linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
	plai@codeaurora.org, bgoswami@codeaurora.org, perex@perex.cz,
	tiwai@suse.com, srinivas.kandagatla@linaro.org,
	rohitkr@codeaurora.org, linux-arm-msm@vger.kernel.org,
	alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, swboyd@chromium.org,
	judyhsiao@chromium.org
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Subject: [PATCH v2] ASoC: qcom: Fix for DMA interrupt clear reg overwriting
Date: Sat,  5 Jun 2021 17:08:09 +0530	[thread overview]
Message-ID: <20210605113809.26584-1-srivasam@codeaurora.org> (raw)

The DMA interrupt clear register overwritten during
simultaneous playback and capture in lpass platform
interrupt handler. It's causing playback or capture stuck
in similtaneous plaback on speaker and capture on dmic test.
Update appropriate reg fields of corresponding channel instead
of entire register write.

Fixes: commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")

Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
---
 sound/soc/qcom/lpass-platform.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index 0df9481ea4c6..f220a2739ac3 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,
 			return -EINVAL;
 		}
 
-		ret = regmap_write(map, reg_irqclr, val_irqclr);
+		ret = regmap_update_bits(map, reg_irqclr, val_irqclr, val_irqclr);
 		if (ret) {
 			dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", ret);
 			return ret;
@@ -650,7 +650,7 @@ static irqreturn_t lpass_dma_interrupt_handler(
 	struct lpass_variant *v = drvdata->variant;
 	irqreturn_t ret = IRQ_NONE;
 	int rv;
-	unsigned int reg = 0, val = 0;
+	unsigned int reg, val, val_clr, val_mask;
 	struct regmap *map;
 	unsigned int dai_id = cpu_dai->driver->id;
 
@@ -676,8 +676,9 @@ static irqreturn_t lpass_dma_interrupt_handler(
 	return -EINVAL;
 	}
 	if (interrupts & LPAIF_IRQ_PER(chan)) {
-
-		rv = regmap_write(map, reg, LPAIF_IRQ_PER(chan) | val);
+		val_clr = LPAIF_IRQ_PER(chan) | val;
+		val_mask = LPAIF_IRQ_ALL(chan);
+		rv = regmap_update_bits(map, reg, val_mask, val_clr);
 		if (rv) {
 			dev_err(soc_runtime->dev,
 				"error writing to irqclear reg: %d\n", rv);
@@ -688,7 +689,9 @@ static irqreturn_t lpass_dma_interrupt_handler(
 	}
 
 	if (interrupts & LPAIF_IRQ_XRUN(chan)) {
-		rv = regmap_write(map, reg, LPAIF_IRQ_XRUN(chan) | val);
+		val_clr = (LPAIF_IRQ_XRUN(chan) | val);
+		val_mask = LPAIF_IRQ_ALL(chan);
+		rv = regmap_update_bits(map, reg, val_mask, val_clr);
 		if (rv) {
 			dev_err(soc_runtime->dev,
 				"error writing to irqclear reg: %d\n", rv);
@@ -700,7 +703,9 @@ static irqreturn_t lpass_dma_interrupt_handler(
 	}
 
 	if (interrupts & LPAIF_IRQ_ERR(chan)) {
-		rv = regmap_write(map, reg, LPAIF_IRQ_ERR(chan) | val);
+		val_clr = (LPAIF_IRQ_ERR(chan) | val);
+		val_mask = LPAIF_IRQ_ALL(chan);
+		rv = regmap_update_bits(map, reg, val_mask, val_clr);
 		if (rv) {
 			dev_err(soc_runtime->dev,
 				"error writing to irqclear reg: %d\n", rv);
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


             reply	other threads:[~2021-06-05 11:38 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-05 11:38 Srinivasa Rao Mandadapu [this message]
2021-06-07 14:50 ` [PATCH v2] ASoC: qcom: Fix for DMA interrupt clear reg overwriting Srinivas Kandagatla
2021-06-07 15:04   ` Srinivasa Rao Mandadapu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210605113809.26584-1-srivasam@codeaurora.org \
    --to=srivasam@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bgoswami@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=judyhsiao@chromium.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=plai@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=rohitkr@codeaurora.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=swboyd@chromium.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).