linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Gonzalez <marc.w.gonzalez@free.fr>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: MSM <linux-arm-msm@vger.kernel.org>,
	gpio <linux-gpio@vger.kernel.org>,
	Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Subject: [PATCH v1] pinctrl: msm8998: Squash TSIF pins together
Date: Wed, 26 Jun 2019 16:38:58 +0200	[thread overview]
Message-ID: <57d0644d-164f-58e7-6c07-9608da4233a3@free.fr> (raw)
In-Reply-To: <20190620184124.GB24205@tuxbook-pro>

Preamble: Rename tsif1 to tsif0, tsif2 to tsif1.
Squash tsif0 pins into a single function. Same for tsif1.

Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
---
 .../bindings/pinctrl/qcom,msm8998-pinctrl.txt | 19 ++---
 drivers/pinctrl/qcom/pinctrl-msm8998.c        | 76 +++++--------------
 2 files changed, 24 insertions(+), 71 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
index 00174f08ba1d..47b0f30a39e9 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
@@ -124,9 +124,8 @@ to specify in a pin configuration subnode:
 		    qlink_request, qua_mi2s, sd_card, sd_write, sdc40, sdc41,
 		    sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu,
 		    spkr_i2s, ssbi1, ssc_irq, ter_mi2s, tgu_ch0, tgu_ch1,
-		    tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en,
-		    tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en,
-		    tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
+		    tsense_pwm1, tsense_pwm2, tsif0, tsif1,
+		    uim1_clk, uim1_data, uim1_present,
 		    uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
 		    uim_batt, usb_phy, vfr_1, vsense_clkout, vsense_data0,
 		    vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1,
@@ -179,15 +178,9 @@ Example:
 		#interrupt-cells = <2>;
 
 		uart_console_active: uart_console_active {
-			mux {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart8_a";
-			};
-
-			config {
-				pins = "gpio4", "gpio5";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio4", "gpio5";
+			function = "blsp_uart8_a";
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8998.c b/drivers/pinctrl/qcom/pinctrl-msm8998.c
index 00d7b94bc3f1..a05f41fe2706 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm8998.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8998.c
@@ -581,16 +581,8 @@ enum msm8998_functions {
 	msm_mux_tgu_ch1,
 	msm_mux_tsense_pwm1,
 	msm_mux_tsense_pwm2,
-	msm_mux_tsif1_clk,
-	msm_mux_tsif1_data,
-	msm_mux_tsif1_en,
-	msm_mux_tsif1_error,
-	msm_mux_tsif1_sync,
-	msm_mux_tsif2_clk,
-	msm_mux_tsif2_data,
-	msm_mux_tsif2_en,
-	msm_mux_tsif2_error,
-	msm_mux_tsif2_sync,
+	msm_mux_tsif0,
+	msm_mux_tsif1,
 	msm_mux_uim1_clk,
 	msm_mux_uim1_data,
 	msm_mux_uim1_present,
@@ -692,9 +684,6 @@ static const char * const atest_usb13_groups[] = {
 static const char * const bimc_dte1_groups[] = {
 	"gpio8", "gpio10",
 };
-static const char * const tsif1_sync_groups[] = {
-	"gpio9",
-};
 static const char * const wlan1_adc0_groups[] = {
 	"gpio9",
 };
@@ -863,9 +852,6 @@ static const char * const lpass_slimbus_groups[] = {
 static const char * const sd_write_groups[] = {
 	"gpio40",
 };
-static const char * const tsif1_error_groups[] = {
