linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Michael Walle <michael@walle.cc>
To: "Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Srinivas Kandagatla" <srinivas.kandagatla@linaro.org>,
	"Shawn Guo" <shawnguo@kernel.org>, "Li Yang" <leoyang.li@nxp.com>,
	"Rafał Miłecki" <rafal@milecki.pl>,
	"Frank Rowand" <frowand.list@gmail.com>
Cc: linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Ahmad Fatoum <a.fatoum@pengutronix.de>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Michael Walle <michael@walle.cc>
Subject: [PATCH v2 18/20] arm64: dts: ls1028a: sl28: get MAC addresses from VPD
Date: Fri,  2 Sep 2022 00:18:55 +0200	[thread overview]
Message-ID: <20220901221857.2600340-19-michael@walle.cc> (raw)
In-Reply-To: <20220901221857.2600340-1-michael@walle.cc>

Now that it is finally possible to get the MAC addresses from the OTP
memory, use it to set the addresses of the network devices.

There are 8 reserved MAC addresses in total per board. Distribute them
as follows:

+----------+------+------+------+------+------+
|          | var1 | var2 | var3 | var4 | kbox |
+----------+------+------+------+------+------+
| enetc #0 |   +0 |      |      |   +0 |   +0 |
| enetc #1 |      |      |   +0 |   +1 |   +1 |
| enetc #2 | rand | rand | rand | rand | rand |
| enetc #3 |      |      |      |      |      |
| felix p0 |      |   +0 |      |      |   +4 |
| felix p1 |      |   +1 |      |      |   +5 |
| felix p2 |      |      |      |      |   +6 |
| felix p3 |      |      |      |      |   +7 |
| felix p4 |      |      |      |      |      |
| felix p5 |      |      |      |      |      |
+----------+------+------+------+------+------+

An empty cell means, the port is not available and thus doesn't need an
ethernet address.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 .../freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts |  8 ++++++++
 .../dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts |  2 ++
 .../dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts |  4 ++++
 .../dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts |  2 ++
 .../boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts | 13 +++++++++++++
 5 files changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 6b575efd84a7..b5c874c145d3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -76,6 +76,8 @@ &mscc_felix_port0 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy0>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 4>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -84,6 +86,8 @@ &mscc_felix_port1 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy1>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 5>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -92,6 +96,8 @@ &mscc_felix_port2 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy2>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 6>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -100,6 +106,8 @@ &mscc_felix_port3 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy3>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 7>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 7cd29ab970d9..1f34c7553459 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -55,5 +55,7 @@ &enetc_port0 {
 &enetc_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index 330e34f933a3..0ed0d2545922 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -48,6 +48,8 @@ &mscc_felix_port0 {
 	managed = "in-band-status";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -56,6 +58,8 @@ &mscc_felix_port1 {
 	managed = "in-band-status";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index 9b5e92fb753e..a4421db3784e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -43,5 +43,7 @@ vddh: vddh-regulator {
 &enetc_port1 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 4ab17b984b03..72429b37a8b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -92,6 +92,8 @@ &enetc_port0 {
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	managed = "in-band-status";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -154,6 +156,17 @@ partition@3e0000 {
 				label = "bootloader environment";
 			};
 		};
+
+		otp-1 {
+			compatible = "kontron,sl28-vpd", "user-otp";
+
+			serial_number: serial-number {
+			};
+
+			base_mac_address: base-mac-address {
+				#nvmem-cell-cells = <1>;
+			};
+		};
 	};
 };
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-09-01 22:33 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-01 22:18 [PATCH v2 00/20] nvmem: core: introduce NVMEM layouts Michael Walle
2022-09-01 22:18 ` [PATCH v2 01/20] net: add helper eth_addr_add() Michael Walle
2022-09-01 23:22   ` Randy Dunlap
2022-09-02  7:27     ` Michael Walle
2022-09-01 22:18 ` [PATCH v2 02/20] of: base: add of_parse_phandle_with_optional_args() Michael Walle
2022-09-01 22:18 ` [PATCH v2 03/20] nvmem: core: add an index parameter to the cell Michael Walle
2022-09-09  8:12   ` Srinivas Kandagatla
2022-09-01 22:18 ` [PATCH v2 04/20] nvmem: core: move struct nvmem_cell_info to nvmem-provider.h Michael Walle
2022-09-01 22:18 ` [PATCH v2 05/20] nvmem: core: drop the removal of the cells in nvmem_add_cells() Michael Walle
2022-09-01 22:18 ` [PATCH v2 06/20] nvmem: core: add nvmem_add_one_cell() Michael Walle
2022-09-09  8:52   ` Srinivas Kandagatla
2022-09-01 22:18 ` [PATCH v2 07/20] nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of() Michael Walle
2022-09-01 22:18 ` [PATCH v2 08/20] nvmem: core: introduce NVMEM layouts Michael Walle
2022-09-01 22:18 ` [PATCH v2 09/20] nvmem: core: add per-cell post processing Michael Walle
2022-09-01 22:18 ` [PATCH v2 10/20] nvmem: core: allow to modify a cell before adding it Michael Walle
2022-09-01 22:18 ` [PATCH v2 11/20] nvmem: imx-ocotp: replace global post processing with layouts Michael Walle
2022-09-07 12:31   ` Michael Walle
2022-09-01 22:18 ` [PATCH v2 12/20] nvmem: cell: drop global cell_post_process Michael Walle
2022-09-01 22:18 ` [PATCH v2 13/20] nvmem: core: drop priv pointer in post process callback Michael Walle
2022-09-09  8:52   ` Srinivas Kandagatla
2022-09-09  8:58     ` Michael Walle
2022-09-09  9:08       ` Srinivas Kandagatla
2022-09-09  9:39         ` Michael Walle
2022-09-01 22:18 ` [PATCH v2 14/20] dt-bindings: mtd: relax the nvmem compatible string Michael Walle
2022-09-08 12:21   ` Krzysztof Kozlowski
2022-09-01 22:18 ` [PATCH v2 15/20] dt-bindings: nvmem: add YAML schema for the sl28 vpd layout Michael Walle
2022-09-08 12:22   ` Krzysztof Kozlowski
2022-09-12 19:20   ` Rob Herring
2022-09-13 14:21     ` Michael Walle
2022-09-22  9:22       ` Miquel Raynal
2022-09-01 22:18 ` [PATCH v2 16/20] nvmem: layouts: add sl28vpd layout Michael Walle
2022-09-01 22:18 ` [PATCH v2 17/20] nvmem: core: export nvmem device size Michael Walle
2022-09-01 22:18 ` Michael Walle [this message]
2022-09-01 22:18 ` [RFC PATCH v2 19/20] nvmem: layouts: rewrite the u-boot-env driver as a NVMEM layout Michael Walle
2022-09-21 10:37   ` Miquel Raynal
2022-09-01 22:18 ` [RFC PATCH v2 20/20] nvmem: layouts: u-boot-env: add device node Michael Walle
2022-09-21  9:58 ` [PATCH v2 00/20] nvmem: core: introduce NVMEM layouts Miquel Raynal
2022-09-22 21:22   ` Srinivas Kandagatla
2022-09-23  8:31     ` Miquel Raynal
2022-09-23 15:47 ` Miquel Raynal
2022-09-23 17:28   ` Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220901221857.2600340-19-michael@walle.cc \
    --to=michael@walle.cc \
    --cc=a.fatoum@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.zabel@pengutronix.de \
    --cc=rafal@milecki.pl \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).