From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
gregkh@linuxfoundation.org, jackp@codeaurora.org,
balbi@kernel.org, bjorn.andersson@linaro.org
Cc: linux-kernel@vger.kernel.org,
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>,
Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Subject: [PATCH v3 04/19] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings
Date: Wed, 22 Jan 2020 18:55:55 +0000 [thread overview]
Message-ID: <20200122185610.131930-5-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20200122185610.131930-1-bryan.odonoghue@linaro.org>
From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Binding description for Qualcomm's Synopsys 1.0.0 SuperSpeed phy
controller embedded in QCS404.
Based on Sriharsha Allenki's <sallenki@codeaurora.org> original
definitions.
[bod: converted to yaml format]
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
.../bindings/phy/intel,lgm-emmc-phy.yaml | 56 --------------
.../devicetree/bindings/phy/qcom,usb-ss.yaml | 75 +++++++++++++++++++
2 files changed, 75 insertions(+), 56 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
deleted file mode 100644
index ff7959c21af0..000000000000
--- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
+++ /dev/null
@@ -1,56 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
-
-maintainers:
- - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
-
-description: |+
- Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon
- node is used to reference the base address of eMMC phy registers.
-
- The eMMC PHY node should be the child of a syscon node with the
- required property:
-
- - compatible: Should be one of the following:
- "intel,lgm-syscon", "syscon"
- - reg:
- maxItems: 1
-
-properties:
- compatible:
- const: intel,lgm-emmc-phy
-
- "#phy-cells":
- const: 0
-
- reg:
- maxItems: 1
-
- clocks:
- maxItems: 1
-
-required:
- - "#phy-cells"
- - compatible
- - reg
- - clocks
-
-examples:
- - |
- sysconf: chiptop@e0200000 {
- compatible = "intel,lgm-syscon", "syscon";
- reg = <0xe0200000 0x100>;
-
- emmc-phy: emmc-phy@a8 {
- compatible = "intel,lgm-emmc-phy";
- reg = <0x00a8 0x10>;
- clocks = <&emmc>;
- #phy-cells = <0>;
- };
- };
-...
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml
new file mode 100644
index 000000000000..3325b2f2e6a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,usb-ss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY
+
+maintainers:
+ - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+ Qualcomm Synopsys 1.0.0 SuperSpeed USB PHY
+
+properties:
+ compatible:
+ enum:
+ - qcom,usb-ssphy
+
+ reg:
+ maxItems: 1
+ description: USB PHY base address and length of the register map.
+
+ "#phy-cells":
+ const: 0
+ description: Should be 0. See phy/phy-bindings.txt for details.
+
+ clocks:
+ maxItems: 3
+ minItems: 3
+ description: phandles for rpmcc clock, PHY AHB clock, SuperSpeed pipe clock.
+
+ clock-names:
+ items:
+ - const: ref
+ - const: phy
+ - const: pipe
+
+ vdd-supply:
+ maxItems: 1
+ description: phandle to the regulator VDD supply node.
+
+ vdda1p8-supply:
+ maxItems: 1
+ description: phandle to the regulator 1.8V supply node.
+
+ resets:
+ items:
+ - description: COM reset
+ - description: PHY reset line
+
+ reset-names:
+ items:
+ - const: com
+ - const: phy
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ usb3_phy: usb3-phy@78000 {
+ compatible = "qcom,usb-ssphy";
+ reg = <0x78000 0x400>;
+ #phy-cells = <0>;
+ clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+ <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "ref", "phy", "pipe";
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "com", "phy";
+ vdd-supply = <&vreg_l3_1p05>;
+ vdda1p8-supply = <&vreg_l5_1p8>;
+ };
+...
--
2.25.0
next prev parent reply other threads:[~2020-01-22 18:57 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-22 18:55 [PATCH v3 00/19] Enable Qualcomm QCS 404 HS/SS USB Bryan O'Donoghue
2020-01-22 18:55 ` [PATCH v3 01/19] dt-bindings: phy: remove qcom-dwc3-usb-phy Bryan O'Donoghue
2020-01-22 18:55 ` [PATCH v3 02/19] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding Bryan O'Donoghue
2020-01-27 17:53 ` Rob Herring
2020-01-22 18:55 ` [PATCH v3 03/19] phy: qualcomm: Add Synopsys Hi-Speed USB PHY driver Bryan O'Donoghue
2020-01-22 18:55 ` Bryan O'Donoghue [this message]
2020-01-27 18:37 ` [PATCH v3 04/19] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings Rob Herring
2020-01-22 18:55 ` [PATCH v3 05/19] phy: qualcomm: usb: Add SuperSpeed PHY driver Bryan O'Donoghue
2020-01-23 8:56 ` Philipp Zabel
2020-01-22 18:55 ` [PATCH v3 06/19] dt-bindings: usb: dwc3: Add a gpio-usb-connector description Bryan O'Donoghue
2020-01-27 18:43 ` Rob Herring
2020-02-04 23:54 ` Bryan O'Donoghue
2020-01-31 13:22 ` Felipe Balbi
2020-01-22 18:55 ` [PATCH v3 07/19] usb: dwc3: Registering a role switch in the DRD code Bryan O'Donoghue
2020-01-31 13:25 ` Felipe Balbi
2020-01-22 18:55 ` [PATCH v3 08/19] dt-bindings: usb: generic: Add role-switch-default-mode binding Bryan O'Donoghue
2020-01-22 18:56 ` [PATCH v3 09/19] usb: dwc3: qcom: Override VBUS when using gpio_usb_connector Bryan O'Donoghue
2020-01-31 13:26 ` Felipe Balbi
2020-01-22 18:56 ` [PATCH v3 10/19] usb: dwc3: Add support for role-switch-default-mode binding Bryan O'Donoghue
2020-01-31 13:29 ` Felipe Balbi
2020-01-31 13:43 ` Bryan O'Donoghue
2020-01-31 13:46 ` Felipe Balbi
2020-01-22 18:56 ` [PATCH v3 11/19] usb: dwc3: Add support for usb-conn-gpio connectors Bryan O'Donoghue
2020-01-22 18:56 ` [PATCH v3 12/19] arm64: dts: qcom: qcs404: Add USB devices and PHYs Bryan O'Donoghue
2020-01-22 18:56 ` [PATCH v3 13/19] arm64: dts: qcom: qcs404-evb: Define VBUS detect pin Bryan O'Donoghue
2020-01-22 18:56 ` [PATCH v3 14/19] arm64: dts: qcom: qcs404-evb: Define VBUS boost pin Bryan O'Donoghue
2020-01-22 18:56 ` [PATCH v3 15/19] arm64: dts: qcom: qcs404-evb: Define USB ID pin Bryan O'Donoghue
2020-01-22 18:56 ` [PATCH v3 16/19] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator Bryan O'Donoghue
2020-01-22 18:56 ` [PATCH v3 17/19] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage Bryan O'Donoghue
2020-01-22 18:56 ` [PATCH v3 18/19] arm64: dts: qcom: qcs404-evb: Enable secondary USB controller Bryan O'Donoghue
2020-01-22 18:56 ` [PATCH v3 19/19] arm64: dts: qcom: qcs404-evb: Enable primary " Bryan O'Donoghue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200122185610.131930-5-bryan.odonoghue@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=balbi@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jackp@codeaurora.org \
--cc=jorge.ramirez-ortiz@linaro.org \
--cc=jorge.ramirez.ortiz@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).