-	"gpio40",
-};
 static const char * const blsp_spi6_groups[] = {
 	"gpio41", "gpio42", "gpio43", "gpio44",
 };
@@ -1048,11 +1034,8 @@ static const char * const blsp_uim2_b_groups[] = {
 static const char * const blsp_i2c5_groups[] = {
 	"gpio87", "gpio88",
 };
-static const char * const tsif1_clk_groups[] = {
-	"gpio89",
-};
-static const char * const tsif1_en_groups[] = {
-	"gpio90",
+static const char * const tsif0_groups[] = {
+	"gpio9", "gpio40", "gpio89", "gpio90", "gpio91",
 };
 static const char * const mdp_vsync0_groups[] = {
 	"gpio90",
@@ -1075,17 +1058,14 @@ static const char * const tgu_ch0_groups[] = {
 static const char * const qdss_cti1_b_groups[] = {
 	"gpio90", "gpio91",
 };
-static const char * const tsif1_data_groups[] = {
-	"gpio91",
-};
 static const char * const sdc4_cmd_groups[] = {
 	"gpio91",
 };
 static const char * const tgu_ch1_groups[] = {
 	"gpio91",
 };
-static const char * const tsif2_error_groups[] = {
-	"gpio92",
+static const char * const tsif1_groups[] = {
+	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96",
 };
 static const char * const sdc43_groups[] = {
 	"gpio92",
@@ -1093,30 +1073,18 @@ static const char * const sdc43_groups[] = {
 static const char * const vfr_1_groups[] = {
 	"gpio92",
 };
-static const char * const tsif2_clk_groups[] = {
-	"gpio93",
-};
 static const char * const sdc4_clk_groups[] = {
 	"gpio93",
 };
-static const char * const tsif2_en_groups[] = {
-	"gpio94",
-};
 static const char * const sdc42_groups[] = {
 	"gpio94",
 };
 static const char * const sd_card_groups[] = {
 	"gpio95",
 };
-static const char * const tsif2_data_groups[] = {
-	"gpio95",
-};
 static const char * const sdc41_groups[] = {
 	"gpio95",
 };
-static const char * const tsif2_sync_groups[] = {
-	"gpio96",
-};
 static const char * const sdc40_groups[] = {
 	"gpio96",
 };
@@ -1355,16 +1323,8 @@ static const struct msm_function msm8998_functions[] = {
 	FUNCTION(tgu_ch1),
 	FUNCTION(tsense_pwm1),
 	FUNCTION(tsense_pwm2),
-	FUNCTION(tsif1_clk),
-	FUNCTION(tsif1_data),
-	FUNCTION(tsif1_en),
-	FUNCTION(tsif1_error),
-	FUNCTION(tsif1_sync),
-	FUNCTION(tsif2_clk),
-	FUNCTION(tsif2_data),
-	FUNCTION(tsif2_en),
-	FUNCTION(tsif2_error),
-	FUNCTION(tsif2_sync),
+	FUNCTION(tsif0),
+	FUNCTION(tsif1),
 	FUNCTION(uim1_clk),
 	FUNCTION(uim1_data),
 	FUNCTION(uim1_present),
@@ -1396,7 +1356,7 @@ static const struct msm_pingroup msm8998_groups[] = {
 	PINGROUP(6, WEST, blsp_spi8, blsp_uart8_a, blsp_i2c8, _, _, _, _, _, _),
 	PINGROUP(7, WEST, blsp_spi8, blsp_uart8_a, blsp_i2c8, ddr_bist, _, atest_tsens2, atest_usb1, _, _),
 	PINGROUP(8, EAST, blsp_spi4, blsp_uart1_b, blsp_uim1_b, _, ddr_bist, _, wlan1_adc1, atest_usb13, bimc_dte1),
-	PINGROUP(9, EAST, blsp_spi4, blsp_uart1_b, blsp_uim1_b, tsif1_sync, ddr_bist, _, wlan1_adc0, atest_usb12, bimc_dte0),
+	PINGROUP(9, EAST, blsp_spi4, blsp_uart1_b, blsp_uim1_b, tsif0, ddr_bist, _, wlan1_adc0, atest_usb12, bimc_dte0),
 	PINGROUP(10, EAST, mdp_vsync_a, blsp_spi4, blsp_uart1_b, blsp_i2c4, ddr_bist, atest_gpsadc1, wlan2_adc1, atest_usb11, bimc_dte1),
 	PINGROUP(11, EAST, mdp_vsync_a, edp_lcd, blsp_spi4, blsp_uart1_b, blsp_i2c4, dbg_out, atest_gpsadc0, wlan2_adc0, atest_usb10),
