From: Rajeev Nandan <rajeevny@codeaurora.org>
To: dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org,
freedreno@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: Rajeev Nandan <rajeevny@codeaurora.org>,
linux-kernel@vger.kernel.org, sean@poorly.run,
robdclark@gmail.com, robh+dt@kernel.org, abhinavk@codeaurora.org,
kalyan_t@codeaurora.org, mkrishn@codeaurora.org,
jonathan@marek.ca
Subject: [v1 2/3] drm/msm/dsi: Add PHY configuration for SC7280
Date: Mon, 31 May 2021 19:03:54 +0530 [thread overview]
Message-ID: <1622468035-8453-3-git-send-email-rajeevny@codeaurora.org> (raw)
In-Reply-To: <1622468035-8453-1-git-send-email-rajeevny@codeaurora.org>
The SC7280 SoC uses the 7nm (V4.1) DSI PHY driver with
different enable|disable regulator loads.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
---
drivers/gpu/drm/msm/Kconfig | 6 +++---
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 ++
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 22 ++++++++++++++++++++++
4 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 10f693e..7c9d9f1 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -114,9 +114,9 @@ config DRM_MSM_DSI_10NM_PHY
Choose this option if DSI PHY on SDM845 is used on the platform.
config DRM_MSM_DSI_7NM_PHY
- bool "Enable DSI 7nm PHY driver in MSM DRM (used by SM8150/SM8250)"
+ bool "Enable DSI 7nm PHY driver in MSM DRM"
depends on DRM_MSM_DSI
default y
help
- Choose this option if DSI PHY on SM8150/SM8250 is used on the
- platform.
+ Choose this option if DSI PHY on SM8150/SM8250/SC7280 is used on
+ the platform.
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index ff7f2ec..2770783 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -593,6 +593,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
.data = &dsi_phy_7nm_cfgs },
{ .compatible = "qcom,dsi-phy-7nm-8150",
.data = &dsi_phy_7nm_8150_cfgs },
+ { .compatible = "qcom,dsi-phy-7nm-7280",
+ .data = &dsi_phy_7nm_7280_cfgs },
#endif
{}
};
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 94a77ac..bc91dc8 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -51,6 +51,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
struct msm_dsi_dphy_timing {
u32 clk_zero;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index e76ce40..6e30d21 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -998,3 +998,25 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs = {
.io_start = { 0xae94400, 0xae96400 },
.num_dsi_phy = 2,
};
+
+const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs = {
+ .has_phy_lane = true,
+ .reg_cfg = {
+ .num = 1,
+ .regs = {
+ {"vdds", 37550, 0},
+ },
+ },
+ .ops = {
+ .enable = dsi_7nm_phy_enable,
+ .disable = dsi_7nm_phy_disable,
+ .pll_init = dsi_pll_7nm_init,
+ .save_pll_state = dsi_7nm_pll_save_state,
+ .restore_pll_state = dsi_7nm_pll_restore_state,
+ },
+ .min_pll_rate = 600000000UL,
+ .max_pll_rate = (5000000000ULL < ULONG_MAX) ? 5000000000ULL : ULONG_MAX,
+ .io_start = { 0xae94400, 0xae96400 },
+ .num_dsi_phy = 2,
+ .quirks = DSI_PHY_7NM_QUIRK_V4_1,
+};
--
2.7.4
next prev parent reply other threads:[~2021-05-31 13:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-31 13:33 [v1 0/3] drm/msm/dsi: Add display DSI support for SC7280 target Rajeev Nandan
2021-05-31 13:33 ` [v1 1/3] dt-bindings: msm/dsi: Add yaml schema for 7nm DSI PHY Rajeev Nandan
2021-06-01 13:32 ` Rob Herring
2021-06-01 20:58 ` Rob Herring
2021-06-02 20:02 ` rajeevny
2021-06-16 5:50 ` rajeevny
2021-06-17 15:07 ` Jonathan Marek
2021-06-18 10:39 ` rajeevny
2021-05-31 13:33 ` Rajeev Nandan [this message]
2021-05-31 17:57 ` [v1 2/3] drm/msm/dsi: Add PHY configuration for SC7280 Dmitry Baryshkov
2021-06-01 12:22 ` rajeevny
2021-05-31 13:33 ` [v1 3/3] drm/msm/dsi: Add DSI support " Rajeev Nandan
2021-05-31 17:57 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1622468035-8453-3-git-send-email-rajeevny@codeaurora.org \
--to=rajeevny@codeaurora.org \
--cc=abhinavk@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jonathan@marek.ca \
--cc=kalyan_t@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkrishn@codeaurora.org \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).