From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
To: bjorn.andersson@linaro.org
Cc: agross@kernel.org, robh+dt@kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, konrad.dybcio@somainline.org,
marijn.suijten@somainline.org, martin.botka@somainline.org,
~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, paul.bouchara@somainline.org,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@somainline.org>
Subject: [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support
Date: Fri, 3 Sep 2021 20:09:19 +0200 [thread overview]
Message-ID: <20210903180924.1006044-2-angelogioacchino.delregno@somainline.org> (raw)
In-Reply-To: <20210903180924.1006044-1-angelogioacchino.delregno@somainline.org>
All of the devices in the Sony Yoshino platform are using a Synaptics
RMI4-compatible touch IC with identical pins and supplies: enable the
I2C-5 bus and add the rmi4-i2c node along with the required pin
configurations.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
---
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index b07cbc759807..2fe53e4675d5 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -30,6 +30,15 @@ board_vbat: vbat-regulator {
regulator-boot-on;
};
+ touch_vddio_vreg: touch-vddio-vreg {
+ compatible = "regulator-fixed";
+ regulator-name = "touch_vddio_vreg";
+ startup-delay-us = <10000>;
+ gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_vddio_en>;
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -134,6 +143,42 @@ ramoops@ffc00000 {
};
};
+&blsp1_i2c5 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ touchscreen: synaptics-rmi4-i2c@2c {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_n>;
+
+ vdd-supply = <&vreg_l28_3p0>;
+ vio-supply = <&touch_vddio_vreg>;
+
+ syna,reset-delay-ms = <220>;
+ syna,startup-delay-ms = <1000>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_i2c5_sleep {
+ bias-disable;
+};
+
&blsp2_uart1 {
status = "okay";
};
@@ -448,6 +493,21 @@ hall_sensor0_default: acc-cover-open {
drive-strength = <2>;
input-enable;
};
+
+ ts_int_n: ts-int-n {
+ pins = "gpio125";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ ts_vddio_en: ts-vddio-en-default {
+ pins = "gpio133";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ output-low;
+ };
};
/*
--
2.32.0
next prev parent reply other threads:[~2021-09-03 18:09 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-03 18:09 [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform AngeloGioacchino Del Regno
2021-09-03 18:09 ` AngeloGioacchino Del Regno [this message]
2021-09-07 13:41 ` [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support Bjorn Andersson
2021-09-09 11:25 ` AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth AngeloGioacchino Del Regno
2021-09-07 13:42 ` Bjorn Andersson
2021-09-09 13:19 ` Dmitry Baryshkov
2021-09-09 18:03 ` AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 4/7] arm64: dts: qcom: msm8998-xperia: Add support for gpio vibrator AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 5/7] arm64: dts: qcom: msm8998-xperia: Configure display boost regulators AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 6/7] arm64: dts: qcom: msm8998-xperia: Add camera regulators AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 7/7] arm64: dts: qcom: msm8998-xperia: Add audio clock and its pin AngeloGioacchino Del Regno
2021-09-07 13:47 ` Bjorn Andersson
2021-09-09 10:57 ` AngeloGioacchino Del Regno
2021-09-07 11:40 ` [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform kernel test robot
2021-09-07 13:04 ` Bjorn Andersson
2021-09-09 10:40 ` AngeloGioacchino Del Regno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210903180924.1006044-2-angelogioacchino.delregno@somainline.org \
--to=angelogioacchino.delregno@somainline.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=martin.botka@somainline.org \
--cc=paul.bouchara@somainline.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).