From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: lgirdwood@gmail.com, broonie@kernel.org, agross@kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v3 2/7] drivers: regulator: qcom_spmi: Refactor get_mode/set_mode
Date: Thu, 13 Jun 2019 08:12:09 -0700 [thread overview]
Message-ID: <20190613151209.GB6792@builder> (raw)
In-Reply-To: <20190613142239.8779-1-jeffrey.l.hugo@gmail.com>
On Thu 13 Jun 07:22 PDT 2019, Jeffrey Hugo wrote:
> spmi_regulator_common_get_mode and spmi_regulator_common_set_mode use
> multi-level ifs which mirror a switch statement. Refactor to use a switch
> statement to make the code flow more clear.
>
> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
> ---
> drivers/regulator/qcom_spmi-regulator.c | 28 ++++++++++++++++---------
> 1 file changed, 18 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
> index fd55438c25d6..1c18fe5969b5 100644
> --- a/drivers/regulator/qcom_spmi-regulator.c
> +++ b/drivers/regulator/qcom_spmi-regulator.c
> @@ -911,13 +911,14 @@ static unsigned int spmi_regulator_common_get_mode(struct regulator_dev *rdev)
>
> spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, ®, 1);
>
> - if (reg & SPMI_COMMON_MODE_HPM_MASK)
> + switch (reg) {
> + case SPMI_COMMON_MODE_HPM_MASK:
> return REGULATOR_MODE_NORMAL;
> -
> - if (reg & SPMI_COMMON_MODE_AUTO_MASK)
> + case SPMI_COMMON_MODE_AUTO_MASK:
> return REGULATOR_MODE_FAST;
> -
> - return REGULATOR_MODE_IDLE;
> + default:
> + return REGULATOR_MODE_IDLE;
> + }
> }
>
> static int
> @@ -925,12 +926,19 @@ spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode)
> {
> struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
> u8 mask = SPMI_COMMON_MODE_HPM_MASK | SPMI_COMMON_MODE_AUTO_MASK;
> - u8 val = 0;
> + u8 val;
>
> - if (mode == REGULATOR_MODE_NORMAL)
> + switch (mode) {
> + case REGULATOR_MODE_NORMAL:
> val = SPMI_COMMON_MODE_HPM_MASK;
> - else if (mode == REGULATOR_MODE_FAST)
> + break;
> + case REGULATOR_MODE_FAST:
> val = SPMI_COMMON_MODE_AUTO_MASK;
> + break;
> + default:
> + val = 0;
> + break;
> + }
For this part:
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
> }
> @@ -1834,9 +1842,9 @@ static int qcom_spmi_regulator_probe(struct platform_device *pdev)
> }
> }
>
> - if (vreg->logical_type == SPMI_REGULATOR_LOGICAL_TYPE_HFS430) {
Squash this into patch 1.
Regards,
Bjorn
> + if (vreg->set_points->count == 1) {
> /* since there is only one range */
> - range = spmi_regulator_find_range(vreg);
> + range = vreg->set_points->range;
> vreg->desc.uV_step = range->step_uV;
> }
>
> --
> 2.17.1
>
next prev parent reply other threads:[~2019-06-13 15:12 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-13 14:21 [PATCH v2 0/7] PM8005 and PMS405 regulator support Jeffrey Hugo
2019-06-13 14:22 ` [PATCH v3 1/7] drivers: regulator: qcom_spmi: enable linear range info Jeffrey Hugo
2019-06-13 15:10 ` Bjorn Andersson
2019-06-13 15:28 ` Jeffrey Hugo
2019-06-13 14:22 ` [PATCH v3 2/7] drivers: regulator: qcom_spmi: Refactor get_mode/set_mode Jeffrey Hugo
2019-06-13 15:12 ` Bjorn Andersson [this message]
2019-06-13 15:24 ` Bjorn Andersson
2019-06-13 15:37 ` Jeffrey Hugo
2019-06-13 14:23 ` [PATCH v3 3/7] dt-bindings: qcom_spmi: Document PM8005 regulators Jeffrey Hugo
2019-06-13 14:23 ` [PATCH v3 4/7] regulator: qcom_spmi: Add support for PM8005 Jeffrey Hugo
2019-06-13 15:25 ` Bjorn Andersson
2019-06-13 14:24 ` [PATCH v3 5/7] arm64: dts: msm8998-mtp: Add pm8005_s1 regulator Jeffrey Hugo
2019-06-13 14:24 ` [PATCH v3 6/7] dt-bindings: qcom_spmi: Document pms405 support Jeffrey Hugo
2019-06-13 15:36 ` Bjorn Andersson
2019-06-13 15:40 ` Jeffrey Hugo
2019-06-13 14:24 ` [PATCH v3 7/7] drivers: regulator: qcom: add PMS405 SPMI regulator Jeffrey Hugo
2019-06-13 15:33 ` Bjorn Andersson
2019-06-13 15:41 ` Jeffrey Hugo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190613151209.GB6792@builder \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jeffrey.l.hugo@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).