linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Marco Felsch <m.felsch@pengutronix.de>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>, Marek Vasut <marex@denx.de>,
	Luca Ceresoli <luca.ceresoli@bootlin.com>,
	patchwork-lst@pengutronix.de, NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] soc: imx: gpcv2: prepare bus clocks early
Date: Mon, 5 Jun 2023 09:15:20 +0200	[thread overview]
Message-ID: <20230605071520.xjo3kcc7cmpheqwn@pengutronix.de> (raw)
In-Reply-To: <20230602185417.4098937-2-l.stach@pengutronix.de>

Hi Lucas,

thanks for posting.

On 23-06-02, Lucas Stach wrote:
> Prepare the bus clocks during PGC domain driver probe. This avoids a
> potential deadlock when there a clock providers inside the domain,
> as this might end up trying to take the CCF prepare_lock from two
> different contexts, when runtime PM is trying to resume the PGC domain
> for the clock provider. By keeping the bus clocks prepared as long as
> there is a PGC domain driver attached, we don't need to take the
> prepare_lock in the domain power up/down paths.
> 
> We don't want to do this for regular reset clocks, as this might lead
> to some PLLs being kept prepared that could otherwise be shut down.
> For the bus clocks this isn't a concern, as all the bus clocks are
> derived from always-on system PLLs.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

Feel free to add my rb for both patches.

Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>

> ---
>  drivers/soc/imx/gpcv2.c | 41 ++++++++++++++++++++++++++++++++++-------
>  1 file changed, 34 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
> index 706f852e5d87..428e2fd82f26 100644
> --- a/drivers/soc/imx/gpcv2.c
> +++ b/drivers/soc/imx/gpcv2.c
> @@ -337,10 +337,14 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
>  
>  	reset_control_assert(domain->reset);
>  
> -	/* Enable reset clocks for all devices in the domain */
> -	ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
> +	if (!domain->bus_clocks)
> +		/* Enable reset clocks for all devices in the domain */
> +		ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
> +	else
> +		/* Enable bus clocks for this domain */
> +		ret = clk_bulk_enable(domain->num_clks, domain->clks);
>  	if (ret) {
> -		dev_err(domain->dev, "failed to enable reset clocks\n");
> +		dev_err(domain->dev, "failed to enable clocks\n");
>  		goto out_regulator_disable;
>  	}
>  
> @@ -402,7 +406,10 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
>  	return 0;
>  
>  out_clk_disable:
> -	clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +	if (!domain->bus_clocks)
> +		clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +	else
> +		clk_bulk_disable(domain->num_clks, domain->clks);
>  out_regulator_disable:
>  	if (!IS_ERR(domain->regulator))
>  		regulator_disable(domain->regulator);
> @@ -466,8 +473,11 @@ static int imx_pgc_power_down(struct generic_pm_domain *genpd)
>  		}
>  	}
>  
> -	/* Disable reset clocks for all devices in the domain */
> -	clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +	/* Disable bus or reset clocks for all devices in the domain */
> +	if (!domain->bus_clocks)
> +		clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +	else
> +		clk_bulk_disable(domain->num_clks, domain->clks);
>  
>  	if (!IS_ERR(domain->regulator)) {
>  		ret = regulator_disable(domain->regulator);
> @@ -486,6 +496,8 @@ static int imx_pgc_power_down(struct generic_pm_domain *genpd)
>  out_clk_disable:
>  	if (!domain->bus_clocks)
>  		clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +	else
> +		clk_bulk_disable(domain->num_clks, domain->clks);
>  
>  	return ret;
>  }
> @@ -1343,10 +1355,19 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
>  		regmap_update_bits(domain->regmap, domain->regs->map,
>  				   domain->bits.map, domain->bits.map);
>  
> +	if (domain->bus_clocks) {
> +		ret = clk_bulk_prepare(domain->num_clks, domain->clks);
> +		if (ret) {
> +			dev_err(domain->dev,
> +				"Failed to prepare domain's clocks\n");
> +			goto out_domain_unmap;
> +		}
> +	}
> +
>  	ret = pm_genpd_init(&domain->genpd, NULL, true);
>  	if (ret) {
>  		dev_err(domain->dev, "Failed to init power domain\n");
> -		goto out_domain_unmap;
> +		goto out_disable_clocks;
>  	}
>  
>  	if (IS_ENABLED(CONFIG_LOCKDEP) &&
> @@ -1364,6 +1385,9 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
>  
>  out_genpd_remove:
>  	pm_genpd_remove(&domain->genpd);
> +out_disable_clocks:
> +	if (domain->bus_clocks)
> +		clk_bulk_unprepare(domain->num_clks, domain->clks);
>  out_domain_unmap:
>  	if (domain->bits.map)
>  		regmap_update_bits(domain->regmap, domain->regs->map,
> @@ -1380,6 +1404,9 @@ static int imx_pgc_domain_remove(struct platform_device *pdev)
>  	of_genpd_del_provider(domain->dev->of_node);
>  	pm_genpd_remove(&domain->genpd);
>  
> +	if (domain->bus_clocks)
> +		clk_bulk_unprepare(domain->num_clks, domain->clks);
> +
>  	if (domain->bits.map)
>  		regmap_update_bits(domain->regmap, domain->regs->map,
>  				   domain->bits.map, 0);
> -- 
> 2.39.2
> 
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-06-05  7:15 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-02 18:54 [PATCH 1/2] soc: imx: gpcv2: rename keep_clocks to bus_clocks Lucas Stach
2023-06-02 18:54 ` [PATCH 2/2] soc: imx: gpcv2: prepare bus clocks early Lucas Stach
2023-06-02 19:12   ` Marek Vasut
2023-06-02 20:06     ` Lucas Stach
2023-06-05  7:15   ` Marco Felsch [this message]
2023-06-05  8:06   ` Luca Ceresoli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230605071520.xjo3kcc7cmpheqwn@pengutronix.de \
    --to=m.felsch@pengutronix.de \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=luca.ceresoli@bootlin.com \
    --cc=marex@denx.de \
    --cc=patchwork-lst@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).