linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Yong Wu <yong.wu@mediatek.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
	Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
	Robin Murphy <robin.murphy@arm.com>,
	"Tomasz Figa" <tfiga@chromium.org>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<iommu@lists.linux-foundation.org>, <yong.wu@mediatek.com>,
	<youlin.pei@mediatek.com>, <anan.sun@mediatek.com>,
	<ming-fan.chen@mediatek.com>, <yi.kuo@mediatek.com>,
	<anthony.huang@mediatek.com>
Subject: [PATCH 8/9] memory: mtk-smi: mt8195: Add initial setting for smi-common
Date: Wed, 16 Jun 2021 19:43:45 +0800	[thread overview]
Message-ID: <20210616114346.18812-9-yong.wu@mediatek.com> (raw)
In-Reply-To: <20210616114346.18812-1-yong.wu@mediatek.com>

To improve the performance, This patch adds initial setting for smi-common.
some register use some fix setting(suggested from DE).

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 42 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 4 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 8b1bfef47ecd..08b28e96fd8c 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -18,11 +18,19 @@
 #include <dt-bindings/memory/mtk-memory-port.h>
 
 /* SMI COMMON */
+#define SMI_L1LEN			0x100
+
 #define SMI_BUS_SEL			0x220
 #define SMI_BUS_LARB_SHIFT(larbid)	((larbid) << 1)
 /* All are MMU0 defaultly. Only specialize mmu1 here. */
 #define F_MMU1_LARB(larbid)		(0x1 << SMI_BUS_LARB_SHIFT(larbid))
 
+#define SMI_M4U_TH			0x234
+#define SMI_FIFO_TH1			0x238
+#define SMI_FIFO_TH2			0x23c
+#define SMI_DCM				0x300
+#define SMI_DUMMY			0x444
+
 /* SMI LARB */
 
 /* Below are about mmu enable registers, they are different in SoCs */
@@ -58,6 +66,13 @@
 	(_id << 8 | _id << 10 | _id << 12 | _id << 14);	\
 })
 
+#define SMI_COMMON_INIT_REGS_NR		6
+
+struct mtk_smi_reg_pair {
+	unsigned int		offset;
+	u32			value;
+};
+
 enum mtk_smi_type {
 	MTK_SMI_GEN1,
 	MTK_SMI_GEN2,		/* gen2 smi common */
@@ -77,6 +92,8 @@ static const char * const mtk_smi_larb_clocks[] = {
 struct mtk_smi_common_plat {
 	enum mtk_smi_type	type;
 	u32			bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
+
+	const struct mtk_smi_reg_pair	*init;
 };
 
 struct mtk_smi_larb_gen {
@@ -387,6 +404,15 @@ static struct platform_driver mtk_smi_larb_driver = {
 	}
 };
 
+static const struct mtk_smi_reg_pair mtk_smi_common_mt8195_init[SMI_COMMON_INIT_REGS_NR] = {
+	{SMI_L1LEN, 0xb},
+	{SMI_M4U_TH, 0xe100e10},
+	{SMI_FIFO_TH1, 0x506090a},
+	{SMI_FIFO_TH2, 0x506090a},
+	{SMI_DCM, 0x4f1},
+	{SMI_DUMMY, 0x1},
+};
+
 static const struct mtk_smi_common_plat mtk_smi_common_gen1 = {
 	.type     = MTK_SMI_GEN1,
 };
@@ -417,11 +443,13 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8195_vdo = {
 	.type     = MTK_SMI_GEN2,
 	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(3) | F_MMU1_LARB(5) |
 		    F_MMU1_LARB(7),
+	.init     = mtk_smi_common_mt8195_init,
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt8195_vpp = {
 	.type     = MTK_SMI_GEN2,
 	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(7),
+	.init     = mtk_smi_common_mt8195_init,
 };
 
 static const struct mtk_smi_common_plat mtk_smi_sub_common_mt8195 = {
@@ -514,15 +542,21 @@ static int mtk_smi_common_remove(struct platform_device *pdev)
 static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 {
 	struct mtk_smi *common = dev_get_drvdata(dev);
-	u32 bus_sel = common->plat->bus_sel;
-	int ret;
+	const struct mtk_smi_reg_pair *init = common->plat->init;
+	u32 bus_sel = common->plat->bus_sel; /* default is 0 */
+	int ret, i;
 
 	ret = clk_bulk_prepare_enable(common->clk_num, common->clks);
 	if (ret)
 		return ret;
 
-	if (common->plat->type == MTK_SMI_GEN2 && bus_sel)
-		writel(bus_sel, common->base + SMI_BUS_SEL);
+	if (common->plat->type != MTK_SMI_GEN2)
+		return 0;
+
+	for (i = 0; i < SMI_COMMON_INIT_REGS_NR && init && init[i].offset; i++)
+		writel_relaxed(init[i].value, common->base + init[i].offset);
+
+	writel(bus_sel, common->base + SMI_BUS_SEL);
 	return 0;
 }
 
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-06-16 11:56 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-16 11:43 [PATCH 0/9] MT8195 SMI support Yong Wu
2021-06-16 11:43 ` [PATCH 1/9] dt-bindings: memory: mediatek: Add mt8195 smi binding Yong Wu
2021-07-08  9:26   ` Krzysztof Kozlowski
2021-07-11  8:24     ` Yong Wu
2021-06-16 11:43 ` [PATCH 2/9] dt-bindings: memory: mediatek: Add mt8195 smi sub common Yong Wu
2021-06-16 11:43 ` [PATCH 3/9] memory: mtk-smi: Use clk_bulk instead of the clk ops Yong Wu
2021-07-08  9:32   ` Krzysztof Kozlowski
2021-07-11  8:29     ` Yong Wu
2021-07-12  6:44       ` Krzysztof Kozlowski
2021-06-16 11:43 ` [PATCH 4/9] memory: mtk-smi: Rename smi_gen to smi_type Yong Wu
2021-07-08  9:34   ` Krzysztof Kozlowski
2021-07-11  8:24     ` Yong Wu
2021-06-16 11:43 ` [PATCH 5/9] memory: mtk-smi: Adjust some code position Yong Wu
2021-06-16 11:43 ` [PATCH 6/9] memory: mtk-smi: Add smi sub common support Yong Wu
2021-07-08  9:47   ` Krzysztof Kozlowski
2021-06-16 11:43 ` [PATCH 7/9] memory: mtk-smi: mt8195: Add smi support Yong Wu
2021-06-16 11:43 ` Yong Wu [this message]
2021-06-16 11:43 ` [PATCH 9/9] memory: mtk-smi: mt8195: Add initial setting for smi-larb Yong Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210616114346.18812-9-yong.wu@mediatek.com \
    --to=yong.wu@mediatek.com \
    --cc=anan.sun@mediatek.com \
    --cc=anthony.huang@mediatek.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=krzk@kernel.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=ming-fan.chen@mediatek.com \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=tfiga@chromium.org \
    --cc=will@kernel.org \
    --cc=yi.kuo@mediatek.com \
    --cc=youlin.pei@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).