Re: [PATCH v3] arm64: dts: qcom: sc7180: Add DisplayPort node

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Thu 03 Jun 11:37 CDT 2021, Kuogee Hsieh wrote:

> Add DP device node on sc7180.
> 
> Changes in v2:
> -- replace msm_dp with dp
> -- replace dp_opp_table with opp_table
> 
> Changes in v3:
> -- correct text of commit title

In addition to the feedback I gave on v2, please also remove one of the
two spaces between "DisplayPort" and "node" in $subject.

Thanks,
Bjorn

> 
> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi |  9 ++++
>  arch/arm64/boot/dts/qcom/sc7180.dtsi         | 78 ++++++++++++++++++++++++++++
>  2 files changed, 87 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index 24d293e..40367a2 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -786,6 +786,15 @@ hp_i2c: &i2c9 {
>  	status = "okay";
>  };
>  
> +&dp {
> +        status = "okay";
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&dp_hot_plug_det>;
> +        data-lanes = <0 1>;
> +        vdda-1p2-supply = <&vdda_usb_ss_dp_1p2>;
> +        vdda-0p9-supply = <&vdda_usb_ss_dp_core>;
> +};
> +
>  &pm6150_adc {
>  	charger-thermistor@4f {
>  		reg = <ADC5_AMUX_THM3_100K_PU>;
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 6228ba2..05a4133 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -3032,6 +3032,13 @@
>  							remote-endpoint = <&dsi0_in>;
>  						};
>  					};
> +
> +					port@2 {
> +						reg = <2>;
> +						dpu_intf0_out: endpoint {
> +							remote-endpoint = <&dp_in>;
> +						};
> +					};
>  				};
>  
>  				mdp_opp_table: mdp-opp-table {
> @@ -3148,6 +3155,77 @@
>  
>  				status = "disabled";
>  			};
> +
> +			dp: displayport-controller@ae90000 {
> +				compatible = "qcom,sc7180-dp";
> +				status = "disabled";
> +
> +				reg = <0 0x0ae90000 0 0x1400>;
> +
> +				interrupt-parent = <&mdss>;
> +				interrupts = <12>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
> +					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
> +				clock-names = "core_iface", "core_aux", "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +				#clock-cells = <1>;
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
> +						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
> +				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
> +				phys = <&dp_phy>;
> +				phy-names = "dp";
> +
> +				operating-points-v2 = <&opp_table>;
> +				power-domains = <&rpmhpd SC7180_CX>;
> +
> +				#sound-dai-cells = <0>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					port@0 {
> +						reg = <0>;
> +						dp_in: endpoint {
> +							remote-endpoint = <&dpu_intf0_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +						dp_out: endpoint { };
> +					};
> +				};
> +
> +				opp_table: dp-opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +
> +
>  		};
>  
>  		dispcc: clock-controller@af00000 {
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>