 	PINGROUP(12, EAST, mdp_vsync, m_voc, _, _, _, _, _, _, _),
@@ -1427,7 +1387,7 @@ static const struct msm_pingroup msm8998_groups[] = {
 	PINGROUP(37, NORTH, agera_pll, _, _, _, _, _, _, _, _),
 	PINGROUP(38, WEST, usb_phy, _, _, _, _, _, _, _, _),
 	PINGROUP(39, WEST, lpass_slimbus, _, _, _, _, _, _, _, _),
-	PINGROUP(40, EAST, sd_write, tsif1_error, _, _, _, _, _, _, _),
+	PINGROUP(40, EAST, sd_write, tsif0, _, _, _, _, _, _, _),
 	PINGROUP(41, EAST, blsp_spi6, blsp_uart3_b, blsp_uim3_b, _, qdss, _, _, _, _),
 	PINGROUP(42, EAST, blsp_spi6, blsp_uart3_b, blsp_uim3_b, _, qdss, _, _, _, _),
 	PINGROUP(43, EAST, blsp_spi6, blsp_uart3_b, blsp_i2c6, _, qdss, _, _, _, _),
@@ -1476,14 +1436,14 @@ static const struct msm_pingroup msm8998_groups[] = {
 	PINGROUP(86, EAST, blsp_spi5, blsp_uart2_b, blsp_uim2_b, _, _, _, _, _, _),
 	PINGROUP(87, EAST, blsp_spi5, blsp_uart2_b, blsp_i2c5, _, _, _, _, _, _),
 	PINGROUP(88, EAST, blsp_spi5, blsp_uart2_b, blsp_i2c5, _, _, _, _, _, _),
-	PINGROUP(89, EAST, tsif1_clk, phase_flag, _, _, _, _, _, _, _),
-	PINGROUP(90, EAST, tsif1_en, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, blsp1_spi, tgu_ch0, qdss_cti1_b, _),
-	PINGROUP(91, EAST, tsif1_data, sdc4_cmd, tgu_ch1, phase_flag, qdss_cti1_b, _, _, _, _),
-	PINGROUP(92, EAST, tsif2_error, sdc43, vfr_1, phase_flag, _, _, _, _, _),
-	PINGROUP(93, EAST, tsif2_clk, sdc4_clk, _, qdss, _, _, _, _, _),
-	PINGROUP(94, EAST, tsif2_en, sdc42, _, _, _, _, _, _, _),
-	PINGROUP(95, EAST, tsif2_data, sdc41, _, _, _, _, _, _, _),
-	PINGROUP(96, EAST, tsif2_sync, sdc40, phase_flag, _, _, _, _, _, _),
+	PINGROUP(89, EAST, tsif0, phase_flag, _, _, _, _, _, _, _),
+	PINGROUP(90, EAST, tsif0, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, blsp1_spi, tgu_ch0, qdss_cti1_b, _),
+	PINGROUP(91, EAST, tsif0, sdc4_cmd, tgu_ch1, phase_flag, qdss_cti1_b, _, _, _, _),
+	PINGROUP(92, EAST, tsif1, sdc43, vfr_1, phase_flag, _, _, _, _, _),
+	PINGROUP(93, EAST, tsif1, sdc4_clk, _, qdss, _, _, _, _, _),
+	PINGROUP(94, EAST, tsif1, sdc42, _, _, _, _, _, _, _),
+	PINGROUP(95, EAST, tsif1, sdc41, _, _, _, _, _, _, _),
+	PINGROUP(96, EAST, tsif1, sdc40, phase_flag, _, _, _, _, _, _),
 	PINGROUP(97, WEST, _, mdp_vsync_b, ldo_en, _, _, _, _, _, _),
 	PINGROUP(98, WEST, _, mdp_vsync_b, ldo_update, _, _, _, _, _, _),
 	PINGROUP(99, WEST, _, _, _, _, _, _, _, _, _),
-- 
2.17.1

  reply	other threads:[~2019-06-26 14:39 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-11 16:12 How to write "modern" pinctrl DT node Marc Gonzalez
2019-06-11 16:50 ` Jonathan Neuschäfer
2019-06-11 18:05 ` Bjorn Andersson
2019-06-20 11:02   ` Marc Gonzalez
2019-06-20 18:41     ` Bjorn Andersson
2019-06-26 14:38       ` Marc Gonzalez [this message]
2019-06-26 14:42         ` [PATCH v1] pinctrl: msm8998: Squash TSIF pins together Jeffrey Hugo
2019-06-26 14:46           ` Marc Gonzalez
2019-06-26 15:30         ` Jonathan Neuschäfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57d0644d-164f-58e7-6c07-9608da4233a3@free.fr \
    --to=marc.w.gonzalez@free.fr \
    --cc=bjorn.andersson@linaro.org \
    --cc=jeffrey.l.hugo@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).