From: Kuogee Hsieh <khsieh@codeaurora.org>
To: robdclark@gmail.com, sean@poorly.run
Cc: abhinavk@codeaurora.org, aravindh@codeaurora.org,
khsieh@codeaurora.org, airlied@linux.ie, daniel@ffwll.ch,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/3] drm/msm/dp: initialize audio_comp when audio starts
Date: Thu, 15 Apr 2021 16:26:41 -0700 [thread overview]
Message-ID: <1618529201-26683-1-git-send-email-khsieh@codeaurora.org> (raw)
In-Reply-To: <161843546014.46595.17704484523118330586@swboyd.mtv.corp.google.com>
Initialize audio_comp when audio starts and wait for audio_comp at
dp_display_disable(). This will take care of both dongle unplugged
and display off (suspend) cases.
Changes in v2:
-- add dp_display_signal_audio_start()
Changes in v3:
-- restore dp_display_handle_plugged_change() at dp_hpd_unplug_handle().
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
---
drivers/gpu/drm/msm/dp/dp_audio.c | 1 +
drivers/gpu/drm/msm/dp/dp_display.c | 11 +++++++++--
drivers/gpu/drm/msm/dp/dp_display.h | 1 +
3 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_audio.c b/drivers/gpu/drm/msm/dp/dp_audio.c
index 82a8673..d7e4a39 100644
--- a/drivers/gpu/drm/msm/dp/dp_audio.c
+++ b/drivers/gpu/drm/msm/dp/dp_audio.c
@@ -527,6 +527,7 @@ int dp_audio_hw_params(struct device *dev,
dp_audio_setup_acr(audio);
dp_audio_safe_to_exit_level(audio);
dp_audio_enable(audio, true);
+ dp_display_signal_audio_start(dp_display);
dp_display->audio_enabled = true;
end:
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 0ba71c7..1784e11 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -178,6 +178,15 @@ static int dp_del_event(struct dp_display_private *dp_priv, u32 event)
return 0;
}
+void dp_display_signal_audio_start(struct msm_dp *dp_display)
+{
+ struct dp_display_private *dp;
+
+ dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+ reinit_completion(&dp->audio_comp);
+}
+
void dp_display_signal_audio_complete(struct msm_dp *dp_display)
{
struct dp_display_private *dp;
@@ -649,7 +658,6 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
dp_add_event(dp, EV_DISCONNECT_PENDING_TIMEOUT, 0, DP_TIMEOUT_5_SECOND);
/* signal the disconnect event early to ensure proper teardown */
- reinit_completion(&dp->audio_comp);
dp_display_handle_plugged_change(g_dp_display, false);
dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK |
@@ -894,7 +902,6 @@ static int dp_display_disable(struct dp_display_private *dp, u32 data)
/* wait only if audio was enabled */
if (dp_display->audio_enabled) {
/* signal the disconnect event */
- reinit_completion(&dp->audio_comp);
dp_display_handle_plugged_change(dp_display, false);
if (!wait_for_completion_timeout(&dp->audio_comp,
HZ * 5))
diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
index 6092ba1..5173c89 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.h
+++ b/drivers/gpu/drm/msm/dp/dp_display.h
@@ -34,6 +34,7 @@ int dp_display_get_modes(struct msm_dp *dp_display,
int dp_display_request_irq(struct msm_dp *dp_display);
bool dp_display_check_video_test(struct msm_dp *dp_display);
int dp_display_get_test_bpp(struct msm_dp *dp_display);
+void dp_display_signal_audio_start(struct msm_dp *dp_display);
void dp_display_signal_audio_complete(struct msm_dp *dp_display);
#endif /* _DP_DISPLAY_H_ */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next parent reply other threads:[~2021-04-15 23:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <161843546014.46595.17704484523118330586@swboyd.mtv.corp.google.com>
2021-04-15 23:26 ` Kuogee Hsieh [this message]
2021-04-16 17:38 [PATCH v3 2/3] drm/msm/dp: initialize audio_comp when audio starts Kuogee Hsieh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1618529201-26683-1-git-send-email-khsieh@codeaurora.org \
--to=khsieh@codeaurora.org \
--cc=abhinavk@codeaurora.org \
--cc=airlied@linux.ie \
--cc=aravindh@codeaurora.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).