linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Duke Xin(辛安文)" <duke.xin@quectel.com>
To: "Manivannan Sadhasivam" <mani@kernel.org>,
	"Duke Xin(辛安文)" <duke_xinanwen@163.com>
Cc: "loic.poulain@linaro.org" <loic.poulain@linaro.org>,
	"slark_xiao@163.com" <slark_xiao@163.com>,
	"fabio.porcedda@gmail.com" <fabio.porcedda@gmail.com>,
	"koen.vandeputte@citymesh.com" <koen.vandeputte@citymesh.com>,
	"quic_jhugo@quicinc.com" <quic_jhugo@quicinc.com>,
	"johan+linaro@kernel.org" <johan+linaro@kernel.org>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"mhi@lists.linux.dev" <mhi@lists.linux.dev>,
	"linux-arm-msm@vger.kernel.org" <linux-arm-msm@vger.kernel.org>,
	"Jerry Meng(蒙杰)" <jerry.meng@quectel.com>
Subject: 回复: [PATCH v6] bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL modem
Date: Wed, 7 Jun 2023 11:11:58 +0000	[thread overview]
Message-ID: <SEZPR06MB60878112EE8EEEC73B1400848453A@SEZPR06MB6087.apcprd06.prod.outlook.com> (raw)
In-Reply-To: <20230606113145.GB51623@thinkpad>

Hi Mani


Deeply sorry, I will carefully check and resubmit according to [patch submissioon guidelines].

Thank you for your review.


辛安文  Duke Xin | Software Department IX Engineer | Quectel Wireless Solutions Co., Ltd. 
            
Mobile: +86-15375456183 | Email : Duke.xin@quectel.com  | Tel: +86-0551-65869386-8632
Website: www.quectel.com  | QQ: 602659072 | Wechat: 15375456183

Building 1-C, China Speech Valley Area A, 3335 Xiyou Road, High-tech Zone, Hefei, Anhui 230088, China    
安徽省合肥市高新区习友路3335号中国(合肥)国际智能语音产业园A区1号中试楼 230088
HQ: Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 200233, China
总部:上海市闵行区田林路1016号科技绿洲3期(B区)5号楼  200233

-----邮件原件-----
发件人: Manivannan Sadhasivam <mani@kernel.org> 
发送时间: 2023年6月6日 19:32
收件人: Duke Xin(辛安文) <duke_xinanwen@163.com>
抄送: loic.poulain@linaro.org; slark_xiao@163.com; fabio.porcedda@gmail.com; koen.vandeputte@citymesh.com; quic_jhugo@quicinc.com; johan+linaro@kernel.org; bhelgaas@google.com; mhi@lists.linux.dev; linux-arm-msm@vger.kernel.org; Jerry Meng(蒙杰) <jerry.meng@quectel.com>; Duke Xin(辛安文) <duke.xin@quectel.com>
主题: Re: [PATCH v6] bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL modem

On Tue, Jun 06, 2023 at 03:39:32AM -0700, Duke Xin(辛安文) wrote:
> Add MHI interface definition for RM520 product based on Qualcomm SDX6X 
> chip
> 
> Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com>
> ---

What has changed since v1? Where is the changelog? I clearly mentioned that you need to add changelog and also keep the review tags given for earlier revisions.

I cannot repeat this message for every iteration. You are wasting everyone's time by not adhering to patch submissioon guidelines:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/5.Posting.rst

- Mani

>  drivers/bus/mhi/host/pci_generic.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/bus/mhi/host/pci_generic.c 
> b/drivers/bus/mhi/host/pci_generic.c
> index db0a0b062d8e..69be969672f1 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -334,6 +334,16 @@ static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = {
>  	.sideband_wake = true,
>  };
>  
> +static const struct mhi_pci_dev_info mhi_quectel_rm5xx_info = {
> +	.name = "quectel-rm5xx",
> +	.edl = "qcom/prog_firehose_sdx6x.elf",
> +	.config = &modem_quectel_em1xx_config,
> +	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
> +	.dma_data_width = 32,
> +	.mru_default = 32768,
> +	.sideband_wake = true,
> +};
> +
>  static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {
>  	MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 32, 0),
>  	MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 32, 0), @@ -573,6 +583,9 @@ 
> static const struct pci_device_id mhi_pci_id_table[] = {
>  		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1002), /* EM160R-GL (sdx24) */
>  		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
> +	/* RM520N-GL (sdx6x), eSIM */
> +	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1004),
> +		.driver_data = (kernel_ulong_t) &mhi_quectel_rm5xx_info },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x2001), /* EM120R-GL for FCCL (sdx24) */
>  		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
>  	/* T99W175 (sdx55), Both for eSIM and Non-eSIM */
> --
> 2.25.1
> 

-- 
மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2023-06-07 11:12 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-06 10:39 [PATCH v6] bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL modem Duke Xin(辛安文)
2023-06-06 11:31 ` Manivannan Sadhasivam
2023-06-07 11:11   ` Duke Xin(辛安文) [this message]
     [not found] <49141a5a22d12d7539ab567cd4e7629f30-6-23163.com@g.corp-email.com>
2023-06-30  6:23 ` Duke Xin(辛安文)
2023-07-12  6:53   ` 回复: " Duke Xin(辛安文)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=SEZPR06MB60878112EE8EEEC73B1400848453A@SEZPR06MB6087.apcprd06.prod.outlook.com \
    --to=duke.xin@quectel.com \
    --cc=bhelgaas@google.com \
    --cc=duke_xinanwen@163.com \
    --cc=fabio.porcedda@gmail.com \
    --cc=jerry.meng@quectel.com \
    --cc=johan+linaro@kernel.org \
    --cc=koen.vandeputte@citymesh.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=mani@kernel.org \
    --cc=mhi@lists.linux.dev \
    --cc=quic_jhugo@quicinc.com \
    --cc=slark_xiao@163.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).