messages from 2021-03-25 23:12:16 to 2021-03-30 01:29:27 UTC [more...]
[PATCH v1 0/7] MHI Emergency download and flash programmer support
2021-03-30 1:28 UTC (8+ messages)
` [PATCH v1 1/7] bus: mhi: core: Rely on accurate method to determine EDL mode
` [PATCH v1 2/7] bus: mhi: core: Wait for ready after an EDL firmware download
` [PATCH v1 3/7] bus: mhi: core: Handle EDL mode entry appropriately
` [PATCH v1 4/7] bus: mhi: core: Add support for Flash Programmer execution environment
` [PATCH v1 5/7] bus: mhi: core: Identify Flash Programmer as a mission mode use case
` [PATCH v1 6/7] bus: mhi: core: Wait for MHI READY state in most scenarios
` [PATCH v1 7/7] bus: mhi: core: Improve state strings for debug messages
[PATCH v3 00/25] drm/msm/dsi: refactor MSM DSI PHY/PLL drivers
2021-03-30 0:50 UTC (37+ messages)
` [PATCH v3 01/25] clk: fixed: add devm helper for clk_hw_register_fixed_factor()
` [PATCH v3 02/25] clk: mux: provide devm_clk_hw_register_mux()
` [PATCH v3 03/25] clk: divider: add devm_clk_hw_register_divider
` [PATCH v3 04/25] drm/msm/dsi: replace PHY's init callback with configurable data
` [PATCH v3 06/25] drm/msm/dsi: drop multiple pll enable_seq support
` [PATCH v3 07/25] drm/msm/dsi: move all PLL callbacks into PHY config struct
` [PATCH v3 08/25] drm/msm/dsi: drop global msm_dsi_phy_type enumaration
` [PATCH v3 09/25] drm/msm/dsi: move min/max PLL rate to phy config
` [PATCH v3 10/25] drm/msm/dsi: remove msm_dsi_pll_set_usecase
` [PATCH v3 11/25] drm/msm/dsi: push provided clocks handling into a generic code
` [Freedreno] "
` [PATCH v3 12/25] drm/msm/dsi: use devm_clk_*register to registe DSI PHY clocks
` [Freedreno] "
` [PATCH v3 13/25] drm/msm/dsi: use devm_of_clk_add_hw_provider
` [Freedreno] "
` [PATCH v3 14/25] drm/msm/dsi: make save/restore_state phy-level functions
` [Freedreno] "
` [PATCH v3 15/25] drm/msm/dsi: drop vco_delay setting from 7nm, 10nm, 14nm drivers
` [Freedreno] "
` [PATCH v3 16/25] drm/msm/dpu: simplify vco_delay handling in dsi_phy_28nm driver
` [Freedreno] "
` [PATCH v3 17/25] drm/msi/dsi: inline msm_dsi_pll_helper_clk_prepare/unprepare
` [Freedreno] "
` [PATCH v3 18/25] drm/msm/dsi: make save_state/restore_state callbacks accept msm_dsi_phy
` [PATCH v3 19/25] drm/msm/dsi: drop msm_dsi_pll abstracton
` [PATCH v3 20/25] drm/msm/dsi: drop PLL accessor functions
` [PATCH v3 21/25] drm/msm/dsi: move ioremaps to dsi_phy_driver_probe
` [PATCH v3 22/25] drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances
` [PATCH v3 23/25] drm/msm/dsi: remove temp data from global pll structure
` [PATCH v3 24/25] drm/msm/dsi: inline msm_dsi_phy_set_src_pll
` [PATCH v3 25/25] drm/msm/dsi: stop passing src_pll_id to the phy_enable call
[PATCH v13 0/2] Enable power management for ufs wlun
2021-03-29 22:48 UTC (2+ messages)
[PATCH AUTOSEL 4.19 08/15] drm/msm: Ratelimit invalid-fence message
2021-03-29 22:23 UTC
[PATCH AUTOSEL 4.9 05/10] drm/msm: Ratelimit invalid-fence message
2021-03-29 22:23 UTC
[PATCH AUTOSEL 4.14 06/12] drm/msm: Ratelimit invalid-fence message
2021-03-29 22:23 UTC
[PATCH AUTOSEL 5.4 10/19] drm/msm/adreno: a5xx_power: Don't apply A540 lm_setup to other GPUs
2021-03-29 22:22 UTC (2+ messages)
` [PATCH AUTOSEL 5.4 11/19] drm/msm: Ratelimit invalid-fence message
[PATCH AUTOSEL 5.10 13/33] drm/msm/dsi_pll_7nm: Fix variable usage for pll_lockdet_rate
2021-03-29 22:22 UTC (4+ messages)
` [PATCH AUTOSEL 5.10 14/33] drm/msm/adreno: a5xx_power: Don't apply A540 lm_setup to other GPUs
` [PATCH AUTOSEL 5.10 15/33] drm/msm: Ratelimit invalid-fence message
` [PATCH AUTOSEL 5.10 21/33] drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume
[PATCH AUTOSEL 5.11 03/38] drm/msm: a6xx: Make sure the SQE microcode is safe
2021-03-29 22:21 UTC (5+ messages)
` [PATCH AUTOSEL 5.11 16/38] drm/msm/dsi_pll_7nm: Fix variable usage for pll_lockdet_rate
` [PATCH AUTOSEL 5.11 17/38] drm/msm/adreno: a5xx_power: Don't apply A540 lm_setup to other GPUs
` [PATCH AUTOSEL 5.11 18/38] drm/msm: Ratelimit invalid-fence message
` [PATCH AUTOSEL 5.11 24/38] drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume
[PATCH] ASoC: q6afe-clocks: fix reprobing of the driver
2021-03-29 21:26 UTC (3+ messages)
[PATCH v2] clk: qcom: camcc: Update the clock ops for the SC7180
2021-03-29 21:08 UTC (2+ messages)
[PATCH] MAINTAINERS: Add entry for Qualcomm IPC Router (QRTR) driver
2021-03-29 20:40 UTC (2+ messages)
[PATCH V2 0/5] Add driver support for Data Capture and Compare Engine(DCC) for SM8150
2021-03-29 20:09 UTC (21+ messages)
` [PATCH V2 1/5] dt-bindings: Added the yaml bindings for DCC
` [PATCH V2 2/5] soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC)
` [PATCH V2 3/5] DCC: Added the sysfs entries for DCC(Data Capture and Compare) driver
` [PATCH V3 0/5] Add driver support for Data Capture and Compare Engine(DCC) for SM8150
` [PATCH V3 1/5] dt-bindings: Added the yaml bindings for DCC
` [PATCH V3 2/5] soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC)
` [PATCH V3 3/5] DCC: Added the sysfs entries for DCC(Data Capture and Compare) driver
` [PATCH V3 4/5] MAINTAINERS: Add the entry for DCC(Data Capture and Compare) driver support
` [PATCH V3 5/5] arm64: dts: qcom: sm8150: Add Data Capture and Compare(DCC) support node
` [Resend PATCH V3 0/5] Add driver support for Data Capture and Compare Engine(DCC) for SM8150
` [Resend PATCH V3 1/5] dt-bindings: Added the yaml bindings for DCC
` [Resend PATCH V3 2/5] soc: qcom: dcc: Add driver support for Data Capture and Compare unit(DCC)
` [Resend PATCH V3 3/5] DCC: Added the sysfs entries for DCC(Data Capture and Compare) driver
` [Resend PATCH V3 4/5] MAINTAINERS:Add the entry for DCC(Data Capture and Compare) driver support
` [Resend PATCH V3 5/5] arm64: dts: qcom: sm8150: Add Data Capture and Compare(DCC) support node
[PATCH v5 0/2] Polling for MHI ready
2021-03-29 19:53 UTC (3+ messages)
` [PATCH v5 1/2] bus: mhi: core: Introduce internal register poll helper function
` [PATCH v5 2/2] bus: mhi: core: Move to polling method to wait for MHI ready
[PATCH v4 0/4] arm64: dts: qcom: sm8250: fix display nodes
2021-03-29 19:29 UTC (8+ messages)
` [PATCH v4 1/4] "
` [PATCH v4 2/4] dt-bindings: msm/disp: add compatibles for sm8150/sm8250 display
` [PATCH v4 3/4] drm/msm: "
` [PATCH v4 4/4] arm64: dts: qcom: sm8250: fix display nodes
[PATCH 1/2] iommu/arm-smmu-qcom: Skip the TTBR1 quirk for db820c
