From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Leo Yan <leo.yan@linaro.org>,
Alexander Shishkin <alexander.shishkin@linux.intel.com>,
Mike Leach <mike.leach@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
devicetree@vger.kernel.org, David Brown <david.brown@linaro.org>,
Mark Rutland <mark.rutland@arm.com>,
Rajendra Nayak <rnayak@codeaurora.org>,
Vivek Gautam <vivek.gautam@codeaurora.org>,
Sibi Sankar <sibis@codeaurora.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Marc Gonzalez <marc.w.gonzalez@free.fr>
Subject: Re: [PATCHv8 3/5] arm64: dts: qcom: msm8996: Add Coresight support
Date: Wed, 17 Jul 2019 11:00:50 -0600 [thread overview]
Message-ID: <20190717170050.GB4271@xps15> (raw)
In-Reply-To: <2fa725fbc09306f1a95befc62715a708b4c0fad0.1562940244.git.saiprakash.ranjan@codeaurora.org>
On Fri, Jul 12, 2019 at 07:46:25PM +0530, Sai Prakash Ranjan wrote:
> From: Vivek Gautam <vivek.gautam@codeaurora.org>
>
> Enable coresight support by adding device nodes for the
> available source, sinks and channel blocks on msm8996.
>
> This also adds coresight cpu debug nodes.
>
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Acked-By: Suzuki K Poulose <suzuki.poulose@arm.com>
> ---
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 434 ++++++++++++++++++++++++++
> 1 file changed, 434 insertions(+)
>
We've gone trhough 8 iteration of this set and I'm still finding checkpatch
problems, and I'm not referring to lines over 80 characters.
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 96c0a481f454..8968431e772c 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -633,6 +633,440 @@
> reg = <0x300000 0x90000>;
> };
>
> + stm@3002000 {
> + compatible = "arm,coresight-stm", "arm,primecell";
> + reg = <0x3002000 0x1000>,
> + <0x8280000 0x180000>;
> + reg-names = "stm-base", "stm-stimulus-base";
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + out-ports {
> + port {
> + stm_out: endpoint {
> + remote-endpoint =
> + <&funnel0_in>;
> + };
> + };
> + };
> + };
> +
> + tpiu@3020000 {
> + compatible = "arm,coresight-tpiu", "arm,primecell";
> + reg = <0x3020000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + port {
> + tpiu_in: endpoint {
> + remote-endpoint =
> + <&replicator_out1>;
> + };
> + };
> + };
> + };
> +
> + funnel@3021000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x3021000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + port {
> + funnel0_in: endpoint {
> + remote-endpoint =
> + <&stm_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + funnel0_out: endpoint {
> + remote-endpoint =
> + <&merge_funnel_in0>;
> + };
> + };
> + };
> + };
> +
> + funnel@3022000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x3022000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + port {
> + funnel1_in: endpoint {
> + remote-endpoint =
> + <&apss_merge_funnel_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + funnel1_out: endpoint {
> + remote-endpoint =
> + <&merge_funnel_in1>;
> + };
> + };
> + };
> + };
> +
> + funnel@3025000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x3025000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + merge_funnel_in0: endpoint {
> + remote-endpoint =
> + <&funnel0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + merge_funnel_in1: endpoint {
> + remote-endpoint =
> + <&funnel1_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + merge_funnel_out: endpoint {
> + remote-endpoint =
> + <&etf_in>;
> + };
> + };
> + };
> + };
> +
> + replicator@3026000 {
> + compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
> + reg = <0x3026000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + port {
> + replicator_in: endpoint {
> + remote-endpoint =
> + <&etf_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + replicator_out0: endpoint {
> + remote-endpoint =
> + <&etr_in>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + replicator_out1: endpoint {
> + remote-endpoint =
> + <&tpiu_in>;
> + };
> + };
> + };
> + };
> +
> + etf@3027000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0x3027000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + port {
> + etf_in: endpoint {
> + remote-endpoint =
> + <&merge_funnel_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + etf_out: endpoint {
> + remote-endpoint =
> + <&replicator_in>;
> + };
> + };
> + };
> + };
> +
> + etr@3028000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0x3028000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> + arm,scatter-gather;
> +
> + in-ports {
> + port {
> + etr_in: endpoint {
> + remote-endpoint =
> + <&replicator_out0>;
> + };
> + };
> + };
> + };
> +
> + debug@3810000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x3810000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU0>;
> + };
> +
