From: Matthias Brugger <matthias.bgg@gmail.com>
To: Peter Chiu <chui-hao.chiu@mediatek.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org, Ryder Lee <ryder.Lee@mediatek.com>,
Evelyn Tsai <evelyn.tsai@mediatek.com>,
Sam Shih <sam.shih@mediatek.com>,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5] arm64: dts: mt7986: add built-in Wi-Fi device nodes
Date: Thu, 1 Sep 2022 16:31:04 +0200 [thread overview]
Message-ID: <aac98d72-863d-eb7b-caab-73bb0fddeb83@gmail.com> (raw)
In-Reply-To: <20220901130552.26234-1-chui-hao.chiu@mediatek.com>
On 01/09/2022 15:05, Peter Chiu wrote:
> This enables built-in 802.11ax Wi-Fi support.
>
> Reviewed-by: Sam Shih <sam.shih@mediatek.com>
> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
>
That won't work without the pinctrl yaml file updated. Please send both together
so that we can review them.
Regards,
Matthias
> ---
> v2: add clocks and clock-names.
> v3: rename wmac to wifi and change underscores to dash in node names.
> v4: rebase to the latest codebase.
> v5: remove useless pins in wf_dbdc_pins node.
> ---
> arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 38 +++++++++++++++++++
> arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 23 +++++++++++
> arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 40 ++++++++++++++++++++
> 3 files changed, 101 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> index 882277a52b69..afe37b702eef 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> @@ -115,6 +115,13 @@
> status = "okay";
> };
>
> +&wifi {
> + status = "okay";
> + pinctrl-names = "default", "dbdc";
> + pinctrl-0 = <&wf_2g_5g_pins>;
> + pinctrl-1 = <&wf_dbdc_pins>;
> +};
> +
> &pio {
> uart1_pins: uart1-pins {
> mux {
> @@ -129,4 +136,35 @@
> groups = "uart2";
> };
> };
> +
> + wf_2g_5g_pins: wf-2g-5g-pins {
> + mux {
> + function = "wifi";
> + groups = "wf_2g", "wf_5g";
> + };
> + conf {
> + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
> + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
> + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
> + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
> + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
> + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
> + "WF1_TOP_CLK", "WF1_TOP_DATA";
> + drive-strength = <4>;
> + };
> + };
> +
> + wf_dbdc_pins: wf-dbdc-pins {
> + mux {
> + function = "wifi";
> + groups = "wf_dbdc";
> + };
> + conf {
> + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
> + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
> + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
> + "WF0_TOP_CLK", "WF0_TOP_DATA";
> + drive-strength = <4>;
> + };
> + };
> };
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> index e3a407d03551..890ded0efc51 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> @@ -7,6 +7,7 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/clock/mt7986-clk.h>
> +#include <dt-bindings/reset/mt7986-resets.h>
>
> / {
> interrupt-parent = <&gic>;
> @@ -70,6 +71,11 @@
> reg = <0 0x43000000 0 0x30000>;
> no-map;
> };
> +
> + wmcpu_emi: wmcpu-reserved@4fc00000 {
> + no-map;
> + reg = <0 0x4fc00000 0 0x00100000>;
> + };
> };
>
> timer {
> @@ -261,6 +267,23 @@
> #size-cells = <0>;
> status = "disabled";
> };
> +
> + wifi: wifi@18000000 {
> + compatible = "mediatek,mt7986-wmac";
> + resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
> + reset-names = "consys";
> + clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
> + <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
> + clock-names = "mcu", "ap2conn";
> + reg = <0 0x18000000 0 0x1000000>,
> + <0 0x10003000 0 0x1000>,
> + <0 0x11d10000 0 0x1000>;
> + interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
> + memory-region = <&wmcpu_emi>;
> + };
> };
>
> };
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> index 0f49d5764ff3..3443013b5971 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> @@ -98,3 +98,43 @@
> };
> };
> };
> +
> +&wifi {
> + status = "okay";
> + pinctrl-names = "default", "dbdc";
> + pinctrl-0 = <&wf_2g_5g_pins>;
> + pinctrl-1 = <&wf_dbdc_pins>;
> +};
> +
> +&pio {
> + wf_2g_5g_pins: wf-2g-5g-pins {
> + mux {
> + function = "wifi";
> + groups = "wf_2g", "wf_5g";
> + };
> + conf {
> + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
> + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
> + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
> + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
> + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
> + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
> + "WF1_TOP_CLK", "WF1_TOP_DATA";
> + drive-strength = <4>;
> + };
> + };
> +
> + wf_dbdc_pins: wf-dbdc-pins {
> + mux {
> + function = "wifi";
> + groups = "wf_dbdc";
> + };
> + conf {
> + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
> + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
> + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
> + "WF0_TOP_CLK", "WF0_TOP_DATA";
> + drive-strength = <4>;
> + };
> + };
> +};
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-01 14:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-01 13:05 [PATCH v5] arm64: dts: mt7986: add built-in Wi-Fi device nodes Peter Chiu
2022-09-01 14:31 ` Matthias Brugger [this message]
2022-09-02 3:08 ` Peter Chiu
2022-09-14 14:17 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aac98d72-863d-eb7b-caab-73bb0fddeb83@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=chui-hao.chiu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=evelyn.tsai@mediatek.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=ryder.Lee@mediatek.com \
--cc=sam.shih@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).