2021-03-29 17:55 UTC (4+ messages)
` [PATCH 2/2] arm64: dts: msm8996: Mark the GPU's SMMU as an adreno one
[RFC PATCH 1/3] dt-bindings: display: simple: Add the panel on sc7180-trogdor-pompom
2021-03-29 16:25 UTC (16+ messages)
[PATCH V2] arm64: dts: qcom: sc7280: Add nodes for eMMC and SD card
2021-03-29 14:56 UTC (5+ messages)
[PATCH v2 05/20] drm/dp: Add backpointer to drm_device in drm_dp_aux
2021-03-29 7:08 UTC (4+ messages)
` [PATCH v2 08/20] drm/dp: Pass drm_dp_aux to drm_dp_link_train_clock_recovery_delay()
` [PATCH v2 09/20] drm/dp: Pass drm_dp_aux to drm_dp*_link_train_channel_eq_delay()
[PATCH v14 1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings
2021-03-29 3:19 UTC (7+ messages)
` [PATCH v14 3/4] dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings
` [PATCH v14 4/4] dt-bindings: msm/dp: Add bindings of MSM DisplayPort controller
[PATCH 0/5] Samsung Galaxy S III Neo Initial DTS
2021-03-29 0:50 UTC (11+ messages)
` [PATCH 1/5] dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
` [PATCH 2/5] clk: qcom: gcc: Add support for Global Clock controller found on MSM8226
` [PATCH 3/5] arm: dts: qcom: Add support for MSM8226 SoC
` [PATCH 4/5] dt-bindings: arm: qcom: Document MSM8226 SoC binding
` [PATCH 5/5] arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone
[PATCH v5 0/7] phy: qcom-qmp: provide DP phy support for sm8250
2021-03-28 20:52 UTC (8+ messages)
` [PATCH v5 1/7] dt-bindings: phy: qcom,qmp-usb3-dp-phy: move usb3 compatibles back to qcom,qmp-phy.yaml
` [PATCH v5 2/7] dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SM8250
` [PATCH v5 3/7] phy: qcom-qmp: move DP functions to callbacks
` [PATCH v5 4/7] phy: qcom-qmp: rename common registers
` [PATCH v5 5/7] phy: qcom-qmp: add support for sm8250-usb3-dp phy
` [PATCH v5 6/7] arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode
` [PATCH v5 7/7] arm64: dts: qcom: use dp_phy to provide clocks to dispcc
[PATCH] MAINTAINERS: icc: add interconnect tree
2021-03-28 17:16 UTC
[PATCH] iommu/arm-smmu-qcom: create qcom_smmu_impl for ACPI boot
2021-03-28 8:44 UTC (6+ messages)
[PATCH v4 0/7] phy: qcom-qmp: provide DP phy support for sm8250
2021-03-27 18:24 UTC (11+ messages)
` [PATCH v4 1/7] dt-bindings: phy: qcom,qmp-usb3-dp-phy: move usb3 compatibles back to qcom,qmp-phy.yaml
` [PATCH v4 2/7] dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SM8250
` [PATCH v4 3/7] phy: qcom-qmp: move DP functions to callbacks
` [PATCH v4 4/7] phy: qcom-qmp: rename common registers
` [PATCH v4 5/7] phy: qcom-qmp: add support for sm8250-usb3-dp phy
` [PATCH v4 6/7] arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode
` [PATCH v4 7/7] arm64: dts: qcom: use dp_phy to provide clocks to dispcc
[PATCH 1/2] dt-bindings: nvmem: Add SoC compatible for sc7280
2021-03-27 17:40 UTC (2+ messages)
(No Subject)
2021-03-27 16:40 UTC (3+ messages)
` [PATCH v2 3/3] dt-bindings: qcom: geni-se: document iommus
[PATCH v3 1/2] dt-bindings: thermal: qcom-tsens: Add compatible for sm8350
2021-03-27 15:19 UTC (2+ messages)
[PATCH v1 00/15] clk: qcom: cleanup sm8250/sdm845/sc7180 clock drivers
2021-03-27 8:13 UTC (4+ messages)
` [PATCH v1 06/15] clk: qcom: videocc-sc7180: drop unused enum entries
[PATCH 0/2] kernel-doc and MAINTAINERS clean-up
2021-03-27 6:56 UTC (3+ messages)
` [PATCH 1/2] MAINTAINERS: add another entry for ARM/QUALCOMM SUPPORT
` [PATCH 2/2] soc: qcom: address kernel-doc warnings
[PATCH] clk: qcom: camcc: Update the clock ops for the SC7180
2021-03-27 1:52 UTC (3+ messages)
[PATCH v2 00/28] drm/msm/dsi: refactor MSM DSI PHY/PLL drivers
2021-03-27 0:58 UTC (24+ messages)
` [PATCH v2 01/28] clk: fixed: add devm helper for clk_hw_register_fixed_factor()
` [Freedreno] "
` [PATCH v2 02/28] clk: mux: provide devm_clk_hw_register_mux()
` [Freedreno] "
` [PATCH v2 03/28] clk: divider: add devm_clk_hw_register_divider
` [Freedreno] "
` [PATCH v2 04/28] drm/msm/dsi: replace PHY's init callback with configurable data
` [Freedreno] "
` [PATCH v2 06/28] drm/msm/dsi: drop multiple pll enable_seq support
` [Freedreno] "
` [PATCH v2 07/28] drm/msm/dsi: move all PLL callbacks into PHY config struct
` [Freedreno] "
` [PATCH v2 08/28] drm/msm/dsi: drop global msm_dsi_phy_type enumaration
` [Freedreno] "
` [PATCH v2 09/28] drm/msm/dsi: move min/max PLL rate to phy config
` [Freedreno] "
` [PATCH v2 10/28] drm/msm/dsi: remove msm_dsi_pll_set_usecase
` [Freedreno] "
` [PATCH v2 11/28] drm/msm/dsi: stop setting clock parents manually
` [Freedreno] "
[PATCH V2 5/5] arm64: dts: qcom: sm8150: Add Data Capture and Compare(DCC) support node
2021-03-26 22:08 UTC (2+ messages)
[RESEND PATCH v4 1/2] dt-bindings: tsens: qcom: Document MDM9607 compatible
2021-03-26 21:17 UTC (2+ messages)
[PATCH v7 1/3] usb: dwc3: qcom: Add missing DWC3 OF node refcount decrement
2021-03-26 19:55 UTC (8+ messages)
[PATCH v2] media: venus : hfi: add venus image info into smem
2021-03-26 18:53 UTC (3+ messages)
[PATCH v3] ARM: kernel: Fix interrupted SMC calls
2021-03-26 18:22 UTC
[PATCH v3 0/6] phy: qcom-qmp: provide DP phy support for sm8250
2021-03-26 17:44 UTC (4+ messages)
` [PATCH v3 1/6] dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SM8250
[PATCH v1] usb: dwc3: core: Add shutdown callback for dwc3
2021-03-26 13:37 UTC (2+ messages)
[PATCH 0/3] drivers: iommu coding style fix
2021-03-26 9:37 UTC (4+ messages)
` [PATCH 1/3] drivers: iommu - "
` [PATCH 2/3] drivers: iommu/amd "
` [PATCH 3/3] drivers: iommu/arm "
[PATCH -next v2] remoteproc: qcom: wcss: Fix wrong pointer passed to PTR_ERR()
2021-03-26 8:12 UTC (2+ messages)
[PATCH 1/3] drm/msm/dp: Fix indentation kbot warnings in DP driver
2021-03-26 1:18 UTC (6+ messages)
` [PATCH 2/3] drm/msm/dp: Fix incorrect NULL check "
` [PATCH 3/3] drm/msm/dp: delete unnecessary debugfs error handling
[PATCH v3 0/2] interconnect: qcom: Add SM8350 support
2021-03-26 1:01 UTC (3+ messages)
` [PATCH v3 1/2] dt-bindings: interconnect: Add Qualcomm SM8350 DT bindings
[pull] drm/msm: drm-msm-fixes-2021-02-25 for v5.12-rc5
2021-03-26 0:57 UTC
[PATCH 0/3] Add DT bindings and DT nodes for USB in SC7280
2021-03-26 0:22 UTC (3+ messages)
` [PATCH 1/3] dt-bindings: usb: qcom,dwc3: Add bindings for SC7280
[PATCH v1 0/6] Add support for DISP/VIDEO/GPU CCs for SC7280
2021-03-26 0:11 UTC (3+ messages)
` [PATCH v1 1/6] dt-bindings: clock: Add SC7280 DISPCC clock binding
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).