linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: balbi@kernel.org, gregkh@linuxfoundation.org, linux-usb@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	bjorn.andersson@linaro.org, jackp@codeaurora.org,
	robh@kernel.org, Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	Andy Gross <agross@kernel.org>, Lee Jones <lee.jones@linaro.org>,
	Philipp Zabel <p.zabel@pengutronix.de>
Subject: [PATCH 7/7] usb: dwc3: qcom: Enable gpio-usb-conn based role-switching
Date: Wed, 11 Mar 2020 19:15:01 +0000	[thread overview]
Message-ID: <20200311191501.8165-8-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20200311191501.8165-1-bryan.odonoghue@linaro.org>

This patch adds the ability to receive a notification from the DRD code for
role-switch events and in doing so it introduces a disjunction between
gpio-usb-conn or extcon mode.

This is what we want to do, since the two methods are mutually exclusive.

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 6f4b2b3cffce..f6a7ede5953e 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -571,6 +571,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	struct device		*dev = &pdev->dev;
 	struct dwc3_qcom	*qcom;
 	struct resource		*res, *parent_res = NULL;
+	struct dwc3		*dwc;
 	int			ret, i;
 	bool			ignore_pipe_clk;
 
@@ -669,8 +670,16 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	if (qcom->mode == USB_DR_MODE_PERIPHERAL)
 		dwc3_qcom_vbus_overrride_enable(qcom, true);
 
-	/* register extcon to override sw_vbus on Vbus change later */
-	ret = dwc3_qcom_register_extcon(qcom);
+	if (dwc3_qcom_find_gpio_usb_connector(qcom->dwc3)) {
+		/* Using gpio-usb-conn register a notifier for VBUS */
+		dwc = platform_get_drvdata(qcom->dwc3);
+		qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier;
+		ret = dwc3_role_switch_notifier_register(dwc, &qcom->vbus_nb);
+	} else {
+		/* register extcon to override sw_vbus on Vbus change later */
+		ret = dwc3_qcom_register_extcon(qcom);
+	}
+
 	if (ret)
 		goto depopulate;
 
@@ -702,8 +711,11 @@ static int dwc3_qcom_remove(struct platform_device *pdev)
 {
 	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
 	struct device *dev = &pdev->dev;
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
 	int i;
 
+	dwc3_role_switch_notifier_unregister(dwc, &qcom->vbus_nb);
+
 	of_platform_depopulate(dev);
 
 	for (i = qcom->num_clocks - 1; i >= 0; i--) {
-- 
2.25.1


  parent reply	other threads:[~2020-03-11 19:16 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-11 19:14 [PATCH 0/7] DWC3/Qualcomm connector based role-switching Bryan O'Donoghue
2020-03-11 19:14 ` [PATCH 1/7] usb: dwc3: Registering a role switch in the DRD code Bryan O'Donoghue
2020-03-11 19:14 ` [PATCH 2/7] dt-bindings: usb: dwc3: Add a gpio-usb-connector example Bryan O'Donoghue
2020-03-19  1:08   ` Stephen Boyd
2020-03-19 15:22     ` Bryan O'Donoghue
2020-03-19 16:40       ` Stephen Boyd
2020-03-19 18:03         ` Bryan O'Donoghue
2020-03-19 20:30           ` Stephen Boyd
2020-03-11 19:14 ` [PATCH 3/7] dt-bindings: usb: dwc3: Add a usb-role-switch to the example Bryan O'Donoghue
2020-03-11 19:14 ` [PATCH 4/7] usb: dwc3: qcom: Add support for usb-conn-gpio connectors Bryan O'Donoghue
2020-03-11 19:14 ` [PATCH 5/7] usb: dwc3: " Bryan O'Donoghue
2020-03-11 19:15 ` [PATCH 6/7] usb: dwc3: Add support for a role-switch notifier Bryan O'Donoghue
2020-07-23  8:13   ` Vincent Whitchurch
2020-03-11 19:15 ` Bryan O'Donoghue [this message]
2020-03-17  6:31   ` [PATCH 7/7] usb: dwc3: qcom: Enable gpio-usb-conn based role-switching Bjorn Andersson
2020-03-17 15:22     ` Bryan O'Donoghue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200311191501.8165-8-bryan.odonoghue@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=agross@kernel.org \
    --cc=balbi@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jackp@codeaurora.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).