> + etm@3840000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x3840000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU0>;
> +
> + out-ports {
> + port {
> + etm0_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel0_in0>;
> + };
> + };
> + };
> + };
> +
> + debug@3910000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x3910000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU1>;
> + };
> +
> + etm@3940000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x3940000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU1>;
> +
> + out-ports {
> + port {
> + etm1_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel0_in1>;
> + };
> + };
> + };
> + };
> +
> + funnel@39b0000 { /* APSS Funnel 0 */
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x39b0000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + apss_funnel0_in0: endpoint {
> + remote-endpoint = <&etm0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + apss_funnel0_in1: endpoint {
> + remote-endpoint = <&etm1_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + apss_funnel0_out: endpoint {
> + remote-endpoint =
> + <&apss_merge_funnel_in0>;
> + };
> + };
> + };
> + };
> +
> + debug@3a10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x3a10000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU2>;
> + };
> +
> + etm@3a40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x3a40000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU2>;
> +
> + out-ports {
> + port {
> + etm2_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel1_in0>;
> + };
> + };
> + };
> + };
> +
> + debug@3b10000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x3b10000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU3>;
> + };
> +
> + etm@3b40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x3b40000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + cpu = <&CPU3>;
> +
> + out-ports {
> + port {
> + etm3_out: endpoint {
> + remote-endpoint =
> + <&apss_funnel1_in1>;
> + };
> + };
> + };
> + };
> +
> + funnel@3bb0000 { /* APSS Funnel 1 */
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x3bb0000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + apss_funnel1_in0: endpoint {
> + remote-endpoint = <&etm2_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + apss_funnel1_in1: endpoint {
> + remote-endpoint = <&etm3_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + apss_funnel1_out: endpoint {
> + remote-endpoint =
> + <&apss_merge_funnel_in1>;
> + };
> + };
> + };
> + };
> +
> + funnel@3bc0000 {
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0x3bc0000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + apss_merge_funnel_in0: endpoint {
> + remote-endpoint =
> + <&apss_funnel0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + apss_merge_funnel_in1: endpoint {
> + remote-endpoint =
> + <&apss_funnel1_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + apss_merge_funnel_out: endpoint {
> + remote-endpoint =
> + <&funnel1_in>;
> + };
> + };
> + };
> + };
> +
> kryocc: clock-controller@6400000 {
> compatible = "qcom,apcc-msm8996";
> reg = <0x6400000 0x90000>;
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
next prev parent reply other threads:[~2019-07-17 17:00 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-12 14:16 [PATCHv8 0/5] Add coresight support for SDM845, MSM8998 and MSM8996 Sai Prakash Ranjan
2019-07-12 14:16 ` [PATCHv8 1/5] arm64: dts: qcom: sdm845: Add Coresight support Sai Prakash Ranjan
2019-07-12 16:44 ` Suzuki K Poulose
2019-07-12 16:49 ` saiprakash.ranjan
2019-07-19 9:46 ` Suzuki K Poulose
2019-07-19 10:28 ` Sai Prakash Ranjan
2019-07-12 14:16 ` [PATCHv8 2/5] arm64: dts: qcom: msm8998: " Sai Prakash Ranjan
2019-07-18 8:28 ` Suzuki K Poulose
2019-07-18 9:14 ` Sai Prakash Ranjan
2019-07-18 9:37 ` Suzuki K Poulose
2019-07-18 9:53 ` Sai Prakash Ranjan
2019-07-12 14:16 ` [PATCHv8 3/5] arm64: dts: qcom: msm8996: " Sai Prakash Ranjan
2019-07-17 17:00 ` Mathieu Poirier [this message]
2019-07-18 5:47 ` Sai Prakash Ranjan
2019-07-18 15:31 ` Mathieu Poirier
2019-07-18 15:48 ` Bjorn Andersson
2019-07-12 14:16 ` [PATCHv8 4/5] coresight: etm4x: Add ETM PIDs for SDM845 and MSM8996 Sai Prakash Ranjan
2019-07-17 17:40 ` Mathieu Poirier
2019-07-12 14:16 ` [PATCHv8 5/5] coresight: cpu-debug: Add support for Qualcomm Kryo Sai Prakash Ranjan
2019-07-17 16:56 ` Mathieu Poirier
2019-07-21 14:35 ` Leo Yan
2019-07-22 5:48 ` Sai Prakash Ranjan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190717170050.GB4271@xps15 \
--to=mathieu.poirier@linaro.org \
--cc=alexander.shishkin@linux.intel.com \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.w.gonzalez@free.fr \
--cc=mark.rutland@arm.com \
--cc=mike.leach@linaro.org \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sibis@codeaurora.org \
--cc=suzuki.poulose@arm.com \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).