .data = &mtk_smi_larb_mt2712},
@@ -294,6 +298,7 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
{.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
{.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
{.compatible = "mediatek,mt8192-smi-larb", .data = &mtk_smi_larb_mt8192},
+ {.compatible = "mediatek,mt8195-smi-larb", .data = &mtk_smi_larb_mt8195},
{}
};
@@ -408,6 +413,21 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
F_MMU1_LARB(6),
};
+static const struct mtk_smi_common_plat mtk_smi_common_mt8195_vdo = {
+ .type = MTK_SMI_GEN2,
+ .bus_sel = F_MMU1_LARB(1) | F_MMU1_LARB(3) | F_MMU1_LARB(5) |
+ F_MMU1_LARB(7),
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt8195_vpp = {
+ .type = MTK_SMI_GEN2,
+ .bus_sel = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(7),
+};
+
+static const struct mtk_smi_common_plat mtk_smi_sub_common_mt8195 = {
+ .type = MTK_SMI_GEN2_SUB_COMM,
+};
+
static const struct of_device_id mtk_smi_common_of_ids[] = {
{.compatible = "mediatek,mt2701-smi-common", .data = &mtk_smi_common_gen1},
{.compatible = "mediatek,mt2712-smi-common", .data = &mtk_smi_common_gen2},
@@ -416,6 +436,9 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
{.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
{.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
{.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192},
+ {.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo},
+ {.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp},
+ {.compatible = "mediatek,mt8195-smi-sub-common", .data = &mtk_smi_sub_common_mt8195},
{}
};
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-16 11:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-16 11:43 [PATCH 0/9] MT8195 SMI support Yong Wu
2021-06-16 11:43 ` [PATCH 1/9] dt-bindings: memory: mediatek: Add mt8195 smi binding Yong Wu
2021-07-08 9:26 ` Krzysztof Kozlowski
2021-07-11 8:24 ` Yong Wu
2021-06-16 11:43 ` [PATCH 2/9] dt-bindings: memory: mediatek: Add mt8195 smi sub common Yong Wu
2021-06-16 11:43 ` [PATCH 3/9] memory: mtk-smi: Use clk_bulk instead of the clk ops Yong Wu
2021-07-08 9:32 ` Krzysztof Kozlowski
2021-07-11 8:29 ` Yong Wu
2021-07-12 6:44 ` Krzysztof Kozlowski
2021-06-16 11:43 ` [PATCH 4/9] memory: mtk-smi: Rename smi_gen to smi_type Yong Wu
2021-07-08 9:34 ` Krzysztof Kozlowski
2021-07-11 8:24 ` Yong Wu
2021-06-16 11:43 ` [PATCH 5/9] memory: mtk-smi: Adjust some code position Yong Wu
2021-06-16 11:43 ` [PATCH 6/9] memory: mtk-smi: Add smi sub common support Yong Wu
2021-07-08 9:47 ` Krzysztof Kozlowski
2021-06-16 11:43 ` Yong Wu [this message]
2021-06-16 11:43 ` [PATCH 8/9] memory: mtk-smi: mt8195: Add initial setting for smi-common Yong Wu
2021-06-16 11:43 ` [PATCH 9/9] memory: mtk-smi: mt8195: Add initial setting for smi-larb Yong Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210616114346.18812-8-yong.wu@mediatek.com \
--to=yong.wu@mediatek.com \
--cc=anan.sun@mediatek.com \
--cc=anthony.huang@mediatek.com \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=krzk@kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=ming-fan.chen@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.org \
--cc=will@kernel.org \
--cc=yi.kuo@mediatek.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).