linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Douglas Anderson <dianders@chromium.org>,
	Rajendra Nayak <rnayak@codeaurora.org>,
	Stephen Boyd <swboyd@chromium.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-arm-msm@vger.kernel.org
Subject: [PATCH AUTOSEL 5.5 298/542] soc: qcom: rpmhpd: Set 'active_only' for active only power domains
Date: Fri, 14 Feb 2020 10:44:50 -0500	[thread overview]
Message-ID: <20200214154854.6746-298-sashal@kernel.org> (raw)
In-Reply-To: <20200214154854.6746-1-sashal@kernel.org>

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 5d0d4d42bed0090d3139e7c5ca1587d76d48add6 ]

The 'active_only' attribute was accidentally never set to true for any
power domains meaning that all the code handling this attribute was
dead.

NOTE that the RPM power domain code (as opposed to the RPMh one) gets
this right.

Acked-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20190214173633.211000-1-dianders@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/rpmhpd.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index 5741ec3fa814c..51850cc68b701 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -93,6 +93,7 @@ static struct rpmhpd sdm845_mx = {
 
 static struct rpmhpd sdm845_mx_ao = {
 	.pd = { .name = "mx_ao", },
+	.active_only = true,
 	.peer = &sdm845_mx,
 	.res_name = "mx.lvl",
 };
@@ -107,6 +108,7 @@ static struct rpmhpd sdm845_cx = {
 
 static struct rpmhpd sdm845_cx_ao = {
 	.pd = { .name = "cx_ao", },
+	.active_only = true,
 	.peer = &sdm845_cx,
 	.parent = &sdm845_mx_ao.pd,
 	.res_name = "cx.lvl",
-- 
2.20.1


  parent reply	other threads:[~2020-02-14 18:05 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214154854.6746-1-sashal@kernel.org>
2020-02-14 15:40 ` [PATCH AUTOSEL 5.5 038/542] drm/msm/adreno: fix zap vs no-zap handling Sasha Levin
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 095/542] backlight: qcom-wled: Fix unsigned comparison to zero Sasha Levin
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 100/542] pinctrl: qcom: Don't lock around irq_set_irq_wake() Sasha Levin
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 114/542] watchdog: qcom: Use platform_get_irq_optional() for bark irq Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 129/542] clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq() Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 130/542] clk: qcom: rcg2: Don't crash if our parent can't be found; return an error Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 189/542] arm64: dts: qcom: msm8998: Fix tcsr syscon size Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 192/542] arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 236/542] clk: qcom: smd: Add missing bimc clock Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 248/542] remoteproc: q6v5-mss: Remove mem clk from the active pool Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 251/542] arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 257/542] clk: qcom: Add missing msm8998 gcc_bimc_gfx_clk Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 297/542] arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3 Sasha Levin
2020-02-14 15:44 ` Sasha Levin [this message]
2020-02-14 15:46 ` [PATCH AUTOSEL 5.5 375/542] scsi: ufs: pass device information to apply_dev_quirks Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214154854.6746-298-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rnayak@codeaurora.org \
    --cc=stable@vger.kernel.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).