From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Marijn Suijten <marijn.suijten@somainline.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v4 10/12] arm64: dts: qcom: sdm660: move SDHC2 card detect pinconf to board files
Date: Sat, 14 May 2022 17:10:39 +0300 [thread overview]
Message-ID: <20220514141041.3158521-11-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220514141041.3158521-1-dmitry.baryshkov@linaro.org>
This results in dts duplication, but per mutual agreement card detect
pin configuration belongs to the board files. Move it from the SoC
dtsi to the board DT files.
Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 16 ++++++++++++++++
arch/arm64/boot/dts/qcom/sdm630.dtsi | 12 ------------
.../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 16 ++++++++++++++++
3 files changed, 32 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 00baacf28c63..ccde9951e4fb 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -549,6 +549,22 @@ vreg_l19a_3p3: l19 {
};
};
+&sdc2_state_on {
+ sd-cd {
+ pins = "gpio54";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+};
+
+&sdc2_state_off {
+ sd-cd {
+ pins = "gpio54";
+ bias-disable;
+ drive-strength = <2>;
+ };
+};
+
&sdhc_1 {
status = "okay";
supports-cqe;
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 44f048934fc6..e6f06a548011 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -983,12 +983,6 @@ data {
bias-pull-up;
drive-strength = <10>;
};
-
- sd-cd {
- pins = "gpio54";
- bias-pull-up;
- drive-strength = <2>;
- };
};
sdc2_state_off: sdc2-off {
@@ -1009,12 +1003,6 @@ data {
bias-pull-up;
drive-strength = <2>;
};
-
- sd-cd {
- pins = "gpio54";
- bias-disable;
- drive-strength = <2>;
- };
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index 9280c1f0c334..2b1216502eb0 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -363,6 +363,22 @@ vreg_l19a_3p3: l19 {
};
};
+&sdc2_state_on {
+ sd-cd {
+ pins = "gpio54";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+};
+
+&sdc2_state_off {
+ sd-cd {
+ pins = "gpio54";
+ bias-disable;
+ drive-strength = <2>;
+ };
+};
+
&sdhc_1 {
status = "okay";
supports-cqe;
--
2.35.1
next prev parent reply other threads:[~2022-05-14 14:11 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-14 14:10 [PATCH v4 00/12] arm64: dts: qcom: initial Inforce IFC6560 board support Dmitry Baryshkov
2022-05-14 14:10 ` [PATCH v4 01/12] arm64: dts: qcom: sdm630: disable dsi0/dsi0_phy by default Dmitry Baryshkov
2022-05-14 14:44 ` Konrad Dybcio
2022-05-14 14:10 ` [PATCH v4 02/12] arm64: dts: qcom: sdm660: disable dsi1/dsi1_phy " Dmitry Baryshkov
2022-05-14 14:44 ` Konrad Dybcio
2022-05-14 14:45 ` Konrad Dybcio
2022-05-14 14:10 ` [PATCH v4 03/12] arm64: dts: qcom: sdm630: disable GPU " Dmitry Baryshkov
2022-05-14 14:10 ` [PATCH v4 04/12] arm64: dts: qcom: sdm630: fix the qusb2phy ref clock Dmitry Baryshkov
2022-05-14 14:10 ` [PATCH v4 05/12] arm64: dts: qcom: sdm630: rename qusb2phy to qusb2phy0 Dmitry Baryshkov
2022-05-14 14:46 ` Konrad Dybcio
2022-05-14 14:10 ` [PATCH v4 06/12] arm64: dts: qcom: sdm630: add second (HS) USB host support Dmitry Baryshkov
2022-05-14 14:10 ` [PATCH v4 07/12] arm64: dts: qcom: sdm630: fix gpu's interconnect path Dmitry Baryshkov
2022-05-14 14:10 ` [PATCH v4 08/12] arm64: dts: qcom: sdm630: use defined symbols for interconnects Dmitry Baryshkov
2022-05-14 14:10 ` [PATCH v4 09/12] arm64: dts: qcom: sdm636-sony-xperia-ganges-mermaid: correct sdc2 pinconf Dmitry Baryshkov
2022-05-14 14:50 ` Konrad Dybcio
2022-05-14 14:10 ` Dmitry Baryshkov [this message]
2022-05-14 14:10 ` [PATCH v4 11/12] arm64: dts: qcom: sdm660: Add initial Inforce IFC6560 board support Dmitry Baryshkov
2022-05-14 14:43 ` Konrad Dybcio
2022-05-14 18:51 ` Dmitry Baryshkov
2022-05-14 19:44 ` Konrad Dybcio
2022-05-14 14:10 ` [PATCH v4 12/12] dt-bindings: arm: qcom: document sda660 SoC and ifc6560 board Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220514141041.3158521-11-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzk@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).