From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: jassisinghbrar@gmail.com, robh+dt@kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 1/3] dt-bindings: mailbox: Add devicetree binding for Qcom IPCC
Date: Tue, 12 May 2020 15:07:04 -0700 [thread overview]
Message-ID: <20200512220704.GM2165@builder.lan> (raw)
In-Reply-To: <20200508182703.29021-2-manivannan.sadhasivam@linaro.org>
On Fri 08 May 11:27 PDT 2020, Manivannan Sadhasivam wrote:
> Add devicetree YAML binding for Qualcomm Inter-Processor Communication
> Controller (IPCC) block.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> .../bindings/mailbox/qcom-ipcc.yaml | 77 +++++++++++++++++++
> include/dt-bindings/mailbox/qcom-ipcc.h | 33 ++++++++
> 2 files changed, 110 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
> create mode 100644 include/dt-bindings/mailbox/qcom-ipcc.h
>
> diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
> new file mode 100644
> index 000000000000..62e7bc8ceb0b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mailbox/qcom-ipcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller
> +
> +maintainers:
> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> +
> +description:
> + The Inter-Processor Communication Controller (IPCC) is a centralized hardware
> + to route interrupts across various subsystems. It involves a three-level
> + addressing scheme called protocol, client and signal. For example, consider an
> + entity on the Application Processor Subsystem (APSS) that wants to listen to
> + Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such
> + a case, the client would be Modem (client-id is 2) and the signal would be
> + SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC)
> + protocol (protocol-id is 0). Refer include/dt-bindings/mailbox/qcom-ipcc.h
> + for the list of such IDs.
> +
> +properties:
> + compatible:
> + const: "qcom,ipcc"
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 3
> + description:
> + The first cell is the client-id, the second cell is the signal-id and the
> + third cell is the interrupt type.
> +
> + "#mbox-cells":
> + const: 2
> + description:
> + The first cell is the client-id, and the second cell is the signal-id.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-controller
> + - "#interrupt-cells"
> + - "#mbox-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/mailbox/qcom-ipcc.h>
> +
> + mailbox: qcom,ipcc@408000 {
> + compatible = "qcom,ipcc";
> + reg = <0x408000 0x1000>;
> + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #mbox-cells = <2>;
> + };
> +
> + smp2p-modem {
> + compatible = "qcom,smp2p";
> + interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS
> + IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
> +
> + /* Other SMP2P fields */
> + };
> diff --git a/include/dt-bindings/mailbox/qcom-ipcc.h b/include/dt-bindings/mailbox/qcom-ipcc.h
> new file mode 100644
> index 000000000000..b8c04f6df57c
> --- /dev/null
> +++ b/include/dt-bindings/mailbox/qcom-ipcc.h
> @@ -0,0 +1,33 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef __DT_BINDINGS_MAILBOX_IPCC_H
> +#define __DT_BINDINGS_MAILBOX_IPCC_H
> +
> +/* Signal IDs for MPROC protocol */
> +#define IPCC_MPROC_SIGNAL_GLINK_QMP 0
> +#define IPCC_MPROC_SIGNAL_SMP2P 2
> +#define IPCC_MPROC_SIGNAL_PING 3
> +
> +/* Client IDs */
> +#define IPCC_CLIENT_AOP 0
> +#define IPCC_CLIENT_TZ 1
> +#define IPCC_CLIENT_MPSS 2
> +#define IPCC_CLIENT_LPASS 3
> +#define IPCC_CLIENT_SLPI 4
> +#define IPCC_CLIENT_SDC 5
> +#define IPCC_CLIENT_CDSP 6
> +#define IPCC_CLIENT_NPU 7
> +#define IPCC_CLIENT_APSS 8
> +#define IPCC_CLIENT_GPU 9
> +#define IPCC_CLIENT_CVP 10
> +#define IPCC_CLIENT_CAM 11
> +#define IPCC_CLIENT_VPU 12
> +#define IPCC_CLIENT_PCIE0 13
> +#define IPCC_CLIENT_PCIE1 14
> +#define IPCC_CLIENT_PCIE2 15
> +#define IPCC_CLIENT_SPSS 16
> +
> +#endif
> --
> 2.17.1
>
next prev parent reply other threads:[~2020-05-12 22:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 18:27 [PATCH v2 0/3] Add Qualcomm IPCC driver support Manivannan Sadhasivam
2020-05-08 18:27 ` [PATCH v2 1/3] dt-bindings: mailbox: Add devicetree binding for Qcom IPCC Manivannan Sadhasivam
2020-05-12 22:07 ` Bjorn Andersson [this message]
2020-05-18 18:16 ` Rob Herring
2020-05-08 18:27 ` [PATCH v2 2/3] mailbox: Add support for Qualcomm IPCC Manivannan Sadhasivam
2020-05-12 22:12 ` Bjorn Andersson
2020-05-08 18:27 ` [PATCH v2 3/3] MAINTAINERS: Add entry for Qualcomm IPCC driver Manivannan Sadhasivam
2020-05-12 22:13 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200512220704.GM2165@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jassisinghbrar@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).