From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
To: balbi@kernel.org, gregkh@linuxfoundation.org,
narmstrong@baylibre.com, khilman@baylibre.com,
jbrunet@baylibre.com, martin.blumenstingl@googlemail.com
Cc: linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
kernel-janitors@vger.kernel.org,
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Subject: [PATCH] usb: dwc3: meson-g12a: Disable the regulator in the error handling path of the probe
Date: Fri, 21 May 2021 18:55:50 +0200 [thread overview]
Message-ID: <79df054046224bbb0716a8c5c2082650290eec86.1621616013.git.christophe.jaillet@wanadoo.fr> (raw)
If an error occurs after a successful 'regulator_enable()' call,
'regulator_disable()' must be called.
Fix the error handling path of the probe accordingly.
The remove function doesn't need to be fixed, because the
'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()'
which is called via 'pm_runtime_set_suspended()' in the remove function.
Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
Please review carefully.
I'm not that sure about:
The remove function doesn't need to be fixed, because the
'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()'
which is called via 'pm_runtime_set_suspended()' in the remove function.
This is more a guess than anything else!
---
drivers/usb/dwc3/dwc3-meson-g12a.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index bdf1f98dfad8..804957525130 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -772,13 +772,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
ret = priv->drvdata->usb_init(priv);
if (ret)
- goto err_disable_clks;
+ goto err_disable_regulator;
/* Init PHYs */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_init(priv->phys[i]);
if (ret)
- goto err_disable_clks;
+ goto err_disable_regulator;
}
/* Set PHY Power */
@@ -816,6 +816,10 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
for (i = 0 ; i < PHY_COUNT ; ++i)
phy_exit(priv->phys[i]);
+err_disable_regulator:
+ if (priv->vbus)
+ regulator_disable(priv->vbus);
+
err_disable_clks:
clk_bulk_disable_unprepare(priv->drvdata->num_clks,
priv->drvdata->clks);
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-05-21 17:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-21 16:55 Christophe JAILLET [this message]
2021-05-23 16:03 ` [PATCH] usb: dwc3: meson-g12a: Disable the regulator in the error handling path of the probe Martin Blumenstingl
2021-06-01 8:47 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=79df054046224bbb0716a8c5c2082650290eec86.1621616013.git.christophe.jaillet@wanadoo.fr \
--to=christophe.jaillet@wanadoo.fr \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jbrunet@baylibre.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).