[PATCH v2 5/5] ARM: dts: qcom: Enable NAND + USB for RB3011

[Jonathan McDowell <noodles@earth.li>]

Enable the NAND + USB devices for the MikroTik RB3011 platform now
they're in the main IPQ806x DT.

Signed-off-by: Jonathan McDowell <noodles@earth.li>
---
 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 58 +++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 282b89ce3d45..f7ea2e5dd191 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -216,6 +216,10 @@
 	};
 };
 
+&adm_dma {
+	status = "okay";
+};
+
 &gmac0 {
 	status = "okay";
 
@@ -251,6 +255,39 @@
 	status = "okay";
 };
 
+&hs_phy_1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nandcs@0 {
+		compatible = "qcom,nandcs";
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				label = "RouterBoard NAND 1 Boot";
+				reg = <0x0000000 0x0800000>;
+			};
+
+			main@800000 {
+				label = "RouterBoard NAND 1 Main";
+				reg = <0x0800000 0x7800000>;
+			};
+		};
+	};
+};
+
 &qcom_pinmux {
 	buttons_pins: buttons_pins {
 		mux {
@@ -305,4 +342,25 @@
 			input-disable;
 		};
 	};
+
+	usb1_pwr_en_pins: usb1_pwr_en_pins {
+		mux {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&ss_phy_1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	pinctrl-0 = <&usb1_pwr_en_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
 };
-- 
2.20.1