From: Baruch Siach <baruch@tkos.co.il>
To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>
Cc: Baruch Siach <baruch@tkos.co.il>,
linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Kathiravan T <kathirav@codeaurora.org>,
Andy Gross <agross@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] phy: qualcomm: support IPQ60xx USB PHY
Date: Wed, 27 Jan 2021 16:20:26 +0200 [thread overview]
Message-ID: <cover.1611756920.git.baruch@tkos.co.il> (raw)
The short series adds support for USB PHY on IPQ60xx based platforms. Tested
on CP01 board.
The code is forward-ported from downstream codeaurora kernel at
https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/
Baruch Siach (1):
dt-bindings: phy: qcom,qusb2: document ipq6018 compatible
Kathiravan T (2):
phy: qcom-qusb2: add QUSB2 support for IPQ6018
arm64: dts: ipq6018: enable USB2 support
.../bindings/phy/qcom,qusb2-phy.yaml | 1 +
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 8 ++++
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 48 +++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qusb2.c | 44 +++++++++++++++++
4 files changed, 101 insertions(+)
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-01-27 15:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-27 14:20 Baruch Siach [this message]
2021-01-27 14:20 ` [PATCH 1/3] phy: qcom-qusb2: add QUSB2 support for IPQ6018 Baruch Siach
2021-01-27 14:20 ` [PATCH 2/3] dt-bindings: phy: qcom, qusb2: document ipq6018 compatible Baruch Siach
2021-01-27 14:20 ` [PATCH 3/3] arm64: dts: ipq6018: enable USB2 support Baruch Siach
[not found] ` <ebdc1f5c424968a8e1b5463b29f616cf@codeaurora.org>
2021-02-07 9:08 ` Baruch Siach
2021-02-04 7:50 ` [PATCH 0/3] phy: qualcomm: support IPQ60xx USB PHY Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1611756920.git.baruch@tkos.co.il \
--to=baruch@tkos.co.il \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=kathirav@codeaurora.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).