Re: [PATCH v2 5/5] usb: xhci: allow multiple firmware versions

[Vinod Koul <vkoul@kernel.org>]

On 21-06-19, 21:46, Christian Lamparter wrote:
> On Friday, June 21, 2019 10:59:13 AM CEST Vinod Koul wrote:
> > Allow multiple firmware file versions in table and load them in
> > increasing order as we find them in the file system.
> > 
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > Cc: Christian Lamparter <chunkeey@googlemail.com>
> > ---
> >  drivers/usb/host/xhci-pci.c | 46 +++++++++++++++++++++++++++++++++++--
> >  1 file changed, 44 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> > index 771948ce3d38..1fb890984d6d 100644
> > --- a/drivers/usb/host/xhci-pci.c
> > +++ b/drivers/usb/host/xhci-pci.c
> > @@ -336,13 +336,19 @@ static const struct renesas_fw_entry {
> >  	 *  - uPD720201 ES 2.0 sample whose revision ID is 2.
> >  	 *  - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
> >  	 *  - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
> > +	 *
> > +	 *  Entry expected_version should be kept in increasing order for a
> > +	 *  chip, so that driver will pick first version and if that fails
> > +	 *  then next one will be picked
> 
> Wouldn't it be better to do that in reverse order and try the latest
> firmware first? And then fall back to the older ones?

Yeah that seems better will update the order.
> 
> >  	 */
> >  	{ "K2013080.mem", 0x0014, 0x02, 0x2013 },
> >  	{ "K2013080.mem", 0x0014, 0x03, 0x2013 },
> > +	{ "K2026090.mem", 0x0014, 0x03, 0x2026 },
> >  	{ "K2013080.mem", 0x0015, 0x02, 0x2013 },
> The uPD720202 (ProductID 0x0015 with rev 0x02) also
> works with the K2026090.mem I found online.
> 
> so,
> 
> +  	{ "K2026090.mem", 0x0015, 0x02, 0x2026 },

Thanks for checking out, I will add this add send updated patch
-- 
~Vinod