From: Can Guo <cang@codeaurora.org>
To: Asutosh Das <asutoshd@codeaurora.org>
Cc: martin.petersen@oracle.com, adrian.hunter@intel.com,
linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@wdc.com>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
Stanley Chu <stanley.chu@mediatek.com>,
Bean Huo <beanhuo@micron.com>,
Nitin Rawat <nitirawa@codeaurora.org>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v11 2/2] ufs: sysfs: Resume the proper scsi device
Date: Fri, 12 Mar 2021 09:25:14 +0800 [thread overview]
Message-ID: <c285d5d0b34c3375436724e43644efa5@codeaurora.org> (raw)
In-Reply-To: <fb3b49a985cea12b4db39f00d920c82a7c8be468.1615500685.git.asutoshd@codeaurora.org>
On 2021-03-12 06:19, Asutosh Das wrote:
> Resumes the actual scsi device the unit descriptor of which
> is being accessed instead of the hba alone.
>
> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
You lost my reviewed-by:
reviewed-by: Can Guo <cang@codeaurora.org>
> ---
> drivers/scsi/ufs/ufs-sysfs.c | 30 +++++++++++++++++-------------
> 1 file changed, 17 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs-sysfs.c
> b/drivers/scsi/ufs/ufs-sysfs.c
> index acc54f5..3fc182b 100644
> --- a/drivers/scsi/ufs/ufs-sysfs.c
> +++ b/drivers/scsi/ufs/ufs-sysfs.c
> @@ -245,9 +245,9 @@ static ssize_t wb_on_store(struct device *dev,
> struct device_attribute *attr,
> goto out;
> }
>
> - pm_runtime_get_sync(hba->dev);
> + scsi_autopm_get_device(hba->sdev_ufs_device);
> res = ufshcd_wb_ctrl(hba, wb_enable);
> - pm_runtime_put_sync(hba->dev);
> + scsi_autopm_put_device(hba->sdev_ufs_device);
> out:
> up(&hba->host_sem);
> return res < 0 ? res : count;
> @@ -297,10 +297,10 @@ static ssize_t ufs_sysfs_read_desc_param(struct
> ufs_hba *hba,
> goto out;
> }
>
> - pm_runtime_get_sync(hba->dev);
> + scsi_autopm_get_device(hba->sdev_ufs_device);
> ret = ufshcd_read_desc_param(hba, desc_id, desc_index,
> param_offset, desc_buf, param_size);
> - pm_runtime_put_sync(hba->dev);
> + scsi_autopm_put_device(hba->sdev_ufs_device);
> if (ret) {
> ret = -EINVAL;
> goto out;
> @@ -678,7 +678,7 @@ static ssize_t _name##_show(struct device
> *dev, \
> up(&hba->host_sem); \
> return -ENOMEM; \
> } \
> - pm_runtime_get_sync(hba->dev); \
> + scsi_autopm_get_device(hba->sdev_ufs_device); \
> ret = ufshcd_query_descriptor_retry(hba, \
> UPIU_QUERY_OPCODE_READ_DESC, QUERY_DESC_IDN_DEVICE, \
> 0, 0, desc_buf, &desc_len); \
> @@ -695,7 +695,7 @@ static ssize_t _name##_show(struct device
> *dev, \
> goto out; \
> ret = sysfs_emit(buf, "%s\n", desc_buf); \
> out: \
> - pm_runtime_put_sync(hba->dev); \
> + scsi_autopm_put_device(hba->sdev_ufs_device); \
> kfree(desc_buf); \
> up(&hba->host_sem); \
> return ret; \
> @@ -744,10 +744,10 @@ static ssize_t _name##_show(struct device
> *dev, \
> } \
> if (ufshcd_is_wb_flags(QUERY_FLAG_IDN##_uname)) \
> index = ufshcd_wb_get_query_index(hba); \
> - pm_runtime_get_sync(hba->dev); \
> + scsi_autopm_get_device(hba->sdev_ufs_device); \
> ret = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, \
> QUERY_FLAG_IDN##_uname, index, &flag); \
> - pm_runtime_put_sync(hba->dev); \
> + scsi_autopm_put_device(hba->sdev_ufs_device); \
> if (ret) { \
> ret = -EINVAL; \
> goto out; \
> @@ -813,10 +813,10 @@ static ssize_t _name##_show(struct device
> *dev, \
> } \
> if (ufshcd_is_wb_attrs(QUERY_ATTR_IDN##_uname)) \
> index = ufshcd_wb_get_query_index(hba); \
> - pm_runtime_get_sync(hba->dev); \
> + scsi_autopm_get_device(hba->sdev_ufs_device); \
> ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, \
> QUERY_ATTR_IDN##_uname, index, 0, &value); \
> - pm_runtime_put_sync(hba->dev); \
> + scsi_autopm_put_device(hba->sdev_ufs_device); \
> if (ret) { \
> ret = -EINVAL; \
> goto out; \
> @@ -899,11 +899,15 @@ static ssize_t _pname##_show(struct device
> *dev, \
> struct scsi_device *sdev = to_scsi_device(dev); \
> struct ufs_hba *hba = shost_priv(sdev->host); \
> u8 lun = ufshcd_scsi_to_upiu_lun(sdev->lun); \
> + int ret; \
> if (!ufs_is_valid_unit_desc_lun(&hba->dev_info, lun, \
> _duname##_DESC_PARAM##_puname)) \
> return -EINVAL; \
> - return ufs_sysfs_read_desc_param(hba, QUERY_DESC_IDN_##_duname, \
> + scsi_autopm_get_device(sdev); \
> + ret = ufs_sysfs_read_desc_param(hba, QUERY_DESC_IDN_##_duname, \
> lun, _duname##_DESC_PARAM##_puname, buf, _size); \
> + scsi_autopm_put_device(sdev); \
> + return ret; \
> } \
> static DEVICE_ATTR_RO(_pname)
>
> @@ -964,10 +968,10 @@ static ssize_t
> dyn_cap_needed_attribute_show(struct device *dev,
> goto out;
> }
>
> - pm_runtime_get_sync(hba->dev);
> + scsi_autopm_get_device(hba->sdev_ufs_device);
> ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
> QUERY_ATTR_IDN_DYN_CAP_NEEDED, lun, 0, &value);
> - pm_runtime_put_sync(hba->dev);
> + scsi_autopm_put_device(hba->sdev_ufs_device);
> if (ret) {
> ret = -EINVAL;
> goto out;
prev parent reply other threads:[~2021-03-12 1:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 22:19 [PATCH v11 0/2] Enable power management for ufs wlun Asutosh Das
2021-03-11 22:19 ` [PATCH v11 1/2] scsi: ufs: Enable power management for wlun Asutosh Das
2021-03-12 18:18 ` Jaegeuk Kim
2021-03-15 14:29 ` Adrian Hunter
2021-03-16 3:16 ` Asutosh Das (asd)
2021-03-18 19:03 ` Asutosh Das (asd)
2021-03-11 22:19 ` [PATCH v11 2/2] ufs: sysfs: Resume the proper scsi device Asutosh Das
2021-03-12 1:25 ` Can Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c285d5d0b34c3375436724e43644efa5@codeaurora.org \
--to=cang@codeaurora.org \
--cc=adrian.hunter@intel.com \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=jejb@linux.ibm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=nitirawa@codeaurora.org \
--cc=stanley.chu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).