Re: [PATCH RESEND v3 12/13] ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13

[Gabriel FERNANDEZ <gabriel.fernandez@foss.st.com>]

On 4/21/22 17:23, Alexandre TORGUE wrote:
> Hi Gabriel
>
> On 3/16/22 14:09, gabriel.fernandez@foss.st.com wrote:
>> From: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
>>
>> Enable optee and SCMI clocks support.
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
>> ---
>>   arch/arm/boot/dts/stm32mp131.dtsi | 37 +++++++++++++++++++++++++++++++
>>   1 file changed, 37 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/stm32mp131.dtsi 
>> b/arch/arm/boot/dts/stm32mp131.dtsi
>> index 262de4eeb4ed..78eac53224d4 100644
>> --- a/arch/arm/boot/dts/stm32mp131.dtsi
>> +++ b/arch/arm/boot/dts/stm32mp131.dtsi
>> @@ -27,6 +27,43 @@ arm-pmu {
>>           interrupt-parent = <&intc>;
>>       };
>>   +    scmi_sram: sram@2ffff000 {
>> +        compatible = "mmio-sram";
>> +        reg = <0x2ffff000 0x1000>;
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +        ranges = <0 0x2ffff000 0x1000>;
>> +
>> +        scmi_shm: scmi_shm@0 {
>
> rename to scmi-sram@0 to match with yaml description

ok


>
>> +            compatible = "arm,scmi-shmem";
>> +            reg = <0 0x80>;
>> +        };
>> +    };
>
> Can you move this sram node in Soc{ please?

ok

Thank's Alex


>
>> +
>> +    firmware {
>> +        optee {
>> +            method = "smc";
>> +            compatible = "linaro,optee-tz";
>> +        };
>> +
>> +        scmi: scmi {
>> +            compatible = "linaro,scmi-optee";
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            linaro,optee-channel-id = <0>;
>> +            shmem = <&scmi_shm>;
>> +
>> +            scmi_clk: protocol@14 {
>> +                reg = <0x14>;
>> +                #clock-cells = <1>;
>> +            };
>> +
>> +            scmi_reset: protocol@16 {
>> +                reg = <0x16>;
>> +                #reset-cells = <1>;
>> +            };
>> +        };
>> +    };
>>       clocks {
>>           clk_axi: clk-axi {
>>               #clock-cells = <0>;
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel