From: Stephan Gerhold <stephan@gerhold.net>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
Andy Gross <agross@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
phone-devel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
Stephan Gerhold <stephan@gerhold.net>
Subject: [PATCH 3/5] arm64: dts: qcom: msm8916-huawei-g7: Add sensors
Date: Fri, 14 May 2021 12:43:26 +0200 [thread overview]
Message-ID: <20210514104328.18756-3-stephan@gerhold.net> (raw)
In-Reply-To: <20210514104328.18756-1-stephan@gerhold.net>
The Huawei Ascend G7 has 3 sensors, all supported by existing kernel drivers:
1. Kionix KX023-1025 accelerometer (kxcjk-1023)
2. Asahi Kasei AK09911 magnetometer (ak8975)
3. Avago APDS9930 proximity/light sensor (tsl2772)
Add them to the huawei-g7 device tree.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
.../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 76 +++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index f928179f9ded..3b558dc9e90f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -85,6 +85,58 @@ usb_id: usb-id {
};
};
+&blsp_i2c2 {
+ status = "okay";
+
+ magnetometer@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+
+ vdd-supply = <&pm8916_l17>;
+ vid-supply = <&pm8916_l6>;
+
+ reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mag_reset_default>;
+ };
+
+ accelerometer@1e {
+ compatible = "kionix,kx023-1025";
+ reg = <0x1e>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_irq_default>;
+
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+
+ proximity@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+
+ led-max-microamp = <100000>;
+ amstaos,proximity-diodes = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&prox_irq_default>;
+ };
+};
+
&blsp_i2c5 {
status = "okay";
@@ -278,6 +330,14 @@ l18 {
};
&msmgpio {
+ accel_irq_default: accel-irq-default {
+ pins = "gpio115";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
gpio_keys_default: gpio-keys-default {
pins = "gpio107";
function = "gpio";
@@ -294,6 +354,22 @@ gpio_leds_default: gpio-leds-default {
bias-disable;
};
+ mag_reset_default: mag-reset-default {
+ pins = "gpio36";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ prox_irq_default: prox-irq-default {
+ pins = "gpio113";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
sdhc2_cd_default: sdhc2-cd-default {
pins = "gpio56";
function = "gpio";
--
2.31.1
next prev parent reply other threads:[~2021-05-14 10:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-14 10:43 [PATCH 1/5] arm64: dts: qcom: msm8916: Add device tree for Huawei Ascend G7 Stephan Gerhold
2021-05-14 10:43 ` [PATCH 2/5] arm64: dts: qcom: msm8916-huawei-g7: Add touchscreen Stephan Gerhold
2021-05-14 10:43 ` Stephan Gerhold [this message]
2021-05-14 10:43 ` [PATCH 4/5] arm64: dts: qcom: msm8916-huawei-g7: Add display regulator Stephan Gerhold
2021-05-14 10:43 ` [PATCH 5/5] arm64: dts: qcom: msm8916-huawei-g7: Add NFC Stephan Gerhold
2021-06-10 15:32 ` [PATCH 1/5] arm64: dts: qcom: msm8916: Add device tree for Huawei Ascend G7 Bjorn Andersson
2021-06-10 15:45 ` Stephan Gerhold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210514104328.18756-3-stephan@gerhold.net \
--to=stephan@gerhold.net \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).