Re: [PATCH v3 1/2] arch: arm64: dts: qcom: Add support for SM6125

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Wed 16 Jun 08:01 CDT 2021, Martin Botka wrote:

> 
> 
> On Tue, Jun 15 2021 at 07:29:49 PM -0500, Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> > On Sun 13 Jun 03:05 CDT 2021, Martin Botka wrote:
> > 
> > >  This commits adds the Device tree file for SM6125 SoC.
> > > 
> > >  Signed-off-by: Martin Botka <martin.botka@somainline.org>
> > 
> > Thanks for your work on this Martin, just spotted a few minor finishing
> > touches below.
> 
> :)
> 
> > 
> > >  ---
> > >  Changes in V2:
> > >  Update compatibles for mailbox & pinctrl
> > >  Changes in V3:
> > >  Fix reg for sdhci1
> > >  Replace hc_mem with hc and core_mem with core
> > >   arch/arm64/boot/dts/qcom/sm6125.dtsi | 603
> > > +++++++++++++++++++++++++++
> > >   1 file changed, 603 insertions(+)
> > >   create mode 100644 arch/arm64/boot/dts/qcom/sm6125.dtsi
> > > 
> > >  diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> > > b/arch/arm64/boot/dts/qcom/sm6125.dtsi
[..]
> > >  +			sdc2_state_off: sdc2-off {
> > 
> > This should be common between all boards (except possibly the cd line),
> > so this is okay to share here.
> 
> Do you want me to move the cd as well or
> do you want it to stay in here?
> 

While the pin assignment typically follows the reference design, in my
view it's just any random GPIO and hence better suited to live in the
board file.

Regards,
Bjorn